CROSS-STANDARD public interest · Refrigerator / cold appliance
China-to-Zambia Household Refrigerator Compliance Gap Matrix
AI-compiled from official public sources — cross-checked by multiple AI models, not human-verified. Informational only; see disclaimer. Public-interest, source-linked comparison of Chinese household refrigerator compliance (CCC, GB 4706.13, GB 12021.2) against Zambia ZABS mandatory conformity assessment, import inspection, ZS/IEC 60335-2-24 safety, energy labelling/MEPS, R-600a refrigerant handling, ZICTA radio approval (for smart models), and in-country importer requirements.
Dataset 2026-06-11
Last verified 2026-06-15
7 rows
GAP MATRIX
Compliance Gap Matrix
| Compliance item | Common China baseline | Zambia (ZABS) | Gap / action | Source + verification date |
|---|---|---|---|---|
| EMC — Household Refrigerating Appliances (ZS/IEC CISPR 14 series under ZABS, ZICTA for radio modules) | China's EMC requirements for household appliances are governed by GB 4343.1-2018 (emission limits and measurement methods; mandatory, equivalent to CISPR 14-1:2016) and GB/T 4343.2-2020 (immunity; recommended, equivalent to CISPR 14-2:2015), with GB 17625.1-2022 (mandatory, IDT IEC 61000-3-2:2020) for harmonic emissions. These are enforced under the CCC regime by SAMR/CNCA. For wireless functions, China requires SRRC (State Radio Regulation of China) type approval of the radio module. Because both China and Zambia derive their appliance EMC standards from the same CISPR base, the technical content overlaps substantially; however, Chinese CCC/SRRC documentation does not automatically satisfy ZABS conformity assessment or ZICTA type approval.GB 4343.1-2018 — Emission limits and measurement methods for household appliances, electric tools and similar apparatus (mandatory; equivalent to CISPR 14-1:2016; enforced under CCC by SAMR/CNCA) GB/T 4343.2-2020 — Part 2: Immunity (recommended; equivalent to CISPR 14-2:2015) SRRC type approval — radio module approval for wireless functions (State Radio Regulation of China) |
Zambia does not operate an EU-style horizontal EMC Directive. For household appliances, electromagnetic compatibility is addressed through the Zambian Standard (ZS) adoption of the international CISPR/IEC EMC standards — primarily the ZS adoption of CISPR 14-1 (emission) and CISPR 14-2 (immunity) for household appliances, electric tools and similar apparatus — verified, where applicable, as part of ZABS conformity assessment for regulated electrical products. Separately, any refrigerator with wireless connectivity (Wi-Fi / Bluetooth smart-home module) requires type approval of the radio module by the Zambia Information and Communications Technology Authority (ZICTA) before importation and use; ZICTA governs the radio-spectrum and equipment-approval aspects, while ZABS governs the appliance-level safety/EMC conformity. There is no single CE-equivalent mark; ZABS verification plus, for connected models, ZICTA type approval are the applicable controls.ZS CISPR 14-1 — Electromagnetic compatibility — Requirements for household appliances, electric tools and similar apparatus — Part 1: Emission (Zambian adoption of CISPR 14-1) ZS CISPR 14-2 — Part 2: Immunity (Zambian adoption of CISPR 14-2) ZICTA type approval — radio equipment / connected modules (Information and Communication Technologies Act; required for Wi-Fi / Bluetooth smart models) ZABS conformity-assessment / import-inspection requirements for regulated electrical products |
Two distinct paths must be addressed: (1) Appliance EMC — because the Zambian ZS standard and Chinese GB 4343.1 both derive from CISPR 14, the underlying emission/immunity test data has high technical overlap; the practical gap is presenting acceptable evidence (an IEC/CISPR-based CB or accredited-lab report is preferable to a CCC certificate referencing GB) as part of ZABS conformity assessment. (2) Radio module — for smart/connected refrigerators, Chinese SRRC approval does NOT carry over; the Wi-Fi/Bluetooth module must obtain ZICTA type approval before importation. For a standard (non-connected) refrigerator, only the appliance-level EMC via ZABS applies and there is no ZICTA step. Markings/documentation should be in English. Zambia has no EU-style standalone EMC mark; conformity is demonstrated through ZABS verification (and ZICTA approval for radio).[INFORMATIONAL] Zambia has no EU-style horizontal EMC Directive; appliance EMC is handled through ZS/CISPR 14 standards under ZABS conformity assessment, and connected models additionally need ZICTA type approval of the radio module. Chinese GB 4343.1 (CISPR-derived) test data overlaps technically but is not automatically accepted; an IEC/CISPR-based accredited report is preferable. SRRC approval does not substitute for ZICTA. Confirm current ZABS and ZICTA requirements with a qualified consultant. | Zambia Information and Communications Technology Authority (ZICTA)2026-06-15 · reference |
| Energy Performance / MEPS — Household Refrigerating Appliances (Zambia energy-efficiency programme; ZS/IEC 62552) | China's mandatory energy-efficiency standard for household refrigerators is GB 12021.2-2015 (Minimum allowable values of energy efficiency and energy efficiency grades for household refrigerators), establishing grades (Grade 1 most efficient to Grade 5 minimum threshold) and minimum annual energy-consumption limits, with GB/T 8059-2016 as the aligned test-method standard (IEC 62552 series). The standard is mandatory (GB), enforced by SAMR, with the China Energy Label administered by NDRC. Because both China's test method (GB/T 8059 / IEC 62552) and Zambia's adopted method (ZS/IEC 62552) derive from IEC 62552, the underlying consumption measurement overlaps; however, the MEPS threshold and any Zambian label format differ from China's grade system and are not directly comparable.GB 12021.2-2015 — Minimum allowable values of energy efficiency and energy efficiency grades for household refrigerators (mandatory; enforced by SAMR/NDRC under China Energy Label system) GB/T 8059-2016 — Household and similar refrigerating appliances (test method, aligned with IEC 62552 series) |
Zambia has been advancing energy-efficiency programmes covering electrical appliances (including refrigerators), driven by national energy policy and supported by regional Southern African (SADC) harmonisation and international cooperation on minimum energy performance standards (MEPS) and energy labelling. Where MEPS apply, household refrigerating appliances must meet a minimum energy-performance threshold and their energy consumption is measured against the Zambian Standard adoption of the international test method (ZS / IEC 62552 series — characteristics and test methods for household refrigerating appliances). The energy-performance dimension is assessed alongside ZABS conformity assessment for regulated products. Exporters should confirm the precise scope, in-force dates, MEPS levels, and any labelling format with ZABS and the relevant Zambian energy authority before relying on a specific threshold, as the programme is evolving. [Confirm current MEPS coverage and label format for refrigerators with ZABS before market placement.]ZS IEC 62552 series — Household refrigerating appliances — Characteristics and test methods (Zambian adoption of IEC 62552 for energy measurement) Zambia national energy-efficiency programme / MEPS for electrical appliances (advanced with SADC regional harmonisation and international cooperation) ZABS conformity-assessment / import-inspection framework (energy performance assessed for regulated products) |
The measurement basis overlaps because both countries adopt IEC 62552, but two gaps remain: (1) MEPS threshold — a Chinese Grade 1 or Grade 2 rating does not by itself prove the unit meets the Zambian MEPS threshold; the consumption value must be evaluated against the Zambian MEPS level in force, which must be confirmed with ZABS as the programme is evolving; (2) Label/declaration — China's 1-to-5 grade China Energy Label does not serve as the Zambian energy declaration; if Zambia requires a specific energy label or declaration for refrigerators, it must be produced in the Zambian format (in English) using IEC 62552-based data. Test data measured to GB/T 8059 / IEC 62552 can support the Zambian filing, but the threshold comparison and any label conversion are the manufacturer's responsibility. [The exact MEPS level and whether comparative labelling is mandatory for refrigerators should be confirmed with ZABS before relying on Chinese grade data.][INFORMATIONAL] Zambia's appliance energy-efficiency / MEPS programme uses IEC 62552-based measurement, the same test basis as China's GB/T 8059, so consumption data is reusable; however, a Chinese energy grade does not prove compliance with the Zambian MEPS threshold, and the China Energy Label is not a Zambian energy declaration. Confirm the current MEPS level and any label format with ZABS before market placement. | Zambia Bureau of Standards (ZABS)2026-06-15 · reference |
| Energy Labelling — Zambian Energy Label / Declaration (vs China Energy Label) | China's energy labelling for household refrigerators is the China Energy Label (CEL) under the Measures for the Administration of Energy Efficiency Labels (NDRC/SAMR, 2016 revision), displaying a 1-to-5 grade (1 highest, 5 minimum threshold) and annual energy consumption, administered by CNIS under NDRC/SAMR. Manufacturers self-declare the grade based on GB 12021.2 testing; there is no EPREL-style pre-registration database. The Chinese 1-to-5 grade label is structurally different from any Zambian comparative label and cannot serve as the Zambian energy declaration without conversion.Measures for the Administration of Energy Efficiency Labels (NDRC/SAMR 2016 revision) — China Energy Label framework GB 12021.2-2015 — Minimum allowable values of energy efficiency and energy efficiency grades for household refrigerators (underlying grade standard) |
As part of Zambia's appliance energy-efficiency programme, comparative energy labelling for major appliances (including refrigerators) is being developed and rolled out, supported by SADC regional harmonisation of appliance labels and international cooperation. Where an energy label is required, the supplier/importer must display the Zambian energy label showing the energy-performance class and measured annual energy consumption (kWh/annum), based on testing to the ZS adoption of the IEC 62552 series. The label must be presented in English at point of sale. Unlike the EU there is no EPREL-style mandatory central product-registration database that gates market entry; conformity is demonstrated through ZABS conformity assessment and, where applicable, the energy label/declaration. Exporters should confirm with ZABS whether comparative labelling is currently mandatory for refrigerators and the exact label artwork/scale required. [Confirm label mandatory status, scale, and format with ZABS before market placement.]Zambia comparative energy-labelling programme for major appliances (developed with SADC harmonisation; in-force scope for refrigerators to be confirmed with ZABS) ZS IEC 62552 series — measurement basis for declared annual energy consumption ZABS conformity-assessment framework (energy label/declaration assessed for regulated products) |
The China Energy Label cannot be reused directly: (1) Format/scale — if Zambia mandates a comparative energy label for refrigerators, it must follow the Zambian (or SADC-harmonised) format and scale, in English, not China's 1-to-5 grade artwork; (2) Underlying data — the declared annual energy consumption can be derived from existing IEC 62552-based test data (shared basis with GB/T 8059), so re-testing for the energy figure may be avoidable, but the class assignment must use the Zambian scale; (3) No central registration gate — unlike the EU EPREL, Zambia has no mandatory central pre-registration database that blocks market entry; the relevant gate is ZABS conformity assessment plus, where applicable, the label/declaration. The exact mandatory status of comparative labelling for refrigerators in Zambia is evolving and must be confirmed with ZABS. Where Zambia lacks a defined comparative-label scheme for a given product, plainly: no EU-style energy-label artwork is required, only the MEPS threshold and any declaration ZABS specifies.[INFORMATIONAL] Where Zambia requires a comparative energy label for refrigerators, it must use the Zambian/SADC-harmonised format in English, not the Chinese 1-to-5 China Energy Label; the declared consumption can reuse IEC 62552-based test data. Unlike the EU, there is no EPREL-style central registration gating market entry — the gate is ZABS conformity assessment. Confirm the current label mandatory status and format with ZABS before market placement. | Zambia Bureau of Standards (ZABS)2026-06-15 · reference |
| ZABS Mandatory Conformity Assessment + Import Inspection + ZABS Mark | In China, household refrigerating appliances require China Compulsory Certification (CCC) covering safety (GB 4706.13) and EMC (GB 4343.1) before domestic sale, administered as third-party certification by CNCA-designated bodies, plus the China Energy Label (GB 12021.2) administered by NDRC/SAMR. CCC is a domestic-market scheme: the CCC mark and certificate apply only to the Chinese market and are not accepted by ZABS as evidence of conformity to Zambian Standards, even though the underlying GB standards derive from the same IEC base. The exporter/importer must obtain Zambia-facing evidence (preferably IEC-based CB reports) and clear ZABS conformity assessment independently.CCC (China Compulsory Certification) — safety (GB 4706.13) + EMC (GB 4343.1); mandatory domestic scheme; administered by CNCA/SAMR China Energy Label — Measures for the Administration of Energy Efficiency Labels (NDRC/SAMR); based on GB 12021.2-2015 |
Household refrigerating appliances imported into Zambia fall under the Zambia Bureau of Standards (ZABS) mandatory conformity-assessment and import-inspection regime for regulated products. Before customs release, the consignment must demonstrate conformity with the applicable Zambian Standards (ZS, which adopt IEC standards) — for refrigerators, the ZS adoptions of IEC 60335-2-24 (safety), CISPR 14 (EMC), and IEC 62552 (energy) as applicable. Conformity is typically evidenced through test reports/certificates (IECEE CB Scheme reports are well-suited because ZS adopts IEC) and verified by ZABS, which may inspect goods at the port/border and at destination. For regulated products, the ZABS mark applies, signifying that the product has been assessed against Zambian requirements. There is no single CE-equivalent self-declaration route: ZABS verification is a third-party / authority-led step that must be cleared before the goods can legally be sold.Standards Act (Zambia) — ZABS conformity assessment, import inspection, and ZABS mark for regulated products ZS IEC 60335-2-24 (safety) / ZS CISPR 14 (EMC) / ZS IEC 62552 (energy) — applicable Zambian Standards adopting IEC for refrigerators IECEE CB Scheme — internationally recognised IEC test reports/certificates accepted as a strong basis for ZABS conformity assessment |
Chinese manufacturers/importers must build a Zambia-facing conformity package: (1) Test evidence — preferably an IECEE CB Scheme report/certificate to IEC 60335-2-24 (and CISPR 14 / IEC 62552 as applicable); because ZS adopts IEC, IEC-based reports are accepted far more readily than CCC certificates citing GB national deviations; (2) ZABS conformity assessment / product certification — application to ZABS for assessment against the applicable ZS, leading to authorisation to apply the ZABS mark for regulated products; (3) Import inspection — the consignment is subject to ZABS verification at the border/port and may be inspected at destination before release; (4) English documentation — instructions, markings, and the nameplate (rated 230 V, 50 Hz) in English. CCC and the China Energy Label do not substitute for any of these steps. Practical advantage: the IEC heritage shared by GB and ZS standards means existing CB-route test data can usually be re-used, so the gap is largely procedural (Zambian certification + inspection) rather than re-engineering.[INFORMATIONAL] ZABS conformity assessment and import inspection are mandatory gates for household refrigerators entering Zambia, with the ZABS mark applying to regulated products. Chinese CCC and the China Energy Label are domestic schemes and are not accepted by ZABS. Because Zambian ZS standards adopt IEC, an IECEE CB Scheme report to IEC 60335-2-24 (and CISPR 14 / IEC 62552) is the most efficient evidence — the gap is largely procedural. Confirm current ZABS requirements with a qualified consultant. | Zambia Bureau of Standards (ZABS)2026-06-15 · reference |
| In-Country Importer / Representative + Customs & Landlocked Logistics (ZRA; Dar es Salaam / Durban routing) | China has no direct regulatory equivalent obliging an export manufacturer to appoint a foreign-country resident responsible representative for product compliance. Chinese exporters typically engage overseas distributors or trading companies commercially, without a statutory foreign-representative obligation. Under the domestic CCC regime, the certificate holder is responsible only for Chinese-market compliance; that role does not extend to or satisfy Zambian customs/conformity requirements, which require a Zambia-based importer/representative.N/A — no direct Chinese regulatory equivalent obliging appointment of a Zambia-based importer/representative | To place refrigerators on the Zambian market, the goods must be brought in by a locally registered importer/representative who handles customs clearance with the Zambia Revenue Authority (ZRA) and interfaces with ZABS for conformity verification and import inspection. The in-country importer is the responsible party for presenting conformity evidence, paying duties/taxes, and holding documentation. Zambia is landlocked, so refrigerators manufactured in China are shipped to a maritime gateway port — typically Dar es Salaam (Tanzania) or Durban (South Africa) — and then moved overland by road/rail into Zambia, with transit and any pre-shipment/destination inspection arrangements factored into lead time and cost. Customs documentation (commercial invoice, packing list, bill of lading, certificate of origin, and ZABS conformity evidence) must be in order for release.Zambia Revenue Authority (ZRA) — customs clearance, duties and taxes for imported goods ZABS import inspection / conformity verification at border or destination (coordinated with the registered importer) Landlocked routing — maritime entry via Dar es Salaam (Tanzania) or Durban (South Africa), then overland road/rail transit into Zambia |
This is a structural gap with no Chinese regulatory analogue: (1) Importer of record — a Zambia-registered importer/representative must be in place to clear customs with ZRA and present ZABS conformity evidence; a Chinese exporter cannot place goods on the Zambian market without this local party; (2) Logistics/lead time — because Zambia is landlocked, plan for sea freight to Dar es Salaam or Durban plus overland transit, and account for any pre-shipment or destination inspection in the schedule; (3) Documentation set — commercial invoice, packing list, bill of lading, certificate of origin, and the ZABS conformity package must travel with the consignment; (4) Duties/taxes — payable through the importer to ZRA. Note Zambia is not, like the EU, a single horizontal market with an Authorised-Representative statute; the practical equivalent is the registered local importer who carries customs and conformity responsibility. Confirm the current importer-registration and inspection procedure with ZABS/ZRA.[INFORMATIONAL] A Zambia-registered importer/representative is required in practice to clear customs with ZRA and present ZABS conformity evidence; a Chinese exporter cannot place refrigerators on the Zambian market without this local party. As Zambia is landlocked, plan logistics via Dar es Salaam or Durban plus overland transit. There is no EU-style Authorised-Representative statute; the registered importer carries the responsibility. Confirm current ZRA/ZABS procedures with a qualified consultant. | Zambia Revenue Authority (ZRA)2026-06-15 · reference |
| Refrigerant — R-600a Flammable Refrigerant Handling (ZS/IEC 60335-2-24 Annex AA; Kigali / Montreal Protocol) | China addresses flammable-refrigerant safety for household appliances primarily through GB 4706.13-2014, which incorporates R-600a flammability provisions derived from IEC 60335-2-24, with GB 9237 (refrigerating-system safety, aligned with ISO 5149) at system level. China is a party to the Montreal Protocol and ratified the Kigali Amendment in June 2021, operating its HFC phase-down schedule through the Ministry of Ecology and Environment (MEE). Chinese household refrigerators have largely transitioned to R-600a. Chinese appliance manufacturers exporting R-600a units to Zambia are generally well-positioned on the refrigerant dimension, but charge amounts and documentation must be verified against the Zambian ZS/IEC 60335-2-24 Annex AA basis.GB 4706.13-2014 — flammable refrigerant (R-600a) requirements for household refrigerating appliances (derived from IEC 60335-2-24) GB 9237 — Safety requirements for refrigerating systems and heat pumps (aligned with ISO 5149) Montreal Protocol + Kigali Amendment — China HFC phase-down schedule (Kigali ratified June 2021, administered by MEE) |
Zambia does not operate an EU-style standalone F-Gas Regulation. Refrigerant control for household refrigerators rests on two pillars: (1) appliance-level flammable-refrigerant safety, addressed through the Zambian Standard adoption of IEC 60335-2-24 Annex AA (maximum R-600a / isobutane charge per compartment configuration, ventilation, and ignition-source requirements), verified within ZABS conformity assessment; and (2) ozone-depleting-substance and HFC phase-down obligations under the Montreal Protocol and its Kigali Amendment, to which Zambia is a party — administered nationally through the Zambia Environmental Management Agency (ZEMA) and the relevant ozone/climate focal point, with import licensing of controlled substances. R-600a (isobutane, GWP about 3, ISO 817 class A3) is a hydrocarbon, not an HFC, so it is not subject to HFC phase-down quotas; manufacturers must, however, document the refrigerant designation and charge weight (grams) and verify charge against IEC 60335-2-24 Annex AA limits.ZS IEC 60335-2-24 — Annex AA: Requirements for appliances using flammable refrigerants (R-600a charge limits, ventilation, ignition source requirements; Zambian adoption of IEC 60335-2-24) Montreal Protocol on Substances that Deplete the Ozone Layer + Kigali Amendment (HFC phase-down) — Zambia is a party; administered via ZEMA / national ozone focal point with import licensing of controlled substances ISO 817 — Refrigerants — Designation and safety classification (R-600a classified A3: lower flammability) |
For R-600a appliances the gap is documentation and charge verification rather than a fundamental technology gap: (1) product documentation for Zambia must state the refrigerant designation (R-600a / isobutane), charge weight in grams, and the safety precautions per IEC 60335-2-24 Annex AA, in English; (2) the R-600a charge must be verified against IEC 60335-2-24 Annex AA maximum limits (a function of compartment configuration), and Chinese CCC test reports may not explicitly confirm Zambian-accepted charge-limit compliance if tested under slightly different configurations; (3) if any model in the export range still uses an HFC (e.g., R-134a), the importer should confirm the unit does not require an HFC import licence/quota allocation under Zambia's Kigali/Montreal implementation administered by ZEMA. Zambia has no EU 2024/573-style product-level HFC prohibition schedule for household refrigerators, but controlled-substance import licensing may apply. [Confirm the current ZEMA import-licensing position for any HFC-charged units before shipment.][INFORMATIONAL] R-600a is well-positioned for Zambia: it is a low-GWP hydrocarbon not subject to HFC phase-down quotas, and its safety is governed by ZS/IEC 60335-2-24 Annex AA within ZABS conformity assessment. Manufacturers must document refrigerant type and charge weight and verify charge against Annex AA limits. Any HFC-charged models should be checked against ZEMA import-licensing under Zambia's Montreal/Kigali implementation. Confirm current requirements with a qualified consultant. | Zambia Environmental Management Agency (ZEMA)2026-06-15 · reference |
| Electrical Safety — Household Refrigerating Appliances (ZS/IEC 60335-2-24 under ZABS conformity assessment) | China's mandatory safety standard for household refrigerating appliances is GB 4706.13-2014 (Safety of household and similar electrical appliances — Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers), technically derived from IEC 60335-2-24:2010 with Chinese national deviations. GB 4706.13-2014 is mandatory (GB) and enforced by SAMR under the China Compulsory Certification (CCC) regime; products must be CCC-certified by a CNCA-designated body before sale in China. A Chinese CCC certificate to GB 4706.13 is not automatically accepted by ZABS; however, because both GB 4706.13 and the Zambian ZS standard derive from the same IEC 60335-2-24 base, the underlying test data has high technical overlap.GB 4706.13-2014 — Safety of household and similar electrical appliances — Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers (mandatory; derived from IEC 60335-2-24:2010 with national deviations; enforced under CCC by SAMR/CNCA) GB 4706.1-2005 — General requirements (read in conjunction with GB 4706.13) |
Household refrigerating appliances imported into Zambia must meet the applicable Zambian Standard (ZS) for safety of refrigerating appliances. Zambia, through the Zambia Bureau of Standards (ZABS), adopts International (IEC) standards as national ZS standards; the relevant safety standard is the ZS adoption of IEC 60335-2-24 (Safety of household and similar electrical appliances — Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers), read with IEC 60335-1 (general requirements). Key requirements cover protection against electric shock, insulation resistance and dielectric strength, thermal cut-outs, creepage and clearance distances, mechanical strength of the housing, earthing continuity, and appliance markings. Because Zambia adopts IEC standards, an IECEE CB Scheme test report issued against IEC 60335-2-24 is a strong basis for ZABS conformity assessment. The appliance must be rated for the Zambian supply of 230 V, 50 Hz.ZS IEC 60335-2-24 — Safety of household and similar electrical appliances — Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers (Zambian adoption of IEC 60335-2-24) ZS IEC 60335-1 — General requirements (read in conjunction with Part 2-24) Standards Act and ZABS conformity-assessment / import-inspection requirements (Zambia Bureau of Standards) |
Because the Zambian ZS standard adopts IEC 60335-2-24 directly while GB 4706.13 is IEC 60335-2-24 with Chinese national deviations, the practical gap is mainly in acceptance and documentation rather than fundamental design: (1) Conformity-assessment route — the manufacturer or importer should present an IECEE CB Scheme test report and certificate to IEC 60335-2-24 (plus IEC 60335-1) to ZABS, which is more readily accepted than a CCC certificate referencing GB national deviations; (2) Rating verification — the appliance must be rated for 230 V, 50 Hz; products built only for China's 220 V nominal should be checked for compatibility (frequency is identical at 50 Hz, so motor/compressor behaviour is unaffected, but nameplate and tolerance ratings must cover 230 V); (3) Markings and instructions must be in English (Zambia's official language) and meet IEC marking requirements; (4) ZABS import inspection / conformity assessment must be cleared before customs release. No EU-style Notified Body is involved, but ZABS verification is mandatory for regulated electrical products.[INFORMATIONAL] Electrical-safety conformity to the Zambian ZS adoption of IEC 60335-2-24, verified through ZABS conformity assessment, is required before household refrigerators enter the Zambian market. Chinese CCC certification to GB 4706.13 is not automatically accepted, but an IECEE CB Scheme report to IEC 60335-2-24 (plus IEC 60335-1) is the most direct evidence for ZABS because Zambian standards adopt IEC. Verify the appliance is rated for 230 V, 50 Hz. Confirm current ZABS requirements with a qualified consultant. | Zambia Bureau of Standards (ZABS)2026-06-15 · reference |
E-E-A-T
Named editorial review
Pending named reviewer
Official regulator, standards body, notified body, customs, or primary legal source preferred. Local PDFs are not accepted.
Editorial controlsRows must include publisher, official URL, access date, verification flag, and last_verified before human_reviewed can be true.
SOURCES
Official-source register.
- Zambia Information and Communications Technology Authority (ZICTA) · accessed 2026-06-15 · reference · used in 1 rows
- Zambia Bureau of Standards (ZABS) · accessed 2026-06-15 · reference · used in 4 rows
- Zambia Revenue Authority (ZRA) · accessed 2026-06-15 · reference · used in 1 rows
- Zambia Environmental Management Agency (ZEMA) · accessed 2026-06-15 · reference · used in 1 rows