CROSS-STANDARD public interest · LED luminaire
China-to-Laos LED Luminaire Compliance Gap Matrix
AI-compiled from official public sources — cross-checked by multiple AI models, not human-verified. Informational only; see disclaimer. Public-interest, source-linked comparison of common China LED luminaire documentation against Laos DOSM mandatory conformity certification, MEM energy programme requirements, EDL grid specifications, and IEC-based technical standards versus Chinese GB standards and CCC certification. Laos has no horizontal RoHS law; hazardous-substance status is mapped honestly as absent where applicable.
Dataset 2026-06-11
Last verified 2026-06-16
11 rows
GAP MATRIX
Compliance Gap Matrix
| Compliance item | Common China baseline | Laos (DOSM / MEM / EDL) | Gap / action | Source + verification date |
|---|---|---|---|---|
| Energy Efficiency — MEM Energy Programme for LED Lighting | China's energy efficiency regime for LED lighting is governed by GB 30255 (Energy efficiency limits and energy efficiency grades for self-ballasted LED lamps for general lighting) and associated MEPS under SAMR and MIIT. CCC covers safety; energy label requirements under China's energy labelling system are separate. China's energy efficiency standards and test methods (LM-80 / LM-79 aligned) are technically comparable to IEC 62560 baselines. Chinese GB 30255 energy data may serve as supporting documentation for MEM applications but must be mapped to Laos-specific programme thresholds.GB 30255 — Energy efficiency limits and energy efficiency grades for self-ballasted LED lamps for general lighting (SAC/SAMR) China energy labelling system for lighting products (MIIT) |
The Ministry of Energy and Mines (MEM) of Laos administers energy policy and energy efficiency programmes. MEM has promoted energy-efficient lighting adoption as part of national energy programmes, aligned with ASEAN energy efficiency frameworks. LED luminaires and lamps may be subject to minimum energy performance standards (MEPS) or voluntary energy efficiency labelling under MEM schemes. IEC 62560 (Self-ballasted LED-lamps for general lighting services — Performance requirements) and IEC 60598-1 provide the technical baselines. Specific MEM MEPS thresholds and labelling obligations for LED luminaires should be confirmed directly with MEM, as programme scope and enforcement status continue to evolve.MEM (Ministry of Energy and Mines, Lao PDR) energy efficiency programmes for lighting IEC 62560 — Self-ballasted LED-lamps for general lighting services — Performance requirements ASEAN energy efficiency frameworks for lighting products |
Key gaps: (1) MEM programme thresholds (lm/W, CRI, lifetime) may differ from China GB 30255 values — verify current MEM MEPS before product selection or modification. (2) China energy label format and EPREL-style database registration are not required in Laos; MEM may have its own labelling or registration process. (3) Voltage difference (220 V CN vs 230 V Laos) affects lm/W efficacy measurements — photometric data at 230 V is needed for Laos submissions. (4) MEM programme enforcement level and mandatory vs. voluntary status should be confirmed directly with MEM.[INFORMATIONAL] MEM energy programmes set energy efficiency baselines for LED lighting in Laos under ASEAN frameworks. Chinese GB 30255 data may partially support MEM applications but thresholds and test voltage (230 V) must be verified. China energy label format is not required in Laos. Confirm current MEM MEPS thresholds, mandatory vs. voluntary status, and any labelling obligations directly with MEM before market entry. | MEM — Ministry of Energy and Mines, Lao PDR2026-06-16 · reference |
| Grid Compatibility and EDL Requirements (230 V / 50 Hz) | China's grid operates at 220 V nominal, 50 Hz (three-phase 380 V). Chinese LED products are typically designed and rated for 220 V input. Products with 220-240 V wide-range input ratings are common in export-oriented manufacturing and satisfy both Chinese and Laos nominal voltages within IEC 60038 tolerance bands. No separate Chinese equivalent to EDL — the State Grid Corporation (SGCC) and China Southern Power Grid govern grid standards in China.China grid specification: 220 V nominal, 50 Hz (SGCC / CSG) GB/T 156 — Standard voltages (Chinese equivalent to IEC 60038) |
Electricite du Laos (EDL) is the national power utility supplying the Laos grid at 230 V nominal, 50 Hz single-phase (three-phase at 400 V). LED luminaires and drivers must be designed, rated, and tested for 230 V operation. Although China and Laos share the same 50 Hz frequency, Laos nominal voltage of 230 V differs from China's 220 V. Products intended for both markets must carry 220-240 V input ratings or be separately rated. EDL does not impose specific product certification requirements beyond normal grid-tied electrical safety; DOSM conformity certification covers electrical safety. Voltage tolerance bands should be verified to IEC 60038 guidance.EDL (Electricite du Laos) grid specification: 230 V nominal, 50 Hz IEC 60038 — IEC standard voltages (reference for voltage tolerance bands) DOSM (Laos) conformity certification covering electrical safety for grid-connected products |
Key gap: nominal voltage is 230 V in Laos vs 220 V in China. Products rated only for 220 V must be re-rated or re-engineered for 230 V. Products with a 220-240 V wide-range input cover both markets. Photometric (lm/W) measurements and thermal tests performed at 220 V may not reflect actual performance at 230 V — re-testing at 230 V is recommended for Laos market submissions. No frequency gap (50 Hz both markets). EDL does not impose additional product certification beyond DOSM electrical safety conformity.[INFORMATIONAL] Laos operates at 230 V / 50 Hz (EDL). Chinese LED products rated for 220 V must be re-rated or verified for 230 V. Wide-range 220-240 V input products cover both markets. Re-testing at 230 V for photometric and thermal data is recommended for Laos submissions. No additional product certification from EDL beyond DOSM electrical safety conformity. | EDL — Electricite du Laos2026-06-16 · reference |
| EMC — Conducted and Radiated Emissions (IEC 55015 / CISPR 15 under DOSM) | China's applicable EMC standard for lighting equipment is GB 17743 (Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment), which is technically aligned with CISPR 15. EMC testing under GB 17743 is typically required alongside CCC safety testing. Chinese GB 17743 test data may serve as supporting evidence for a Laos DOSM application but does not substitute for DOSM conformity certification.GB 17743 — Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (SAC/SAMR, aligned with CISPR 15) | Laos adopts IEC/CISPR-based EMC standards under ASEAN harmonisation frameworks. CISPR 15 (Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment) is the applicable baseline for LED luminaire conducted and radiated emission limits. DOSM conformity certification for regulated electrical goods may encompass EMC requirements. Products must meet EMC requirements as part of the overall DOSM conformity process. The exact emission limits and test methods applicable under Laos DOSM should be confirmed directly with DOSM, as the regulatory framework is still developing.CISPR 15 — Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (IEC/CISPR, adopted under ASEAN frameworks) DOSM (Laos) conformity certification scope for regulated electrical goods |
GB 17743 and CISPR 15 are technically well-aligned so emissions test data may overlap significantly; however, a Laos DOSM-accepted test report may need to be issued by an accredited laboratory recognised by DOSM. Confirm whether a CNAS or ILAC MRA-recognised lab report is accepted. Chinese CCC EMC evidence does not automatically satisfy Laos DOSM. No frequency gap (both 50 Hz); voltage difference (220 V CN vs 230 V Laos) affects conducted emission test configuration — retesting at 230 V may be required.[INFORMATIONAL] CISPR 15-based EMC requirements apply to LED luminaires in Laos under DOSM conformity. GB 17743 and CISPR 15 are technically well-aligned, but Chinese CCC EMC evidence does not substitute for Laos DOSM conformity. Retesting at 230 V may be required. Confirm DOSM-accepted laboratory accreditation before commissioning tests. | DOSM — Department of Standards and Metrology, Lao PDR2026-06-16 · reference |
| EMC — Immunity (IEC 61547 under DOSM / ASEAN Frameworks) | China's equivalent immunity standard for lighting is GB/T 18595 (General requirements on immunity for equipment for use in power installations of buildings), aligned with IEC 61547. Immunity testing under GB/T 18595 may be conducted alongside CCC testing. Chinese immunity test evidence to GB/T 18595 may support a Laos DOSM application as supplementary documentation but does not substitute for DOSM conformity certification.GB/T 18595 — General requirements on immunity for equipment for use in power installations of buildings (SAC/SAMR, aligned with IEC 61547) | IEC 61547 (Equipment for general lighting purposes — EMC immunity requirements) is the IEC baseline for electromagnetic immunity of LED lighting equipment, adopted under ASEAN harmonisation frameworks. Laos DOSM conformity for regulated lighting equipment may encompass immunity testing to IEC 61547. Requirements cover immunity to electrostatic discharge (ESD), radiated RF fields, electrical fast transients (EFT), surges, and conducted RF disturbances at levels appropriate for residential/commercial environments. Confirm the precise immunity scope included in DOSM conformity requirements directly with DOSM.IEC 61547 — Equipment for general lighting purposes — EMC immunity requirements (IEC, adopted under ASEAN frameworks) DOSM (Laos) conformity certification scope for regulated lighting equipment |
GB/T 18595 and IEC 61547 are technically aligned; existing Chinese immunity test data may be largely reusable in a DOSM submission as supporting evidence. The 230 V vs 220 V voltage difference may require surge and EFT immunity testing to be repeated at 230 V input. Confirm whether DOSM requires immunity testing at all and which laboratory accreditation it accepts. Chinese CCC immunity evidence does not automatically satisfy Laos DOSM requirements.[INFORMATIONAL] IEC 61547 immunity requirements apply to LED luminaires in Laos under ASEAN frameworks and DOSM conformity. GB/T 18595 and IEC 61547 are well-aligned; existing Chinese immunity data may partially support a DOSM submission. Voltage difference (230 V vs 220 V) may require retesting at input supply. Confirm DOSM immunity scope and accepted laboratory accreditation before shipment. | DOSM — Department of Standards and Metrology, Lao PDR2026-06-16 · reference |
| Photobiological Safety — Blue Light Hazard (IEC 62471 under DOSM / Buyer Requirement) | China's equivalent photobiological safety standard is GB/T 20145 (Photobiological safety of lamps and lamp systems), which is technically aligned with IEC 62471. GB/T 20145 risk group classification and test data are largely comparable to IEC 62471. Chinese photobiological safety test reports under GB/T 20145 may be accepted as supporting documentation in Laos where IEC 62471 evidence is requested, given the technical alignment. CCC does not formally cover photobiological safety as a mandatory element.GB/T 20145 — Photobiological safety of lamps and lamp systems (SAC/SAMR, aligned with IEC 62471) | IEC 62471 (Photobiological safety of lamps and lamp systems) is the international standard for assessing blue light hazard, retinal thermal hazard, and UV hazard of light sources including LED luminaires. Laos does not have a domestic photobiological safety regulation specific to LED luminaires, but IEC 62471 is recognised under ASEAN frameworks and may be requested by DOSM as supporting documentation for regulated lighting products or by commercial buyers and distributors. Risk group classification (RG0 Exempt, RG1 Low, RG2 Moderate, RG3 High) must be declared on product or packaging where required. Compliance with IEC 62471 is considered good practice for LED luminaires sold in Laos.IEC 62471 — Photobiological safety of lamps and lamp systems (IEC, recognised under ASEAN frameworks) IEC TR 62778 — Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires |
Laos has no mandatory photobiological safety regulation for LED luminaires — IEC 62471 is a good-practice and buyer-driven requirement rather than a statutory obligation as of the verified date. Key practical gaps: (1) Chinese GB/T 20145 test data is technically equivalent to IEC 62471 and generally reusable; (2) risk group labelling on product/packaging is recommended even where not mandated; (3) confirm with DOSM or buyers whether a specific IEC 62471 test report from an ILAC MRA-recognised lab is required for market entry. No gap due to voltage difference for photobiological testing (optical output, not electrical supply dependent).[INFORMATIONAL] Laos has no mandatory photobiological safety law for LED luminaires as of the verified date. IEC 62471 risk group classification is recommended good practice and may be required by DOSM or commercial buyers. Chinese GB/T 20145 test data is technically equivalent to IEC 62471 and generally reusable. Risk group labelling on packaging is advisable regardless of legal obligation. | IEC — International Electrotechnical Commission2026-06-16 · reference |
| UV and Thermal Radiation Hazard (IEC 62471 — Additional Hazard Groups) | GB/T 20145 covers UV, visible, and infrared hazard assessment for lamps, technically aligned with IEC 62471 full scope. Chinese manufacturers performing GB/T 20145 testing for the domestic or export market will have UV and IR hazard group data that is directly comparable to IEC 62471 classifications and reusable for Laos market documentation. CCC does not mandate GB/T 20145 UV/IR testing.GB/T 20145 — Photobiological safety of lamps and lamp systems — UV, visible, IR hazard groups (SAC/SAMR, aligned with IEC 62471) | In addition to blue light hazard, IEC 62471 assesses UV radiation hazard (actinic UV, near-UV) and infrared thermal radiation hazard for lamps and lamp systems. For LED luminaires, UV and infrared hazard groups are typically low (RG0 or RG1 for most general LED products) but must be documented. In Laos, these assessments are not explicitly mandated by any specific regulation as of the verified date, but IEC 62471 full-scope documentation covering all hazard groups is recognised good practice under ASEAN frameworks and may be requested by DOSM or commercial buyers for high-output or specialty LED luminaires.IEC 62471 — Photobiological safety of lamps and lamp systems (full scope: UV, visible, IR hazard groups) IEC TR 62778 — Application of IEC 62471 for the assessment of blue light hazard to light sources and luminaires |
No mandatory UV/IR photobiological safety regulation in Laos for LED luminaires as of the verified date. Chinese GB/T 20145 UV/IR hazard group data is technically equivalent to IEC 62471 and reusable for Laos market documentation without retesting. For high-output or specialty LED luminaires (floodlights, grow lights, UV-C disinfection — if applicable), UV hazard group documentation is especially recommended. Confirm with DOSM or commercial buyers whether full IEC 62471 scope documentation is required for the specific product type.[INFORMATIONAL] Laos has no mandatory UV or IR photobiological safety regulation for LED luminaires as of the verified date. IEC 62471 full-scope documentation (including UV and IR hazard groups) is recommended good practice, especially for high-output or specialty luminaires. Chinese GB/T 20145 data is technically equivalent and reusable. Confirm buyer and DOSM documentation expectations for the specific product type. | IEC — International Electrotechnical Commission2026-06-16 · reference |
| Hazardous Substance Restrictions — No Horizontal RoHS Law in Laos | China's hazardous substance restriction regime for EEE is governed by GB/T 26572-2011 (Requirements for concentration limits for certain restricted substances in EEE), covering 6 substances (Pb, Hg, Cd, Cr(VI), PBB, PBDE). China RoHS 2 (SJ/T 11364-2014) mandates a hazardous substance disclosure label on EEE sold in China. These Chinese obligations do not extend to export products shipped to Laos, as Laos has no equivalent law. The 4 phthalates (DEHP, BBP, DBP, DIBP) added in EU law are also absent from China's mandatory list and from Laos law.GB/T 26572-2011 — Requirements for concentration limits for certain restricted substances in EEE (SAC/SAMR, 6 substances) SJ/T 11364-2014 — Marking for the restricted use of hazardous substances in EEE (China RoHS 2 disclosure label) |
Laos does not have a horizontal RoHS law restricting hazardous substances in electrical and electronic equipment (EEE) equivalent to EU RoHS 2011/65/EU or China RoHS (GB/T 26572). As of the verified date, there is no Laos statute mandating concentration limits for lead (Pb), mercury (Hg), cadmium (Cd), hexavalent chromium (Cr(VI)), polybrominated biphenyls (PBB), polybrominated diphenyl ethers (PBDE), or phthalates in EEE homogeneous materials placed on the Laos market. DOSM conformity certification for regulated electrical goods covers electrical safety and EMC parameters, not chemical substance restriction. Exporters should confirm with DOSM and customs authorities whether any substance restriction declarations are required at the border.No horizontal RoHS law in force in Laos as of 2026-06-16 DOSM (Laos) conformity certification — does not include chemical substance restriction equivalent to RoHS |
No gap in the sense of an additional Laos obligation beyond Chinese requirements — Laos imposes no horizontal RoHS substance restriction on LED luminaires as of the verified date. Chinese manufacturers shipping products to Laos do not face phthalate testing, SVHC tracking, or RoHS DoC obligations arising from Laos law. However, commercial buyers (especially those reselling into EU or other RoHS markets) may contractually require RoHS test reports. Exporters should monitor for any future Laos EEE substance restriction regulation, as ASEAN member states are gradually aligning with international frameworks.[INFORMATIONAL] Laos has no horizontal RoHS law restricting hazardous substances in EEE as of the verified date. LED luminaire exporters from China to Laos face no Laos-law RoHS substance restriction obligations. Chinese RoHS disclosure obligations (China RoHS 2 label) apply to domestic CN market products only. Commercial buyers may contractually require RoHS test evidence. Monitor for future Laos regulatory developments in this area. | DOSM — Department of Standards and Metrology, Lao PDR2026-06-16 · reference |
| Chemical Substance Disclosure — Buyer and Supply Chain Requirements | Chinese manufacturers with export experience typically maintain RoHS test reports (6-substance and 10-substance) and REACH SVHC declarations for EU and North American markets. These documents can be repurposed to satisfy buyer-driven substance declaration requirements in Laos without additional testing in most cases. China RoHS 2 domestic disclosure labelling (SJ/T 11364-2014) is not relevant to Laos export products and does not substitute for international buyer substance declarations.RoHS 10-substance test reports (IEC 62321 series) — available from export-oriented Chinese manufacturers REACH SVHC declarations — available from export-oriented Chinese manufacturers for EU-market supply chains |
Although Laos has no mandatory hazardous substance restriction law for EEE, commercial and institutional buyers in Laos (government tenders, NGO procurement, international hotel and building projects) may impose contractual requirements for substance declarations, Safety Data Sheets (SDS), or RoHS/REACH compliance evidence. MEM government procurement for energy-efficiency programmes may stipulate minimum documentation standards including substance declarations aligned with international norms. LNTA (Lao National Tourism Authority) or international hotel chain procurement may require RoHS-compliant documentation for LED luminaire supplies. These buyer-driven requirements are separate from any statutory obligation and must be confirmed contract by contract.No statutory RoHS obligation in Laos — buyer-driven contractual requirements only MEM (Laos) government procurement standards for energy-efficiency programmes International buyer specifications referencing RoHS 2011/65/EU, REACH, or equivalent |
Gap is buyer-driven, not statutory. Chinese manufacturers supplying Laos government tenders, MEM-linked energy programmes, international hotel chains, or NGO procurement should prepare: (1) RoHS 10-substance test report (IEC 62321 series) even though not legally required in Laos; (2) REACH SVHC declaration if EU-aligned buyers are in the chain; (3) Safety Data Sheets (SDS) for components if required by buyer. Manufacturers already holding EU-market RoHS documentation can typically reuse it for Laos buyers without additional testing.[INFORMATIONAL] Laos imposes no statutory substance restriction on LED luminaire imports. However, MEM government procurement, international hotel projects, and NGO buyers may contractually require RoHS 10-substance test reports and REACH SVHC declarations. Chinese manufacturers holding EU-market substance documentation can generally reuse it for Laos buyers. Confirm exact documentation requirements in each tender or contract before shipment. | MEM — Ministry of Energy and Mines, Lao PDR2026-06-16 · reference |
| Wireless Smart LED — MTPC Type Approval (Radio Spectrum / Laos PDR) | China's equivalent for wireless-enabled luminaires is SRRC (State Radio Regulation Commission) type approval, required for any product incorporating a radio transmitter sold in China. SRRC type approval covers frequency, power, and spurious emission compliance. Chinese SRRC type approval does not satisfy Laos MTPC requirements; a separate MTPC application is required for the Laos market. Non-wireless LED luminaires are not subject to SRRC in China.SRRC type approval — required for wireless-transmitting devices sold in China (SRRC / MIIT) GB/T 22450.1 — Radio frequency characteristics and tests for wireless LAN equipment (China) |
LED luminaires incorporating wireless radio interfaces (Wi-Fi 2.4/5 GHz, Bluetooth, Zigbee, Z-Wave, or similar) require radio type approval from MTPC (Ministry of Technology and Communications, Lao PDR) before they can be sold or operated in Laos. MTPC manages radio spectrum and issues type approvals for radio-transmitting devices. The type approval process requires technical specifications and test evidence; MTPC may accept test reports from CNAS-accredited or ILAC MRA-recognised laboratories. Products lacking MTPC type approval may be detained at customs. Non-wireless LED luminaires are not subject to MTPC requirements.MTPC (Ministry of Technology and Communications, Lao PDR) — radio type approval for wireless devices Laos Telecommunications Law and radio spectrum regulations (MTPC) |
Chinese SRRC type approval does not transfer to Laos — a separate MTPC application is required for wireless-enabled LED luminaires. Key gaps: (1) MTPC type approval process timeline and fees should be confirmed early; (2) test reports from CNAS or ILAC MRA labs may be accepted by MTPC — confirm accepted accreditation bodies; (3) frequency band allocations (2.4 GHz, 5 GHz, Bluetooth/Zigbee sub-GHz) should be verified against Laos ITU-aligned spectrum plan; (4) non-wireless LED luminaires are not subject to MTPC and face no radio compliance gap. Transit via Thailand may trigger additional radio type approval requirements for Thailand; verify if transit customs inspection applies.[INFORMATIONAL] Wireless-enabled LED luminaires (Wi-Fi, Bluetooth, Zigbee) require MTPC type approval before sale or use in Laos. Chinese SRRC type approval does not satisfy MTPC requirements. Confirm accepted laboratory accreditation, frequency band allocations, and MTPC application timeline before product launch. Non-wireless LED luminaires are not subject to MTPC radio requirements. | MTPC — Ministry of Technology and Communications, Lao PDR2026-06-16 · reference |
| Electrical Safety — General Luminaire (DOSM Conformity / IEC 60598-1) | China's general luminaire safety standard is GB/T 7000.1-2023 (Luminaires — Part 1: General requirements and tests), replacing GB 7000.1-2015 from 1 January 2026. CCC (China Compulsory Certification) is required for in-scope luminaires under CNCA-C10-01. China's nominal grid voltage is 220 V (vs. Laos 230 V), so voltage compatibility must be verified. CCC test reports and GB/T 7000.1 evidence are not automatically accepted by DOSM and do not substitute for Laos conformity certification.GB/T 7000.1-2023 — Luminaires — Part 1: General requirements and tests (replaces GB 7000.1-2015 from 1 January 2026) CNCA-C10-01 — CCC certification rules for luminaires |
LED luminaires sold in Laos must satisfy DOSM (Department of Standards and Metrology) mandatory conformity certification requirements for regulated goods. Laos adopts IEC-based standards under ASEAN frameworks; IEC 60598-1 (Luminaires — Part 1: General requirements and tests) is the applicable technical baseline for luminaire safety. Products must be rated for the Laos grid: 230 V nominal, 50 Hz. DOSM may require a conformity certificate or test report from an accredited laboratory before customs clearance or market placement. The conformity assessment process and documentation requirements should be verified with DOSM directly, as the Laos regulatory framework for electrical products is still developing.DOSM (Laos) mandatory conformity certification for regulated electrical goods IEC 60598-1 — Luminaires — Part 1: General requirements and tests (adopted under ASEAN frameworks) Laos grid: 230 V nominal, 50 Hz (EDL specification) |
Key gaps: (1) Laos nominal voltage is 230 V; China is 220 V — products designed and tested at 220 V must be verified or re-rated for 230 V operation, including driver, thermal, and component ratings. Both markets use 50 Hz so frequency is not a gap. (2) DOSM conformity certification is a separate process from CCC; Chinese CCC evidence may support a DOSM application as supporting documentation but does not satisfy it on its own. (3) Transit via Thailand or Vietnam adds handling time and potential customs complexity — packaging, labelling, and documentation must withstand multi-leg logistics. (4) Laos regulatory framework for electrical products is still developing; requirements should be confirmed directly with DOSM before shipment.[INFORMATIONAL] DOSM mandatory conformity certification is required for regulated LED luminaires entering the Laos market. IEC 60598-1 is the applicable technical baseline under ASEAN frameworks. Chinese CCC certification does not satisfy Laos DOSM requirements. Voltage re-rating from 220 V to 230 V must be verified. The Laos regulatory framework is still developing — confirm current requirements directly with DOSM before shipment. | DOSM — Department of Standards and Metrology, Lao PDR2026-06-16 · reference |
| LED Driver / Control Gear Safety (IEC 61347-2-13 / DOSM Scope) | China's equivalent is GB 19510.14-2014 (Control gear for lamps — Particular requirements for DC or AC supplied electronic controlgear for LED modules), technically aligned with IEC 61347-2-13. CCC may be required for LED drivers in certain power ranges under CNCA-C10-01. China's nominal voltage is 220 V; drivers designed for 220 V must be re-rated or verified for 230 V Laos grid operation. Chinese CCC test reports do not substitute for Laos DOSM conformity certification.GB 19510.14-2014 — Control gear for lamps — Particular requirements for DC or AC supplied electronic controlgear for LED modules (SAC/SAMR) CNCA-C10-01 — CCC certification rules for luminaires and control gear |
LED drivers (control gear for LED modules) sold or integrated into luminaires in Laos are subject to DOSM conformity requirements for regulated electrical goods. IEC 61347-2-13 (Lamp controlgear — Part 2-13: Particular requirements for DC or AC supplied electronic controlgear for LED modules) is the applicable IEC baseline adopted under ASEAN frameworks. Drivers must be rated for 230 V, 50 Hz. Where the driver is integrated into a luminaire, it is typically assessed as part of the luminaire-level DOSM conformity process. DOSM scope for standalone drivers should be verified directly.DOSM (Laos) conformity certification for regulated electrical goods IEC 61347-2-13 — Lamp controlgear — Part 2-13: Particular requirements for DC or AC supplied electronic controlgear for LED modules (adopted under ASEAN frameworks) Laos grid: 230 V nominal, 50 Hz (EDL specification) |
Key gaps: (1) Voltage difference — drivers rated for China 220 V must be re-rated or verified for Laos 230 V; IEC 61347-2-13 testing at 230 V is needed. (2) DOSM conformity scope for standalone LED drivers vs. integrated drivers should be confirmed — integrated drivers are typically covered under luminaire-level assessment. (3) Chinese CCC evidence does not satisfy Laos DOSM requirements. (4) Both markets use 50 Hz, so no frequency gap exists for the driver.[INFORMATIONAL] LED drivers integrated in luminaires are typically assessed under the luminaire-level DOSM conformity process. IEC 61347-2-13 is the applicable technical baseline under ASEAN frameworks. Chinese GB 19510.14 CCC evidence does not satisfy Laos requirements. Voltage re-rating from 220 V to 230 V must be verified. Confirm current DOSM scope for standalone drivers directly before shipment. | DOSM — Department of Standards and Metrology, Lao PDR2026-06-16 · reference |
E-E-A-T
Named editorial review
Pending named reviewer
Official regulator, standards body, notified body, customs, or primary legal source preferred. Local PDFs are not accepted.
Editorial controlsRows must include publisher, official URL, access date, verification flag, and last_verified before human_reviewed can be true.
SOURCES
Official-source register.
- MEM — Ministry of Energy and Mines, Lao PDR · accessed 2026-06-16 · reference · used in 2 rows
- EDL — Electricite du Laos · accessed 2026-06-16 · reference · used in 1 rows
- DOSM — Department of Standards and Metrology, Lao PDR · accessed 2026-06-16 · reference · used in 5 rows
- IEC — International Electrotechnical Commission · accessed 2026-06-16 · reference · used in 2 rows
- MTPC — Ministry of Technology and Communications, Lao PDR · accessed 2026-06-16 · reference · used in 1 rows