CROSS-STANDARD public interest · LED luminaire
China-to-Côte d'Ivoire LED Luminaire Compliance Gap Matrix
AI-compiled from official public sources — cross-checked by multiple AI models, not human-verified. Informational only; see disclaimer. Public-interest, source-linked comparison of common China LED luminaire documentation against Côte d'Ivoire requirements — CODINORM national standards (NI, adopting IEC 60598 / 62560 / 62471), the import Verification of Conformity (VoC) programme administered under the Ministry of Trade, energy labelling, ARTCI radio approval for smart luminaires, French-language documentation, and an in-country importer — versus Chinese GB standards and CCC certification.
Dataset 2026-06-11
Last verified 2026-06-15
11 rows
GAP MATRIX
Compliance Gap Matrix
| Compliance item | Common China baseline | Côte d'Ivoire (CODINORM) | Gap / action | Source + verification date |
|---|---|---|---|---|
| Energy Efficiency / Performance for LED Light Sources (CODINORM NI, IEC-based) | China's equivalent is GB 30255-2019 (Energy efficiency requirements for LED room luminaires). It defines three energy efficiency grades: Grade 1 (highest) ≥90 lm/W; Grade 2 ≥80 lm/W; Grade 3 ≥70 lm/W. Grade 3 is the minimum for market entry in China. The China Energy Label (CEL) registration is mandatory for GB 30255-covered products and is administered by SAMR. China therefore enforces a binding minimum-efficacy floor that Côte d'Ivoire generally does not apply through a dedicated law.GB 30255-2019 — Energy efficiency requirements for LED room luminaires (SAC/SAMR) China Energy Label (CEL) scheme — administered by SAMR |
Côte d'Ivoire does not operate an EU Ecodesign-style binding minimum-efficacy regime with legally fixed lm/W, CRI, lifetime and power-factor thresholds for LED light sources. CODINORM (Côte d'Ivoire de normalisation) issues national standards (NI) that generally adopt the IEC base for lighting performance (e.g. IEC 62612 for self-ballasted LED lamps, IEC 60598 for luminaires). Where an energy-efficiency or minimum-performance requirement is enforced, it is applied through the import Verification of Conformity (VoC) programme administered under the Ministry of Trade rather than a standalone ecodesign law. There may be regional ECOWAS/UEMOA energy-efficiency initiatives (e.g. minimum energy performance standards for lighting) being adopted progressively — confirm whether any apply to your specific product with CODINORM before shipment.CODINORM national standards (NI) adopting IEC 62612 / IEC 60598 (lighting performance base) Verification of Conformity (VoC) import programme — Ministry of Trade / CODINORM (where energy/performance requirements are enforced) |
Unlike the EU, Côte d'Ivoire does not impose a standalone binding ecodesign minimum-efficacy law with fixed lm/W, CRI, lifetime and power-factor thresholds. Performance expectations are channelled through CODINORM NI standards (IEC-based) and the VoC import check. A Chinese product meeting GB 30255 Grade 1 or 2 will typically satisfy any IEC-based performance expectation, but the manufacturer cannot rely on the Chinese CEL registration as proof — Côte d'Ivoire requires its own VoC documentation. Watch for progressively adopted ECOWAS/UEMOA regional minimum energy performance standards for lighting, which may introduce a binding efficacy floor over time; verify current applicability with CODINORM before each shipment.[INFORMATIONAL] Côte d'Ivoire does not enforce an EU-style standalone ecodesign minimum-efficacy law for LED light sources; performance is addressed through IEC-based CODINORM national standards (NI) and the import Verification of Conformity (VoC) programme. A Chinese product at GB 30255 Grade 1 or 2 generally satisfies IEC-based performance expectations, but the China Energy Label registration is not accepted as proof — Côte d'Ivoire requires its own VoC documentation. Monitor progressively adopted ECOWAS/UEMOA regional minimum energy performance standards for lighting and confirm current applicability with CODINORM before each shipment. | CODINORM (Côte d'Ivoire de normalisation)2026-06-15 · reference |
| Energy Label for Lighting + French-Language Marking (CODINORM / Ministry of Trade) | China's China Energy Label (CEL) under GB 30255-2019 is mandatory for LED room luminaires; products must be registered (CQC/CECP route) before affixing the CEL, which shows Grade 1–3 based on absolute lm/W thresholds. Chinese product marking and instructions are in Chinese. There is no mutual recognition between the Chinese CEL scheme and any Côte d'Ivoire energy-label or French-language marking requirement.GB 30255-2019 — Energy efficiency requirements for LED room luminaires (SAC/SAMR) China Energy Label (CEL) scheme — administered by SAMR/CQC/CECP |
Where an energy label applies to lighting in Côte d'Ivoire, it is delivered through CODINORM national standards (NI) and the Ministry of Trade rather than the EU EPREL/A-G framework. Côte d'Ivoire does not operate the EU EPREL product registry. Product marking, instructions, and any label content must be available in French (the official language). Practical expectations for in-scope products: rated power and luminous flux declared on packaging; an energy class shown where a national or regional energy-label scheme is in force for lighting; and clear French-language product information for customs and the in-country importer. The applicable label format and whether lighting is currently in scope should be confirmed with CODINORM, as the regime is developing and may align with ECOWAS/UEMOA regional labelling over time.CODINORM national standards (NI) — energy/performance labelling for lighting (where in force) Côte d'Ivoire consumer information / French-language marking requirements (Ministry of Trade) |
Two practical gaps: (1) Côte d'Ivoire does not use the EU EPREL registry or A-G label, so a Chinese product carries neither — but where a national/regional lighting energy label is in force, the manufacturer must produce the locally required label format rather than relying on the Chinese CEL grade (the schemes are not mutually recognised and use different metrics). (2) French-language marking and documentation is a hard requirement in Côte d'Ivoire; Chinese-only packaging and instructions are insufficient. The manufacturer must add French product information, declared power and luminous flux, and any locally required energy class, and work with the in-country importer to confirm the current label format with CODINORM before shipment.[INFORMATIONAL] Côte d'Ivoire does not operate the EU EPREL registry or the A-G energy label; any lighting energy label is delivered through CODINORM and the Ministry of Trade and applies only where a national or regional scheme is in force. The Chinese CEL grade is not accepted as a substitute and uses a different metric. French-language product marking and documentation is mandatory — Chinese-only packaging is insufficient. Declare rated power and luminous flux, add any locally required energy class, and confirm the current label format with CODINORM and the in-country importer before shipment. | CODINORM (Côte d'Ivoire de normalisation)2026-06-15 · reference |
| EMC Emissions for Lighting Equipment (CODINORM NI / CISPR 15 base) | China's equivalent is GB 17743-2017 (Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment), which is technically aligned with CISPR 15. For luminaires sold in China, GB 17743 compliance is required as part of CCC certification (covering safety and EMC for relevant categories). Testing is conducted at CNAS/CMA-accredited laboratories. The Chinese CCC EMC report is the domestic proof of compliance.GB 17743-2017 — Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (SAC/SAMR, aligned with CISPR 15) | Côte d'Ivoire does not enforce an EU EMC-Directive-style standalone electromagnetic-compatibility law for lighting. Where EMC is assessed, it is through CODINORM national standards (NI) that adopt the IEC/CISPR base — CISPR 15 (radio disturbance characteristics of electrical lighting and similar equipment, conducted 150 kHz–30 MHz and radiated emissions) — and is verified within the import Verification of Conformity (VoC) programme administered under the Ministry of Trade. A VoC Certificate of Conformity referencing the applicable IEC/CISPR-based NI standard is generally what customs at Abidjan or San-Pedro expects, not a CE-style EMC Declaration of Conformity. Luminaires with integrated wireless functionality are additionally subject to ARTCI radio approval (see ledci-emc-02).CODINORM national standards (NI) adopting CISPR 15 — radio disturbance characteristics of electrical lighting and similar equipment Verification of Conformity (VoC) import programme — Ministry of Trade / CODINORM |
Both GB 17743 and the CODINORM NI EMC base derive from CISPR 15, so the technical emission limits are largely harmonized and a product already passing GB 17743 should meet the same limits. The gap is procedural and documentary: (1) Côte d'Ivoire verifies EMC inside the VoC import programme and expects a VoC Certificate of Conformity, not a CCC certificate — the Chinese CCC EMC report is not the accepted clearance document; (2) the conformity-assessment body appointed for the VoC programme will reference the applicable IEC/CISPR-based NI standard, so the test report should be from an ILAC MRA-recognised laboratory (most Chinese CNAS labs qualify) and traceable to CISPR 15; (3) wireless luminaires need separate ARTCI radio approval. Confirm the exact VoC route and acceptable test-report provenance with the appointed body and the in-country importer before shipment.[INFORMATIONAL] Côte d'Ivoire has no EU-style standalone EMC law; lighting emissions are assessed against CISPR 15-based CODINORM national standards (NI) inside the import Verification of Conformity (VoC) programme. Emission limits are broadly harmonized with China's GB 17743 (both CISPR 15-derived), so re-testing burden is limited, but the accepted clearance document is a VoC Certificate of Conformity — not the Chinese CCC report. Use an ILAC MRA-recognised laboratory and confirm the VoC route and acceptable test-report provenance with the appointed body and importer. Smart luminaires also require ARTCI radio approval. | CODINORM (Côte d'Ivoire de normalisation)2026-06-15 · reference |
| Radio Approval for Smart / Wireless Luminaires (ARTCI) | China's equivalent for radio-transmitting products is the SRRC (State Radio Regulation of China) Type Approval (型号核准), mandatory for radio transmission equipment sold in China, plus CCC where applicable. A smart luminaire with wireless functions sold in China needs SRRC approval covering its frequency bands and transmit power. SRRC approval is domestic only and is not recognised by ARTCI.SRRC Type Approval (型号核准) — State Radio Regulation of China (mandatory for radio transmission equipment) | Luminaires with integrated radio functionality (Bluetooth dimming, Wi-Fi/Zigbee smart lighting, RF remote control) require radio-equipment type approval / homologation from ARTCI (Autorité de Régulation des Télécommunications/TIC de Côte d'Ivoire) before import and market placement. ARTCI governs use of the radio spectrum and equipment authorisation in Côte d'Ivoire. The applicant (typically the in-country importer or an appointed representative) submits product radio specifications, frequency bands, transmit power, and supporting test evidence (commonly IEC/ETSI-based radio test reports). This is separate from, and additional to, the EMC and safety conformity handled through the CODINORM/VoC route.ARTCI radio equipment type approval / homologation — Autorité de Régulation des Télécommunications/TIC de Côte d'Ivoire Côte d'Ivoire telecommunications / spectrum regulation framework |
A smart/wireless luminaire that already holds Chinese SRRC approval cannot rely on it for Côte d'Ivoire — ARTCI requires its own type approval / homologation. The two regimes are not mutually recognised. Practical steps for export: (1) confirm the product's radio bands and transmit power are permitted under Côte d'Ivoire spectrum rules; (2) appoint the in-country importer or a local representative to file the ARTCI application; (3) supply IEC/ETSI-based radio test reports and product documentation in French; (4) obtain ARTCI approval before import, in addition to the CODINORM/VoC conformity for the luminaire's electrical safety and EMC. Non-wireless luminaires do not need ARTCI approval.[INFORMATIONAL] Smart or wireless LED luminaires require ARTCI radio equipment type approval / homologation before import into Côte d'Ivoire — a separate obligation from the CODINORM/VoC electrical-safety and EMC conformity. Chinese SRRC approval is domestic only and is not recognised by ARTCI. Appoint the in-country importer or a local representative to file, supply IEC/ETSI-based radio test reports and French documentation, and obtain ARTCI approval before shipment. Non-wireless luminaires are out of ARTCI scope. | ARTCI (Autorité de Régulation des Télécommunications/TIC de Côte d'Ivoire)2026-06-15 · reference |
| Photobiological Safety — Blue Light Hazard (CODINORM NI / IEC 62471) | China has adopted GB/T 20145-2006 (Photobiological safety of lamps and lamp systems), technically equivalent to IEC 62471:2006. GB/T 20145 is a recommended standard (T = tuijian, recommended) and is not universally mandatory for all LED luminaires in the Chinese market; enforcement for residential luminaires is not uniformly prescribed. The risk-group classification framework (RG0–RG3) is shared with the IEC base.GB/T 20145-2006 — Photobiological safety of lamps and lamp systems (SAC/SAMR — recommended standard, equivalent to IEC 62471:2006) | Côte d'Ivoire does not have an EU Ecodesign-style legal mandate that specifically requires photobiological risk-group declaration for every LED light source. Where photobiological safety is assessed, it is through CODINORM national standards (NI) adopting the IEC base — IEC 62471 (Photobiological safety of lamps and lamp systems), which classifies products into risk groups RG0 (Exempt) to RG3 (High risk) based on blue-light-weighted radiance and irradiance. In practice, IEC 62471 evidence may be requested within the import Verification of Conformity (VoC) programme as part of the general product-safety assessment for luminaires, rather than as a standalone declaration with its own label. RG2 and RG3 products should carry usage warnings. Confirm whether photobiological evidence is required for the specific product with CODINORM and the appointed conformity-assessment body.CODINORM national standards (NI) adopting IEC 62471 — Photobiological safety of lamps and lamp systems Verification of Conformity (VoC) import programme — Ministry of Trade / CODINORM (where photobiological evidence is requested) |
Both Côte d'Ivoire (via CODINORM NI / IEC 62471) and China (via GB/T 20145) share the same IEC risk-group framework, so the technical assessment is largely transferable — a Chinese IEC 62471 / GB/T 20145 risk-group test report is a useful starting point. The differences are: (1) neither market imposes the EU-style standalone legal photobiological declaration, but Côte d'Ivoire may request IEC 62471 evidence inside the VoC product-safety assessment, whereas Chinese GB/T 20145 is recommended-only; (2) any product warnings and documentation for Côte d'Ivoire must be in French; (3) RG2/RG3 luminaires should carry usage warnings in both markets. Manufacturers should keep a defensible IEC 62471 risk-group assessment in the technical file and confirm with the appointed VoC body whether it must be submitted for the specific product.[INFORMATIONAL] Côte d'Ivoire has no EU-style standalone legal photobiological declaration; risk-group classification is handled through IEC 62471-based CODINORM national standards (NI) and may be requested within the import Verification of Conformity (VoC) product-safety assessment. The IEC 62471 risk-group framework is shared with China's GB/T 20145, so a Chinese risk-group report transfers well, but Chinese GB/T 20145 is recommended-only and is not accepted as a substitute clearance document. Keep a defensible IEC 62471 assessment in the technical file, provide French-language warnings for RG2/RG3 products, and confirm submission requirements with the appointed VoC body. | CODINORM (Côte d'Ivoire de normalisation)2026-06-15 · reference |
| Blue Light Hazard Labelling — No Mandatory Label Regime (Côte d'Ivoire) | China's China Energy Label (CEL) under GB 30255 does not include a blue light hazard class either; the Chinese labelling regime focuses on energy-efficiency grades and lumen output. Neither China nor Côte d'Ivoire mandates the EU-style blue-light-class label on luminaire packaging, so on this specific point the two markets are aligned in not requiring it.GB 30255-2019 — Energy efficiency requirements for LED room luminaires (SAC/SAMR — no blue light class requirement) | Côte d'Ivoire does not operate the EU energy-labelling framework (Delegated Reg 2019/2015) and therefore has no legal requirement equivalent to the EU blue-light-hazard class that must appear on the product energy label. There is no mandatory plain-language blue-light class ('No risk / Low risk / Moderate risk') prescribed for LED luminaire packaging in Côte d'Ivoire. General product-safety good practice still applies: RG2/RG3 products (per the IEC 62471 assessment in ledci-photobio-01) should carry appropriate usage warnings, and any such warnings and instructions must be in French. Manufacturers should confirm current requirements with CODINORM, as the regime may evolve toward IEC/regional labelling practice over time.No EU-equivalent blue-light-hazard labelling regime in Côte d'Ivoire General product-safety good practice + French-language marking (Ministry of Trade / CODINORM) |
On the blue-light-class label specifically, there is no gap to close for Côte d'Ivoire: neither market requires the EU label class, so a Chinese product does not need to add it for Côte d'Ivoire (unlike the EU, where it is mandatory). The only carry-over obligations are: (1) any RG2/RG3 usage warnings derived from the IEC 62471 assessment should appear on the product, and (2) those warnings, like all product information, must be in French for Côte d'Ivoire. Do not assume the EU blue-light label is required here — it is not. Re-verify with CODINORM if the regime changes.[INFORMATIONAL] Côte d'Ivoire does not operate the EU energy-labelling framework and has no mandatory blue-light-hazard class label for LED luminaires — unlike the EU, where it is required. China's CEL likewise has no blue-light class, so on this point the two markets align. The only carry-over obligations are RG2/RG3 usage warnings derived from the IEC 62471 assessment and the general requirement that all product information and warnings be in French. Do not add the EU label class assuming it is required; re-verify with CODINORM if the regime evolves. | CODINORM (Côte d'Ivoire de normalisation)2026-06-15 · reference |
| Hazardous-Substance Restriction — No Horizontal RoHS Regime (Côte d'Ivoire) | China operates its own RoHS-style regime: GB/T 26572 (concentration limit requirements for restricted substances) and the China RoHS 2 administrative measures (Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products), with the SJ/T 11364 marking (green-circle 'e' for compliant; orange Environmental Protection Use Period number for products containing restricted substances above limits). China RoHS restricts the same core six substances as EU RoHS (lead, mercury, cadmium, hexavalent chromium, PBB, PBDE) but does not include the four EU-added phthalates as a mandatory restriction in the same way.GB/T 26572 — Requirements of concentration limits for certain restricted substances in electrical and electronic products China RoHS 2 — Management Methods for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products; SJ/T 11364 marking |
Côte d'Ivoire does not operate an EU-style horizontal RoHS regime restricting specific hazardous substances (lead, mercury, cadmium, hexavalent chromium, PBB, PBDE, and the EU-added phthalates) in electrical and electronic equipment. There is no standalone substance-restriction law for LED luminaires equivalent to EU Directive 2011/65/EU. General product-safety obligations, the CODINORM national standards (NI) covering electrical safety, and the import Verification of Conformity (VoC) programme still apply, and any chemical-hazard concern would be handled through general safety rather than a dedicated RoHS substance list. Manufacturers should not assume a RoHS declaration is required for customs clearance — but should verify current requirements before each shipment, as environmental regulation in the region is developing.No EU-equivalent horizontal RoHS substance-restriction regime in Côte d'Ivoire General product-safety obligations + CODINORM national standards (NI) for electrical safety |
This is a reverse gap: China imposes a RoHS-style substance restriction (China RoHS 2 + GB/T 26572 + SJ/T 11364 marking) while Côte d'Ivoire does not impose any horizontal RoHS substance-restriction regime. A Chinese manufacturer therefore already meets a stricter hazardous-substance baseline than Côte d'Ivoire requires, and no Côte d'Ivoire RoHS declaration or substance-test report is needed for market entry. Practical notes: (1) do not over-engineer compliance by assuming an EU/Côte d'Ivoire RoHS step that does not exist; (2) the Chinese SJ/T 11364 marking and any China RoHS documentation are not required by Côte d'Ivoire customs; (3) re-verify before each shipment, since regional environmental/e-waste regulation may evolve and could introduce future substance controls.[INFORMATIONAL] Côte d'Ivoire does not operate an EU-style horizontal RoHS hazardous-substance regime — there is no standalone RoHS substance-restriction obligation or required RoHS declaration for LED luminaires. This is a reverse gap: a Chinese manufacturer already complies with China RoHS 2 (GB/T 26572 + SJ/T 11364), a stricter baseline than Côte d'Ivoire requires. The Chinese RoHS marking is not needed for Côte d'Ivoire customs. Do not add a non-existent RoHS step; re-verify before each shipment as regional environmental regulation evolves. | CODINORM (Côte d'Ivoire de normalisation)2026-06-15 · reference |
| Mercury / Hazardous Materials in Lighting — Minamata Context (Côte d'Ivoire) | China is also a party to the Minamata Convention and restricts mercury content in lamps under China RoHS 2 / GB/T 26572 (mercury is one of the six restricted substances). For LED products, mercury is not intentionally added, so compliance is straightforward; for fluorescent lamps, China applies mercury content limits and is part of the international phase-down. Chinese LED products therefore already align with a no-added-mercury baseline.China RoHS 2 / GB/T 26572 — mercury concentration limit (one of six restricted substances) Minamata Convention on Mercury (China is a party) |
LED luminaires do not contain intentionally added mercury (unlike fluorescent lamps), so mercury-restriction concerns are generally not triggered for pure-LED products. Côte d'Ivoire has no EU-style RoHS mercury limit specific to EEE, but as a party to the Minamata Convention on Mercury, the country participates in the international phase-down of mercury-added products including certain fluorescent lamps. For LED products this is largely a non-issue, but manufacturers shipping mixed catalogues (e.g. LED plus any fluorescent/CFL lines) should be aware that mercury-added lamp categories face progressive international phase-out. There is no Côte d'Ivoire LED-specific mercury declaration requirement.Minamata Convention on Mercury (international — phase-down of mercury-added products including certain lamps) No Côte d'Ivoire LED-specific mercury declaration requirement |
For pure-LED luminaires there is effectively no gap: no intentional mercury is present, both China and Côte d'Ivoire are Minamata parties, and Côte d'Ivoire imposes no LED-specific mercury declaration. The only watch-point is mixed catalogues: any fluorescent/CFL lines a manufacturer also exports may face progressive Minamata-driven phase-out in destination markets, but this does not affect the LED products themselves. No additional Côte d'Ivoire mercury documentation is required for LED luminaires. Keep a simple no-added-mercury statement in the technical file as good practice.[INFORMATIONAL] For pure-LED luminaires there is effectively no mercury gap: no intentional mercury is present, both China and Côte d'Ivoire are Minamata Convention parties, and Côte d'Ivoire imposes no LED-specific mercury declaration. The Minamata phase-down targets mercury-added lamps such as fluorescents, not LEDs. Manufacturers exporting mixed catalogues should track phase-out of any fluorescent/CFL lines separately. Keep a simple no-added-mercury statement in the technical file as good practice; no additional Côte d'Ivoire mercury documentation is required for LEDs. | CODINORM (Côte d'Ivoire de normalisation)2026-06-15 · reference |
| Packaging, WEEE / E-Waste and Battery — No EU-Style Horizontal Regimes (Côte d'Ivoire) | China operates its own producer-responsibility and recycling framework: the WEEE-equivalent catalogue and fund system (废弃电器电子产品回收处理管理条例) for listed product categories, and battery management rules. China does not replicate the EU WEEE crossed-out-bin marking as a market-entry condition in the same way, but listed product categories carry recycling-fund and take-back obligations domestically. These Chinese domestic obligations are not recognised by, nor required for, Côte d'Ivoire.China WEEE regulation (废弃电器电子产品回收处理管理条例) — recycling fund / take-back for listed categories China battery management rules (where a battery is incorporated) |
Côte d'Ivoire does not operate EU-style horizontal producer-responsibility regimes for LED luminaires equivalent to the EU WEEE Directive (e-waste take-back/registration), the EU Batteries Regulation, or the EU Packaging directives. There is no mandatory WEEE registration, crossed-out-wheelie-bin marking obligation, battery producer-registration, or packaging-recovery scheme prescribed as a condition of LED luminaire market entry in the same horizontal manner as the EU. General environmental, customs, and product-safety rules apply, and emerging national/regional e-waste initiatives may develop over time. Where a luminaire contains a battery (e.g. emergency/rechargeable fittings), confirm any specific import handling with the in-country importer. French-language documentation requirements still apply to any disposal or handling instructions provided.No EU-equivalent horizontal WEEE / Batteries / Packaging producer-responsibility regimes in Côte d'Ivoire General environmental + customs + product-safety rules; emerging national/regional e-waste initiatives |
For Côte d'Ivoire there is no EU-style horizontal WEEE, battery, or packaging producer-responsibility step to complete as a condition of LED luminaire market entry — so a Chinese exporter does not need to register for or mark against these regimes for Côte d'Ivoire. This is the opposite of the EU, where WEEE registration and the crossed-out-wheelie-bin symbol are mandatory. Watch-points: (1) do not assume EU WEEE/battery/packaging obligations apply — they do not horizontally; (2) for battery-containing luminaires, confirm any specific import handling with the in-country importer; (3) provide any disposal/handling instructions in French; (4) re-verify before shipment, as national or regional (ECOWAS/UEMOA) e-waste schemes may emerge.[INFORMATIONAL] Côte d'Ivoire does not operate EU-style horizontal WEEE, battery, or packaging producer-responsibility regimes as a condition of LED luminaire market entry — unlike the EU, where WEEE registration and the crossed-out-wheelie-bin symbol are mandatory. A Chinese exporter does not need to register for or mark against these regimes for Côte d'Ivoire. For battery-containing luminaires, confirm import handling with the in-country importer and provide French-language disposal/handling instructions. Re-verify before each shipment, as national or regional (ECOWAS/UEMOA) e-waste schemes may emerge over time. | CODINORM (Côte d'Ivoire de normalisation)2026-06-15 · reference |
| Electrical Safety of Luminaires (CODINORM NI / IEC 60598) + VoC Certificate of Conformity | China's equivalent is GB 7000.1 (Luminaires — General requirements and tests, aligned with IEC 60598-1) plus the relevant GB 7000.2xx part, and GB 24906 / GB/T 24908 for LED lamps (aligned with IEC 62560 / 62612). For many luminaire and lamp categories, CCC certification (China Compulsory Certification) covers electrical safety and is mandatory for the Chinese market. CCC test reports are issued by Chinese designated certification bodies and accredited labs. The Chinese grid is 220 V / 50 Hz single-phase (and 380 V three-phase).GB 7000.1 / GB 7000.2xx — Luminaires general and particular requirements (SAC/SAMR, aligned with IEC 60598) GB 24906 / GB/T 24908 — LED lamps safety/performance (aligned with IEC 62560 / 62612); CCC certification |
LED luminaires imported into Côte d'Ivoire must meet electrical-safety requirements based on CODINORM national standards (NI) that adopt the IEC base — IEC 60598-1 (Luminaires — General requirements and tests) and the relevant IEC 60598-2 part for the specific luminaire type. For self-ballasted LED lamps, IEC 62560 (and IEC 62612 for performance) is the reference. Côte d'Ivoire's grid is 220 V / 50 Hz single-phase nominal — the same 50 Hz as China and a similar 220 V single-phase nominal (note China three-phase is 380 V), so a product designed for the Chinese 220 V / 50 Hz domestic supply is generally electrically compatible. Conformity is demonstrated through the import Verification of Conformity (VoC) programme administered under the Ministry of Trade with CODINORM involvement: a Certificate of Conformity (per shipment, or via product/licence registration) is generally required for customs clearance at Abidjan or San-Pedro, supported by IEC 60598-based test reports from an ILAC MRA-recognised laboratory and French-language documentation.CODINORM national standards (NI) adopting IEC 60598-1 / IEC 60598-2 (luminaire safety) and IEC 62560 (self-ballasted LED lamps) Verification of Conformity (VoC) import programme — Ministry of Trade / CODINORM (Certificate of Conformity for customs clearance) |
The technical safety base is shared: China's GB 7000 / GB 24906 are aligned with IEC 60598 / IEC 62560, the same IEC family adopted by CODINORM NI, and both grids are 220 V / 50 Hz single-phase — so a Chinese-certified product is generally electrically and technically suitable, with limited re-testing. The gaps are procedural and documentary: (1) the accepted clearance document is the VoC Certificate of Conformity, not the Chinese CCC certificate — CCC is not recognised by Côte d'Ivoire customs; (2) test reports should be traceable to IEC 60598 and issued by an ILAC MRA-recognised laboratory (most Chinese CNAS labs qualify, but confirm market scope); (3) all documentation, marking, and instructions must be in French; (4) an in-country importer must handle the VoC application and clearance. Confirm whether per-shipment certification or a product/licence registration route applies with the appointed conformity-assessment body before shipment.[INFORMATIONAL] LED luminaire electrical safety in Côte d'Ivoire is assessed against IEC 60598 / IEC 62560-based CODINORM national standards (NI) and demonstrated through the import Verification of Conformity (VoC) programme; a Certificate of Conformity is generally required for clearance at Abidjan or San-Pedro. The safety base is shared with China's GB 7000 / GB 24906 and both grids are 220 V / 50 Hz single-phase, so re-testing is limited — but Chinese CCC is not the accepted clearance document. Use IEC 60598 test reports from an ILAC MRA-recognised laboratory, provide French-language documentation, and appoint an in-country importer to handle the VoC application. Confirm the per-shipment vs product/licence registration route with the appointed body before shipment. | CODINORM (Côte d'Ivoire de normalisation)2026-06-15 · reference |
| In-Country Importer, French Documentation and Customs Marking (Côte d'Ivoire) | In China, the domestic market-access responsibility sits with the manufacturer / domestic seller, and product marking and instructions are in Chinese per GB requirements. There is no foreign-importer-of-record concept for the domestic Chinese market, and CCC documentation is in Chinese. The Chinese marking and Chinese-language documentation are not sufficient for Côte d'Ivoire, which requires French and a local importer.GB product marking / instruction requirements (Chinese language) — domestic manufacturer/seller responsibility No foreign-importer-of-record concept for the domestic Chinese market |
Placing LED luminaires on the Côte d'Ivoire market in practice requires an in-country importer / consignee of record who handles customs clearance at Abidjan or San-Pedro and is the local point of responsibility — there is no facility for a foreign manufacturer to self-clear. Product marking, the rating plate, user/installation instructions, warnings, and any conformity documentation must be available in French (the official language). The importer typically files the Verification of Conformity (VoC) application and presents the Certificate of Conformity to customs, along with commercial documents (invoice, packing list, etc.). Smart luminaires additionally need ARTCI radio approval (see ledci-emc-02). Product marking should show the manufacturer, model/type, rated voltage/frequency (220 V / 50 Hz), power, and relevant safety markings consistent with the IEC 60598 base.Côte d'Ivoire import / customs framework — in-country importer (consignee of record) for clearance at Abidjan / San-Pedro French-language product marking, instructions and documentation requirement (Ministry of Trade / CODINORM) |
Two operational gaps a Chinese manufacturer must close for Côte d'Ivoire that do not exist for the domestic Chinese market: (1) Appoint an in-country importer / consignee of record — a foreign manufacturer cannot self-clear at Abidjan or San-Pedro; the importer files the VoC application, presents the Certificate of Conformity, and is the local responsibility point. (2) Translate all product marking, the rating plate, user/installation instructions, warnings, and conformity documentation into French; Chinese-only materials are not acceptable. Additional notes: align the rating plate to 220 V / 50 Hz (compatible with the Chinese domestic single-phase supply); ensure safety markings are consistent with the IEC 60598 base; and route smart/wireless products through ARTCI separately. Plan the importer relationship and French documentation early, as they gate customs clearance.[INFORMATIONAL] Selling LED luminaires in Côte d'Ivoire requires an in-country importer / consignee of record to clear customs at Abidjan or San-Pedro and act as the local responsibility point — a foreign manufacturer cannot self-clear. All product marking, the rating plate, instructions, warnings, and conformity documentation must be in French; Chinese-only materials are insufficient. Align the rating plate to 220 V / 50 Hz, keep safety markings consistent with the IEC 60598 base, and route smart/wireless products through ARTCI separately. Plan the importer relationship and French documentation early, as they gate customs clearance and the VoC certificate presentation. | CODINORM (Côte d'Ivoire de normalisation)2026-06-15 · reference |
E-E-A-T
Named editorial review
Pending named reviewer
Official regulator, standards body, notified body, customs, or primary legal source preferred. Local PDFs are not accepted.
Editorial controlsRows must include publisher, official URL, access date, verification flag, and last_verified before human_reviewed can be true.
SOURCES
Official-source register.
- CODINORM (Côte d'Ivoire de normalisation) · accessed 2026-06-15 · reference · used in 10 rows
- ARTCI (Autorité de Régulation des Télécommunications/TIC de Côte d'Ivoire) · accessed 2026-06-15 · reference · used in 1 rows