Cybersecurity — RED Art. 3.3(d)(e)(f) + EN 18031 (Mandatory from 1 Aug 2025) + EU CRA 2027 (Austria / RTR)?

RED Art. 3.3(d)-(f) cybersecurity requirements, mandatory from 1 August 2025, represent the largest new compliance gap for Chinese Wi-Fi/IoT devices entering Austria. RTR enforces RED in Austria; German-language DoC citing EN 18031-1/2/3 is required. No Chinese regulatory equivalent exists. Manufacturers must conduct firmware/hardware gap assessments and implement EN 18031 security controls before Austrian market placement from 1 August 2025. The EU Cyber Resilience Act (CRA, Regulation (EU) 2024/2847) adds further mandatory cybersecurity obligations from 11 December 2027 — begin CRA readiness planning now.

Electrical Safety — RED Art. 3.1(a) + EN IEC 62368-1:2020+A11 + 230 V / Schuko Type F (Austria)?

EN IEC 62368-1:2020+A11:2021 is mandatory for safety compliance under RED Art. 3.1(a) in Austria. EN 60950-1 is no longer valid. Chinese CCC tests to GB 4943.1-2022 (2nd edition) do not cover EU A11 requirements. Mains-powered Class I devices must also be adapted for 230 V / Type F (Schuko) plug before Austrian market placement. Re-testing at an EU-recognised laboratory and a German-language DoC citing EN IEC 62368-1:2020+A11:2021 are required.

EMC Emissions — RED Art. 3.1(b) + EN 301 489-1 + EN 301 489-17 (Austria / RTR)?

RED Art. 3.1(b) EMC emissions compliance for Wi-Fi/Bluetooth devices in Austria requires EN 301 489-1 + EN 301 489-17 testing referenced in a German-language DoC. Chinese GB/T 9254.1 reports do not satisfy this pathway. RLAN-specific test modes in EN 301 489-17 require separate EU-accredited laboratory testing. RTR enforces RED compliance in Austria.

EMC Immunity — RED Art. 3.1(b) + EN 301 489-1 Immunity Levels (IEC 61000-4 Series)?

RED Art. 3.1(b) immunity compliance for Wi-Fi/IoT devices in Austria requires EN 301 489-1 v2.2.3 testing with IEC 61000-4 series severity levels. Chinese GB/T 17618 immunity reports are not equivalent. A German-language DoC must cite EN 301 489-1 for immunity. EU-accredited laboratory re-testing is required where only Chinese reports exist. RTR is the Austrian enforcement authority.

EU Authorised Representative, Importer Obligations, WEEE (EAK Austria), RoHS?

An EU Authorised Representative is a hard legal gate for Chinese manufacturers placing wireless/IoT devices on the Austrian market without an EU importer. EAK Austria WEEE registration is a separate Austrian national obligation not shared with Germany's EAR — manufacturers active in both markets need two separate WEEE registrations. RoHS 2 and REACH are parallel mandatory obligations. German-language labelling of the AR on the product or packaging is an Austrian documentation requirement.

Radio Equipment Directive — CE Marking, DoC, RTR, German Labelling, Schuko Type F?

CE marking under RED 2014/53/EU is mandatory for wireless/IoT devices entering Austria. RTR is the national enforcement authority. SRRC approval and CCC certification do not satisfy EU RED CE requirements. Austrian-specific obligations — German-language documentation, Type F (Schuko) plug compliance at 230 V/50 Hz, and WEEE registration with EAK Austria — add national-level obligations on top of EU baseline. Plan 3–6 months for full EU RED certification including testing, DoC in Deutsch, plug adaptation, and AR appointment.

CROSS-STANDARD public interest · Wireless / IoT device

China-to-Austria Wireless / IoT Device Compliance Gap Matrix

Name: China-to-Austria Wireless / IoT Device Compliance Gap Matrix
Creator: Cross-Standard
License: https://creativecommons.org/licenses/by/4.0/

AI-compiled from official public sources — cross-checked by multiple AI models, not human-verified. Informational only; see disclaimer. Public-interest, source-linked comparison of common China wireless and IoT device documentation against Austrian market requirements under EU Radio Equipment Directive (RED 2014/53/EU), enforced by RTR (Rundfunk und Telekom Regulierungs-GmbH). Covers radio performance, EMC, electrical safety (230 V / Type F Schuko), cybersecurity (mandatory from 1 August 2025 under EN 18031), German-language labelling, EU Authorised Representative, and WEEE registration with EAK Austria.

Dataset 2026-06-11 Last verified 2026-06-17 6 rows

GAP MATRIX

Compliance Gap Matrix

Gap matrix
Compliance item	Common China baseline	Austria (RTR / CE)	Gap / action	Source + verification date
Cybersecurity — RED Art. 3.3(d)(e)(f) + EN 18031 (Mandatory from 1 Aug 2025) + EU CRA 2027 (Austria / RTR)	China has IoT and network security standards including GB/T 36951-2018 (IoT sensor network node security technical requirements), GB/T 37093-2018 (IoT data security technical requirements), and MIIT Order No. 12 (2022) on IoT security administration. GB/T 15834 series covers network security more broadly. However, these Chinese standards differ substantially in scope, specific technical controls, and regulatory mechanism from EN 18031. None constitutes a mandatory pre-market cybersecurity certification pathway equivalent to RED Art. 3.3(d)-(f) as activated by Delegated Regulation (EU) 2022/30. China does not have a direct equivalent to the EU CRA.GB/T 36951-2018 — Information security technology; IoT sensor network node security technical requirements (SAMR/SAC) GB/T 37093-2018 — Information security technology; IoT data security technical requirements (SAMR/SAC) MIIT Order No. 12 (2022) — Administration of Internet of Things Security (MIIT)	Commission Delegated Regulation (EU) 2022/30 activated RED Article 3.3(d), (e), and (f) for categories of radio equipment, making cybersecurity essential requirements mandatory from 1 August 2025 (extended from 1 August 2024 by Commission Delegated Regulation (EU) 2023/2444). Applies in Austria, as in all EU member states, enforced by RTR. Scope: (d) internet-connected radio equipment; (e) radio equipment processing personal data, location data, or traffic data; (f) radio equipment that is a toy, childcare article, or wearable. The harmonised standards are EN 18031-1:2024 (network security for internet-connected radio equipment), EN 18031-2:2024 (privacy for radio equipment processing personal data), and EN 18031-3:2024 (protection from fraud), published in the Official Journal on 20 February 2025. Specific EN 18031-1 controls include: network interface disable capability, unique per-device credentials (no universal default passwords), software update mechanisms with integrity verification, encrypted data in transit, and minimisation of attack surface (unused ports/services disabled by default). Looking ahead: the EU Cyber Resilience Act (CRA, Regulation (EU) 2024/2847) entered into force on 10 December 2024, with main obligations applying from 11 December 2027. The CRA will impose mandatory cybersecurity requirements and vulnerability reporting for products with digital elements placed on the EU market, including Austria; manufacturers should begin CRA readiness assessments now.Directive 2014/53/EU (RED), Art. 3.3(d)(e)(f) — cybersecurity essential requirements; enforced in Austria by RTR Commission Delegated Regulation (EU) 2022/30 — activating RED Art. 3.3(d)(e)(f) for internet-connected and data-processing radio equipment Commission Delegated Regulation (EU) 2023/2444 — extending mandatory application date to 1 August 2025 EN 18031-1:2024 — Radio equipment; common security requirements; Part 1: Internet connected radio equipment (OJ 20 Feb 2025) EN 18031-2:2024 — Radio equipment; common security requirements; Part 2: Radio equipment processing personal data (OJ 20 Feb 2025) EN 18031-3:2024 — Radio equipment; common security requirements; Part 3: Radio equipment for child protection and toys (OJ 20 Feb 2025) Regulation (EU) 2024/2847 (EU Cyber Resilience Act / CRA) — mandatory cybersecurity for products with digital elements; main obligations from 11 December 2027	Significant gap effective 1 August 2025. EN 18031 cybersecurity requirements have no direct Chinese regulatory equivalent satisfying RED Art. 3.3(d)-(f). Austrian-specific context: RTR enforces RED cybersecurity requirements and can conduct market surveillance audits; German-language compliance documentation and DoC citing EN 18031 are required for the Austrian market. Specific EN 18031-1 controls absent from most China-designed IoT products include: (1) ability to disable all network access interfaces; (2) no universal default passwords — unique per-device credentials required; (3) secure update mechanism with cryptographic integrity verification; (4) encryption of all data in transit; (5) attack surface minimisation — unused network ports and services disabled by default. Additionally, the EU CRA (Regulation (EU) 2024/2847) will impose broader mandatory cybersecurity obligations for products with digital elements from 11 December 2027, including vulnerability disclosure, software bill of materials (SBOM), and a 10-year support period — manufacturers should begin CRA readiness assessment now to avoid a parallel compliance gap emerging in 2027.[INFORMATIONAL] RED Art. 3.3(d)-(f) cybersecurity requirements, mandatory from 1 August 2025, represent the largest new compliance gap for Chinese Wi-Fi/IoT devices entering Austria. RTR enforces RED in Austria; German-language DoC citing EN 18031-1/2/3 is required. No Chinese regulatory equivalent exists. Manufacturers must conduct firmware/hardware gap assessments and implement EN 18031 security controls before Austrian market placement from 1 August 2025. The EU Cyber Resilience Act (CRA, Regulation (EU) 2024/2847) adds further mandatory cybersecurity obligations from 11 December 2027 — begin CRA readiness planning now.	EUR-Lex / Official Journal of the European Union2026-06-17 · reference
Electrical Safety — RED Art. 3.1(a) + EN IEC 62368-1:2020+A11 + 230 V / Schuko Type F (Austria)	In China, the safety standard for information technology equipment is GB 4943.1-2022 (equivalent to IEC 62368-1:2018, second edition), mandatory for CCC-listed products under CNCA-C17-01 (SAMR). Chinese devices use 220 V AC / 50 Hz and GB 2099.1 / GB 1002 plug standards (Type A two-pin flat or Type I two/three-pin oblique flat). GB 4943.1-2022 tracks the IEC 62368-1 second edition, while the EU requires EN IEC 62368-1:2020+A11:2021 (third edition + EU amendment A11). The Chinese standard does not include EU-specific A11 amendment requirements (e.g., certain fire enclosure provisions, earthing conductor requirements). Chinese CCC safety test reports to GB 4943.1-2022 do not satisfy EU RED Art. 3.1(a) conformity.GB 4943.1-2022 — Information technology equipment; safety; Part 1: General requirements (equivalent to IEC 62368-1:2018 2nd edition) (SAMR/CNCA; mandatory under CCC for IT equipment) GB 2099.1 / GB 1002 — Chinese plug and socket standards (Type A/I, 220 V/50 Hz)	Radio equipment placed on the Austrian market must protect the health and safety of persons and property under RED 2014/53/EU Art. 3.1(a). The applicable harmonised safety standard for audio/video, information and communication technology equipment — including Wi-Fi routers, IoT gateways, smart home devices, and Bluetooth accessories — is EN IEC 62368-1:2020+A11:2021. This standard uses a hazard-based safety engineering (HBSE) approach covering electrical energy, thermal energy, mechanical energy, radiation, and chemical energy hazards. EN 60950-1 no longer provides presumption of conformity (transition ended 20 December 2020). Austria-specific safety considerations include: (1) mains supply at 230 V AC / 50 Hz — devices must be rated and tested for this voltage; (2) mains-connected Class I devices require a Type F (Schuko, CEE 7/4) earthed plug; Type C (Europlug, CEE 7/16) is only suitable for unearthed Class II devices rated ≤2.5 A — Class I devices need the Schuko grounded connection; (3) electrical safety oversight involves E-Control (Energie-Control Austria) for energy-related electrical aspects and BEV (Bundesamt für Eich- und Vermessungswesen) for metrology. Safety testing must be performed at an EU-recognised or ILAC MRA-member laboratory referencing EN IEC 62368-1:2020+A11:2021, not GB 4943.1.Directive 2014/53/EU (RED), Art. 3.1(a) — health and safety; enforced in Austria by RTR / BMAW EN IEC 62368-1:2020+A11:2021 — Audio/video, information and communication technology equipment; Part 1: Safety requirements (harmonised under RED and LVD) OVE EN 50075 / IEC 60083 — Austrian/EU plug and socket standards; Type F (Schuko CEE 7/4) mandatory for earthed Class I devices at 230 V/50 Hz E-Control (Energie-Control Austria) — oversight of energy-related electrical safety aspects in Austria	Three distinct safety gaps for Austria: (1) Standard edition — EU requires EN IEC 62368-1:2020+A11:2021 (3rd edition + A11); Chinese CCC testing uses GB 4943.1-2022 (2nd edition); A11 introduces additional EU-specific fire enclosure and earthing conductor requirements absent from GB 4943.1; (2) Voltage and plug — Chinese devices rated 220 V with Type A or Type I plugs must be re-rated and re-plugged for 230 V / Type F (Schuko) for Austrian Class I mains devices; (3) Language — the German-language DoC must cite EN IEC 62368-1:2020+A11:2021 for safety. Re-testing to the current EU harmonised standard at an EU-recognised laboratory is required; GB 4943.1-2022 CCC reports are insufficient. Plug adaptation to Schuko Type F is a physical product change required for mains-powered Class I devices.[INFORMATIONAL] EN IEC 62368-1:2020+A11:2021 is mandatory for safety compliance under RED Art. 3.1(a) in Austria. EN 60950-1 is no longer valid. Chinese CCC tests to GB 4943.1-2022 (2nd edition) do not cover EU A11 requirements. Mains-powered Class I devices must also be adapted for 230 V / Type F (Schuko) plug before Austrian market placement. Re-testing at an EU-recognised laboratory and a German-language DoC citing EN IEC 62368-1:2020+A11:2021 are required.	EUR-Lex / Official Journal of the European Union2026-06-17 · reference
EMC Emissions — RED Art. 3.1(b) + EN 301 489-1 + EN 301 489-17 (Austria / RTR)	In China, EMC emissions for wireless/IoT devices are primarily governed by GB/T 9254.1-2021 (Information technology equipment — Radio disturbance characteristics — limits and methods of measurement, equivalent to CISPR 32:2015). Products subject to CCC must be tested at a CNCA-designated laboratory. The Chinese standard broadly aligns with CISPR 32 emission limits, but EN 301 489-17 applies RLAN-specific duty-cycle averaging and test modes absent from GB/T 9254.1. Chinese test reports to GB/T 9254.1 cannot directly substitute for EN 301 489-1 + EN 301 489-17 compliance in the EU RED context.GB/T 9254.1-2021 — Information technology equipment; radio disturbance characteristics; emissions (equivalent to CISPR 32:2015) (SAMR/SAC)	Radio equipment placed on the Austrian market must protect the radio spectrum through emissions control under RED 2014/53/EU Art. 3.1(b). RTR monitors compliance in Austria. The applicable harmonised standard series is EN 301 489. For Wi-Fi (2.4 GHz / 5 GHz) and Bluetooth devices, the relevant parts are EN 301 489-1 v2.2.3 (common technical requirements — general) and EN 301 489-17 v3.2.4 (specific conditions for broadband data transmission systems — RLAN/Bluetooth). Together these two parts confer presumption of conformity with RED Art. 3.1(b) for conducted and radiated emissions. Emission limits reference CISPR 32 via the EN 301 489 framework. EN 301 489-17 applies radio-device-specific duty-cycle-adjusted emission averaging and RLAN-specific test modes. Testing must be performed at an ILAC MRA-accredited or EU-recognised laboratory referencing the EN 301 489 harmonised standards, not a Chinese GB/T equivalent. Test reports must identify the EN harmonised standard to support the DoC drafted in Deutsch.Directive 2014/53/EU (RED), Art. 3.1(b) — EMC / radio spectrum protection; enforced in Austria by RTR EN 301 489-1 v2.2.3 — Electromagnetic compatibility and radio spectrum matters; common technical requirements EN 301 489-17 v3.2.4 — Specific conditions for broadband data transmission systems (RLAN / Bluetooth) CISPR 32 (via EN 301 489 framework) — emissions limits reference	EN 301 489-17 duty-cycle-averaged emission limits and RLAN test modes are not present in GB/T 9254.1. Chinese test reports do not reference the EN 301 489 harmonised standards required for RED Art. 3.1(b) presumption of conformity. The DoC supporting CE marking must cite the EN 301 489 standards and be drafted in German for Austrian market documentation. Fresh testing to EN 301 489-1 + EN 301 489-17 at an ILAC MRA-member or EU-accredited laboratory is required; GB/T 9254.1 reports cannot be substituted.[INFORMATIONAL] RED Art. 3.1(b) EMC emissions compliance for Wi-Fi/Bluetooth devices in Austria requires EN 301 489-1 + EN 301 489-17 testing referenced in a German-language DoC. Chinese GB/T 9254.1 reports do not satisfy this pathway. RLAN-specific test modes in EN 301 489-17 require separate EU-accredited laboratory testing. RTR enforces RED compliance in Austria.	ETSI (European Telecommunications Standards Institute)2026-06-17 · reference
EMC Immunity — RED Art. 3.1(b) + EN 301 489-1 Immunity Levels (IEC 61000-4 Series)	In China, immunity requirements for information technology equipment are covered by GB/T 17618-2015 (Information technology equipment — Immunity characteristics — limits and methods of measurement, equivalent to CISPR 24:2010), administered by SAMR/SAC. Chinese immunity testing under GB/T 17618 is voluntary for non-CCC products. GB/T 17618 references similar IEC 61000-4 sub-tests but may specify different severity levels and test configurations compared with EN 301 489-1. Chinese GB/T 17618 immunity test reports do not constitute EU RED Art. 3.1(b) conformity evidence.GB/T 17618-2015 — Information technology equipment; immunity characteristics (equivalent to CISPR 24:2010) (SAMR/SAC)	In addition to emissions control, RED Art. 3.1(b) requires radio equipment to be protected against electromagnetic disturbances to ensure adequate immunity. EN 301 489-1 v2.2.3 specifies immunity requirements for radio equipment, referencing the IEC 61000-4 test series: IEC 61000-4-2 (electrostatic discharge, ESD), IEC 61000-4-3 (radiated immunity), IEC 61000-4-4 (electrical fast transient/burst), IEC 61000-4-5 (surge), IEC 61000-4-6 (conducted disturbances), IEC 61000-4-8 (power frequency magnetic field), and IEC 61000-4-11 (voltage dips and interruptions). Austria's industrial and residential environment corresponds to the EU harmonised immunity framework. Severity levels specified in EN 301 489-1 must be met; meeting only Chinese GB/T 17618 immunity levels is insufficient because severity levels and test configurations may differ from the EN 301 489-1 framework. Immunity testing must be referenced in the DoC in German and the test report must cite EN 301 489-1 v2.2.3.Directive 2014/53/EU (RED), Art. 3.1(b) — EMC immunity; enforced in Austria by RTR EN 301 489-1 v2.2.3 — Electromagnetic compatibility; common technical requirements; immunity framework IEC 61000-4-2 — Electrostatic discharge immunity IEC 61000-4-3 — Radiated electromagnetic field immunity IEC 61000-4-4 — Electrical fast transient / burst immunity IEC 61000-4-5 — Surge immunity IEC 61000-4-6 — Conducted disturbances immunity IEC 61000-4-11 — Voltage dips and short interruptions immunity	EN 301 489-1 immunity severity levels (e.g., ESD contact/air discharge levels, surge test voltage levels, conducted immunity test levels) may differ from GB/T 17618 configurations. EU RED conformity assessment requires the immunity test report to reference EN 301 489-1 v2.2.3, not the Chinese GB/T 17618 standard. The German-language DoC must cite EN 301 489-1 for immunity coverage. Re-testing at an EU-accredited or ILAC MRA-member laboratory to EN 301 489-1 immunity levels is required if Chinese reports are the only existing evidence.[INFORMATIONAL] RED Art. 3.1(b) immunity compliance for Wi-Fi/IoT devices in Austria requires EN 301 489-1 v2.2.3 testing with IEC 61000-4 series severity levels. Chinese GB/T 17618 immunity reports are not equivalent. A German-language DoC must cite EN 301 489-1 for immunity. EU-accredited laboratory re-testing is required where only Chinese reports exist. RTR is the Austrian enforcement authority.	ETSI (European Telecommunications Standards Institute)2026-06-17 · reference
EU Authorised Representative, Importer Obligations, WEEE (EAK Austria), RoHS	China has no direct equivalent to the EU AR obligation. Chinese manufacturers exporting to Austria independently bear all compliance responsibilities, or delegate to an Austrian importer who assumes legal obligations under Regulation (EU) 2019/1020. China does not have a WEEE take-back registration system equivalent to EAK Austria; the Chinese mandatory recycling fund (China RoHS fund contribution under the Administrative Measures on the Collection and Use of Waste Electrical and Electronic Products Treatment Fund, 2012) is a different mechanism and does not substitute for Austrian WEEE registration. China RoHS (MIIT Measures, 2016 / SJ/T 11364 labelling) differs in scope and substance limits from EU RoHS 2.China RoHS — Measures for Administration of the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products (MIIT, 2016) SJ/T 11364-2014 — Hazardous substance disclosure label (mandatory) Administrative Measures on the Collection and Use of Waste Electrical and Electronic Products Treatment Fund (State Council, 2012) — Chinese e-waste recycling fund (not equivalent to WEEE registration)	Non-EU manufacturers placing wireless/IoT devices on the Austrian market must appoint an EU Authorised Representative (EU AR) established within the EU before the first product enters the EU/Austrian market, under Regulation (EU) 2019/1020 Art. 4. The EU AR's name, address, and contact details must appear on the product or its packaging; this must be in German for Austrian market documentation. The EU AR holds the technical file and DoC on behalf of the manufacturer and is the contact point for RTR and Austrian market surveillance authorities. Importers (entities placing non-EU goods on the EU market) bear parallel obligations under Regulation (EU) 2019/1020 Arts. 5–6: they must verify CE marking, DoC, and technical file completeness before distribution. WEEE registration: Austrian law (Elektroaltgerätegesetz — EAG-VO 2005 / BGBl. II Nr. 121/2005 and subsequent amendments) transposing Directive 2012/19/EU requires producers to register with EAK Austria (Elektroaltgeräte Koordinierungsstelle Austria GmbH) and meet annual take-back and recycling targets. EAK Austria registration is separate from Germany's Stiftung EAR and must be maintained independently. RoHS 2 (Directive 2011/65/EU as amended by Directive 2015/863/EU) applies — ten substances restricted; conformity documented in the DoC. REACH Regulation (EC) No 1907/2006 substance restrictions apply in Austria as in all EU member states.Regulation (EU) 2019/1020, Art. 4 — EU Authorised Representative obligation for non-EU manufacturers Regulation (EU) 2019/1020, Arts. 5–6 — importer obligations (CE verification, DoC, technical file) Directive 2012/19/EU (WEEE) — waste electrical and electronic equipment; Austrian transposition: EAG-VO 2005 / BGBl. II Nr. 121/2005 (EAK Austria registration) Directive 2011/65/EU (RoHS 2) as amended by Directive 2015/863/EU — restriction of ten hazardous substances in EEE Regulation (EC) No 1907/2006 (REACH) — chemical substance restrictions across all EU member states including Austria	Four structural gaps: (1) EU AR — no Chinese equivalent; a Chinese manufacturer without an Austrian/EU importer must appoint an EU-established AR before first Austrian market placement; AR name and address must appear in German on the product or packaging; (2) EAK Austria WEEE registration — mandatory separate Austrian registration; not shared with Germany's Stiftung EAR even though both are German-language markets; annual take-back and recycling quota obligations apply; (3) EU RoHS 2 — ten restricted substances with EU-specific annexes and exemptions; differs from China RoHS in scope, substance concentration limits, and exemption lists; (4) REACH — EU-wide chemical substance restrictions apply in Austria; no Chinese equivalent framework of equal scope. German-language product documentation (including the AR's details on packaging) is an additional Austrian-specific obligation beyond the EU baseline.[INFORMATIONAL] An EU Authorised Representative is a hard legal gate for Chinese manufacturers placing wireless/IoT devices on the Austrian market without an EU importer. EAK Austria WEEE registration is a separate Austrian national obligation not shared with Germany's EAR — manufacturers active in both markets need two separate WEEE registrations. RoHS 2 and REACH are parallel mandatory obligations. German-language labelling of the AR on the product or packaging is an Austrian documentation requirement.	EUR-Lex / Official Journal of the European Union2026-06-17 · reference
Radio Equipment Directive — CE Marking, DoC, RTR, German Labelling, Schuko Type F	In China, market access for wireless/IoT devices requires SRRC Type Approval (NRA/MIIT) for radio transmitters, CCC (China Compulsory Certification) under CNCA-C17-01 for IT equipment or CNCA-C25-01 for telecom terminals, and China RoHS compliance with mandatory SJ/T 11364 hazardous substance disclosure labelling. MIIT NAL (Network Access Licence) may apply for devices connecting to public telecommunications networks. Chinese plugs use GB 2099.1 / GB 1002 standards (Type A/I, 220 V/50 Hz); plug type and voltage differ from Austria. Neither SRRC nor CCC is recognised in Austria or the EU.SRRC Type Approval — NRA/MIIT mandatory radio licence for wireless transmitters in China CCC — China Compulsory Certification (CNCA-C17-01 for IT equipment; CNCA-C25-01 for telecom terminals) China RoHS — Measures for Administration of the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products (MIIT, 2016) SJ/T 11364-2014 — Hazardous substance disclosure label (mandatory) GB 2099.1 / GB 1002 — Chinese plug and socket standards (Type A/I, 220 V/50 Hz)	Austria is an EU member state. Wireless and IoT devices placed on the Austrian market must comply with RED 2014/53/EU and bear CE marking. The national enforcement authority is RTR (Rundfunk und Telekom Regulierungs-GmbH), which monitors radio equipment compliance in Austria on behalf of BMAW (Federal Ministry for Labour and Economy). BEV (Bundesamt für Eich- und Vermessungswesen) and BMAW oversee metrology and standards transposition. CE marking, an EU Declaration of Conformity (DoC), and a technical file must be prepared; the DoC must be drafted in German (Deutsch) or be accompanied by a German translation for Austrian market placement. RoHS 2 (Directive 2011/65/EU) applies to restrict hazardous substances in EEE. Austria uses 230 V/50 Hz; mains-powered wireless devices must be designed for Type F (Schuko, CEE 7/4) grounded plugs — Type C (ungrounded Europlug) alone is not sufficient for Class I (earthed) devices. Austrian plug standards are governed by OVE EN 50075 and IEC 60083. Minimum CE marking height is 5 mm. WEEE registration is required with EAK Austria (Elektroaltgeräte Koordinierungsstelle Austria GmbH) — separate from Germany's EAR Stiftung register. REACH Regulation (EC) No 1907/2006 applies.Directive 2014/53/EU (RED) — Arts. 3.1(a), 3.1(b), 3.2, 3.3(d)(e)(f); enforced in Austria by RTR / BMAW Directive 2011/65/EU (RoHS 2) — restriction of hazardous substances in EEE Regulation (EC) No 1907/2006 (REACH) — chemical substance restrictions Directive 2012/19/EU (WEEE) — waste electrical and electronic equipment; Austrian transposition requires EAK Austria registration OVE EN 50075 / IEC 60083 — Austrian plug and socket standards (Type F Schuko CEE 7/4 for earthed Class I devices) Regulation (EU) 2019/1020, Art. 4 — EU Authorised Representative obligation for non-EU manufacturers	Structural gaps with no Chinese equivalent: (1) CE marking under RED — SRRC and CCC do not satisfy this; (2) German-language DoC and labelling — Austrian market placement requires German documentation; Chinese-only documentation is insufficient; (3) Type F (Schuko) plug — Chinese devices commonly use Type A or Type I plugs at 220 V; Austrian market requires Type F (CEE 7/4) Schuko at 230 V/50 Hz for Class I earthed devices; (4) EAK Austria WEEE registration — mandatory separate registration in Austria, not shared with Germany's EAR register; (5) EU Authorised Representative — mandatory for non-EU manufacturers without an EU importer under Regulation (EU) 2019/1020; (6) RTR notification — for radio equipment not covered by harmonised standards, RED Art. 16 notification to RTR applies; (7) REACH compliance — no direct Chinese equivalent for all EU-restricted substances and concentration limits.[INFORMATIONAL] CE marking under RED 2014/53/EU is mandatory for wireless/IoT devices entering Austria. RTR is the national enforcement authority. SRRC approval and CCC certification do not satisfy EU RED CE requirements. Austrian-specific obligations — German-language documentation, Type F (Schuko) plug compliance at 230 V/50 Hz, and WEEE registration with EAK Austria — add national-level obligations on top of EU baseline. Plan 3–6 months for full EU RED certification including testing, DoC in Deutsch, plug adaptation, and AR appointment.	RTR — Rundfunk und Telekom Regulierungs-GmbH (Austrian NRA)2026-06-17 · reference

INFORMATIONAL ONLY

Informational only / not a certification conclusion

AI-compiled, not human-verified. This comparison is generated and cross-checked by multiple AI models from public official sources; it has not been reviewed by a named human expert and may contain errors or out-of-date items. Confirm every requirement directly with the official regulator or standards body and a qualified professional before relying on it. Nothing here is legal, certification, customs, or market-access advice.

This page is an informational comparison aid, not a certification decision, legal opinion, notified-body assessment, customs determination, or market-access approval. Exporters, importers, and distributors should verify current Austrian and EU law, harmonised standards, and applicable national requirements with qualified professionals before shipment or market placement in Austria.

E-E-A-T

Named editorial review

Pending named reviewer

Official regulator, standards body, notified body, customs, or primary legal source preferred. Local PDFs are not accepted.

Editorial controls

Rows must include publisher, official URL, access date, verification flag, and last_verified before human_reviewed can be true.

SOURCES

Official-source register.

EUR-Lex / Official Journal of the European Union · accessed 2026-06-17 · reference · used in 1 rows
EUR-Lex / Official Journal of the European Union · accessed 2026-06-17 · reference · used in 1 rows
ETSI (European Telecommunications Standards Institute) · accessed 2026-06-17 · reference · used in 1 rows
ETSI (European Telecommunications Standards Institute) · accessed 2026-06-17 · reference · used in 1 rows
EUR-Lex / Official Journal of the European Union · accessed 2026-06-17 · reference · used in 1 rows
RTR — Rundfunk und Telekom Regulierungs-GmbH (Austrian NRA) · accessed 2026-06-17 · reference · used in 1 rows