CROSS-STANDARD public interest · LED luminaire
China-to-Chile LED Luminaire Compliance Gap Matrix
AI-compiled from official public sources — cross-checked by multiple AI models, not human-verified. Informational only; see disclaimer. Public-interest, source-linked comparison of common China LED luminaire documentation against Chilean SEC (Superintendencia de Electricidad y Combustibles) mandatory certification, INN NCh / IEC 60598 / 62560 / 62471 safety standards, Ministry of Energy efficiency labelling, and SUBTEL radio approval for smart luminaires, versus Chinese GB standards and CCC certification.
Dataset 2026-06-11
Last verified 2026-06-15
11 rows
GAP MATRIX
Compliance Gap Matrix
| Compliance item | Common China baseline | Chile (SEC) | Gap / action | Source + verification date |
|---|---|---|---|---|
| Energy Efficiency Labelling for Lighting (Chile Ministry of Energy / SEC) | China's equivalent is GB 30255-2019 (Energy efficiency requirements for LED room luminaires), defining three energy efficiency grades: Grade 1 (highest) ≥90 lm/W, Grade 2 ≥80 lm/W, Grade 3 ≥70 lm/W, with Grade 3 the minimum for CN market entry. The China Energy Label (CEL) registration with CQC/CECP is mandatory for GB 30255-covered products and is administered by SAMR. GB 30255 sets binding minimum efficacy thresholds for the Chinese market.GB 30255-2019 — Energy efficiency requirements for LED room luminaires (SAC/SAMR) China Energy Label (CEL) scheme — administered by SAMR/CQC/CECP |
Chile operates an energy efficiency labelling regime (etiqueta de eficiencia energetica) administered by the Ministry of Energy together with SEC and the Agencia de Sostenibilidad Energetica. For lighting products in scope, the label communicates an A-G style efficiency class and luminous efficacy (lm/W) information to consumers at the point of sale. The label is issued in connection with the SEC certification/approval process, and the efficiency class is derived from tested performance against the applicable NCh/IEC performance method (e.g., IEC 62612 / IEC 62560 for self-ballasted LED lamps). Where a luminaire class is in scope, the labelling obligation must be met before the product is offered for retail sale in Chile.Chile Ministry of Energy — Programa de Etiquetado de Eficiencia Energetica (energy efficiency labelling for lighting products) SEC certification protocol for lighting products (efficiency label issued in connection with SEC approval) IEC 62612 / IEC 62560 (performance/safety methods adopted as NCh for self-ballasted LED lamps) |
Chile has no EU-style Ecodesign minimum-performance ban (it does not, in general, prohibit lower-efficacy lamps from market entry the way the EU Ecodesign Regulation does); instead its principal lever is consumer-facing efficiency labelling tied to the SEC approval process. The Chilean efficiency class and the CN CEL grade are calculated against different reference methods and are not mutually recognised, so a CN Grade does not determine the Chilean class — the product must be tested and labelled separately for Chile. Chinese manufacturers must (1) confirm whether their specific lighting product class is currently in scope of the Chilean labelling programme; (2) test efficacy under the Chile-accepted IEC method; (3) obtain and display the Chilean energy label issued through the SEC/Ministry of Energy process. A CN CEL registration does not substitute for the Chilean label.[INFORMATIONAL] Chile regulates lighting efficiency primarily through a consumer energy efficiency label tied to the SEC/Ministry of Energy process, not through an EU-style minimum-efficacy market ban. Where the product class is in scope, the Chilean label must be obtained and displayed before retail sale. The Chilean efficiency class and the Chinese CEL grade use different reference methods and are not mutually recognised, so a CN Grade does not establish the Chilean class — verify current Chilean labelling scope and test under the Chile-accepted IEC method. | Ministerio de Energia de Chile (Chile Ministry of Energy)2026-06-15 · reference |
| Performance Testing and Efficacy Declaration for SEC Approval (Chile) | In China, performance of self-ballasted LED lamps is assessed under GB/T 24908 (Self-ballasted LED lamps for general lighting services — Performance requirements) and energy efficiency under GB 30255-2019, with CEL registration based on tested lm/W against absolute grade thresholds. CCC and CEL test reports are produced by CNAS/CMA-accredited Chinese laboratories. These Chinese performance test reports and the CEL grade are not accepted as substitutes within the Chilean SEC certification and Ministry of Energy labelling process.GB/T 24908-2014 — Self-ballasted LED lamps for general lighting services — Performance requirements (SAC/SAMR) GB 30255-2019 — Energy efficiency requirements for LED room luminaires (SAC/SAMR) |
To obtain SEC product certification and the associated efficiency label, the declared performance of an LED lamp/luminaire (luminous flux, luminous efficacy in lm/W, rated power, colour temperature, and rated lifetime) must be substantiated by test reports against the IEC performance methods adopted by INN as Chilean NCh standards (e.g., IEC 62612 for self-ballasted LED lamps performance, IEC 62560 for safety). The test reports must come from a laboratory accepted by the SEC-authorized certifier. The declared efficiency feeds directly into the energy label class. Chile does not impose binding EU-Ecodesign-style minimum CRI, minimum lifetime, or minimum power-factor market-entry thresholds horizontally; rather the declared values must be truthful and substantiated for the label and SEC file.IEC 62612 — Self-ballasted LED lamps for general lighting — Performance requirements (adopted as NCh by INN) IEC 62560 — Self-ballasted LED lamps for general lighting services > 50 V — Safety specifications (adopted as NCh by INN) SEC certification protocol — performance declaration and label class derivation |
Both markets rely on tested lm/W and lamp performance, and the underlying IEC methods (IEC 62612 family) are broadly aligned with GB/T 24908 — so the physics of testing overlaps. The gap is procedural and jurisdictional: Chile requires the performance dossier to be filed within the SEC certification process with a label class derived per the Chilean programme, and the reports must be acceptable to the SEC-authorized certifier; Chinese CEL/CCC reports are not directly transferable. Unlike the EU, Chile does not horizontally mandate minimum CRI, minimum 6,000 h lifetime, or minimum 0.9 power factor as market-entry gates — these are declared values rather than binding thresholds. Manufacturers should confirm the exact NCh editions in force and whether the chosen Chinese lab's reports are accepted by the certifier, otherwise re-testing in a Chile-accepted laboratory is required.[INFORMATIONAL] Chilean SEC approval and the energy label require a substantiated performance dossier (lm/W, flux, power, lifetime) tested against INN-adopted IEC methods such as IEC 62612 / IEC 62560, filed with an SEC-authorized certifier. The IEC test physics overlaps with China's GB/T 24908, but Chinese CEL/CCC reports are not directly transferable and Chile does not impose EU-style horizontal minimum CRI/lifetime/power-factor gates. Confirm current NCh editions and whether the chosen lab's reports are accepted; otherwise re-test in a Chile-accepted laboratory. | Superintendencia de Electricidad y Combustibles (SEC), Chile2026-06-15 · reference |
| Electromagnetic Disturbance / EMC for Lighting in Chile (NCh/IEC vs SEC scope) | China's equivalent is GB 17743-2017 (Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment), technically aligned with CISPR 15. GB 17743 compliance is a mandatory component of CCC certification for luminaires sold in China, tested at CNAS/CMA-accredited Chinese laboratories. The Chinese CCC EMC test report is produced for the CN market and is not a Chilean approval document.GB 17743-2017 — Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (SAC/SAMR, aligned with CISPR 15) | Chile's electrical product approval is centred on the SEC safety certification regime, which is primarily focused on electrical safety (shock, fire, construction) rather than a standalone horizontal EMC directive like the EU EMC Directive. Chile does not, in general, operate an EU-style mandatory EMC marking for general lighting; electromagnetic disturbance characteristics are addressed mainly where they intersect SEC product safety or, for radio-emitting equipment, the SUBTEL telecom regime. Where EMC characteristics are referenced, the applicable technical basis is the IEC/CISPR family (CISPR 15 for lighting radio disturbance) adopted via INN NCh standards. Manufacturers should confirm with the SEC-authorized certifier whether EMC test evidence is required for the specific lighting product class.SEC electrical product safety certification regime (Chile — primary approval is safety-centred) CISPR 15 / IEC family (radio disturbance of lighting equipment) — technical basis adopted via INN NCh where referenced SUBTEL telecom regime (applies to radio-emitting / wireless luminaires) |
Unlike the EU, Chile does not impose a standalone horizontal EMC directive with a separate mandatory EMC declaration for general lighting; EMC is primarily relevant either inside the SEC safety scope or under SUBTEL for radio-emitting equipment. Because both China (GB 17743) and any Chilean EMC reference share the CISPR 15 technical base, the emission-limit physics is broadly harmonised, so a product compliant with GB 17743 is technically close to CISPR 15 expectations. The practical gap is jurisdictional: the Chinese CCC EMC report is for the CN market and is not itself a Chilean approval. Manufacturers must (1) confirm with the SEC-authorized certifier whether EMC evidence is required for the specific product; (2) route any wireless luminaire through SUBTEL (see ledcl-emc-02); (3) not assume CCC EMC documentation satisfies any Chilean requirement without certifier confirmation.[INFORMATIONAL] Chile does not operate an EU-style standalone horizontal EMC directive for general lighting; EMC is mainly relevant within the SEC safety scope or via SUBTEL for radio-emitting equipment. The CISPR 15 technical base is shared with China's GB 17743, so emission-limit physics is broadly harmonised, but the Chinese CCC EMC report is a CN-market document and is not itself a Chilean approval. Confirm with the SEC-authorized certifier whether EMC evidence is required for the specific product class, and route wireless luminaires through SUBTEL. | Superintendencia de Electricidad y Combustibles (SEC), Chile2026-06-15 · reference |
| SUBTEL Equipment Approval for Wireless / Smart Luminaires (Chile) | In China, wireless-enabled luminaires require SRRC (State Radio Regulation Commission) type approval for the radio module, verifying frequency, bandwidth, and transmit power against Chinese radio allocations, in addition to CCC safety certification. The Chinese SRRC approval is specific to Chinese frequency allocations and administrative rules and is not recognised by SUBTEL — the Chilean radio allocations and approval process are separate.SRRC type approval — required for wireless-enabled equipment in China (radio module) | LED luminaires with integrated wireless functionality (Wi-Fi, Bluetooth, Zigbee, or other radio modules for smart/connected lighting) require equipment approval from SUBTEL (Subsecretaria de Telecomunicaciones) before being placed on the Chilean market. SUBTEL administers the type-approval/homologation of radio-emitting equipment and verifies that the device operates within authorized frequency bands and power limits for Chile. This is in addition to, and separate from, the SEC electrical safety certification. The technical basis typically references IEC/CISPR and ITU-aligned radio parameters; the manufacturer or its local representative submits the radio module test evidence to SUBTEL.SUBTEL (Subsecretaria de Telecomunicaciones) — equipment type-approval / homologation for radio-emitting devices (Chile) ITU-aligned frequency band and power-limit allocations for Chile |
Both China (SRRC) and Chile (SUBTEL) require radio-module type approval for connected luminaires, but the two regimes are jurisdiction-specific and not mutually recognised: Chinese SRRC approval does not satisfy SUBTEL, and the authorized frequency bands and power limits differ between China and Chile. Chinese manufacturers exporting smart LED luminaires must (1) verify the radio module's bands/power against Chilean allocations; (2) obtain SUBTEL equipment approval before market placement, typically through a Chilean local representative/importer; (3) keep the SUBTEL approval separate from the SEC safety certification — both are required for a connected luminaire. A non-wireless luminaire does not need SUBTEL approval but still needs SEC certification.[INFORMATIONAL] Smart/wireless LED luminaires require SUBTEL equipment approval in Chile before market placement, separate from and in addition to SEC safety certification. Chinese SRRC approval does not satisfy SUBTEL, and Chilean frequency bands/power limits differ from China's. Verify the radio module against Chilean allocations and obtain SUBTEL approval, typically via a Chilean importer/local representative. Non-wireless luminaires do not need SUBTEL but still require SEC certification. | Subsecretaria de Telecomunicaciones (SUBTEL), Chile2026-06-15 · reference |
| Photobiological Safety — Blue Light Hazard (IEC 62471 as NCh) in Chile | China has adopted GB/T 20145-2006 (Photobiological safety of lamps and lamp systems), technically equivalent to IEC 62471:2006. GB/T 20145 is a recommended standard (T = tuijian, recommended) and is not universally mandatory for all LED luminaires in the Chinese market; enforcement for residential luminaires is not prescriptive. The same RG0–RG3 risk group framework is used.GB/T 20145-2006 — Photobiological safety of lamps and lamp systems (SAC/SAMR — recommended standard, equivalent to IEC 62471:2006) | Photobiological safety of LED lamps and luminaires is technically assessed against IEC 62471 (Photobiological safety of lamps and lamp systems), which INN may adopt as a Chilean NCh standard and which an SEC-authorized certifier may reference where the product class requires it. IEC 62471 classifies products by risk group from RG0 (Exempt) to RG3 (High risk) based on blue light weighted radiance and irradiance. Chile does not operate an EU-Ecodesign-style horizontal legal mandate that makes a documented risk-group classification a standalone market-entry obligation for all luminaires; rather, photobiological safety is addressed within the SEC product safety assessment where applicable to the specific product. Manufacturers should confirm with the certifier whether an IEC 62471 risk-group assessment is required for their product class.IEC 62471 — Photobiological safety of lamps and lamp systems (risk group classification; may be adopted as NCh by INN) SEC product safety assessment (Chile — photobiological safety addressed where applicable to the product class) |
Both China (GB/T 20145) and Chile (IEC 62471 where adopted) share the same IEC 62471 RG0–RG3 technical framework, so the test physics is harmonised. The key difference is legal status and process: in China GB/T 20145 is a recommended, non-mandatory standard; in Chile photobiological safety is handled within the SEC product safety assessment for the relevant product class rather than as a horizontal EU-Ecodesign-style standalone mandate. A Chinese manufacturer should (1) confirm with the SEC-authorized certifier whether an IEC 62471 risk-group assessment is required for the specific luminaire; (2) keep a defensible risk-group classification on file; (3) recognise that a CN GB/T 20145 report may serve as technical reference but the Chilean certifier determines acceptance within the SEC file. Most general-purpose LED luminaires fall in RG0/RG1 with no usage restrictions.[INFORMATIONAL] Photobiological safety in Chile is assessed against IEC 62471 (RG0–RG3) where adopted as NCh and where the SEC product safety scope requires it; Chile has no EU-Ecodesign-style horizontal standalone risk-group mandate. The IEC 62471 framework is shared with China's recommended GB/T 20145-2006, so the test physics is harmonised, but the Chilean certifier determines acceptance within the SEC file. Confirm whether a risk-group assessment is required for the specific product class and keep a defensible classification on file. | Superintendencia de Electricidad y Combustibles (SEC), Chile2026-06-15 · reference |
| Blue Light Hazard Labelling — No Mandatory Chilean Label Requirement | China's mandatory China Energy Label (CEL) under GB 30255-2019 does not include a blue light hazard class either; the Chinese labelling regime focuses on energy efficiency grades (Grade 1–3) and lumen output. There is no CN regulatory requirement to display a photobiological risk-group class on luminaire packaging.GB 30255-2019 — Energy efficiency requirements for LED room luminaires (SAC/SAMR — no blue light class requirement) | Unlike the EU (where Delegated Regulation (EU) 2019/2015 Annex VI mandates a blue light hazard class on the energy label), Chile does not impose a mandatory blue light hazard class on the lighting product label. The Chilean energy efficiency label (Ministry of Energy / SEC) focuses on the efficiency class and luminous efficacy, and the SEC safety certification focuses on electrical safety. Where photobiological risk is relevant (RG2/RG3 products), appropriate warnings and usage instructions are good practice and may be addressed within the SEC safety file, but there is no Chilean regulatory obligation to print an EU-style blue light hazard class on packaging. Manufacturers should confirm current SEC and Ministry of Energy labelling content requirements for their product class.Chile — no mandatory blue light hazard class labelling requirement equivalent to EU Delegated Regulation (EU) 2019/2015 Annex VI IEC 62471 risk group (technical reference for any voluntary warnings on RG2/RG3 products) |
On this point Chile and China are aligned in the negative: neither mandates an EU-style blue light hazard class on the product label. There is therefore no Chile-specific blue light labelling gap for a Chinese manufacturer — unlike for EU export, no blue light class needs to be added to the Chilean label. The residual obligation is good-practice safety warnings for any RG2/RG3 product, which may be handled in the SEC safety file. Manufacturers should not assume an EU blue light label is required for Chile, but should confirm the exact mandatory content of the Chilean energy label and any SEC marking requirements for the specific product class, as these can change.[INFORMATIONAL] Chile, like China, does not mandate an EU-style blue light hazard class on the lighting product label — so there is no Chile-specific blue light labelling step for a Chinese manufacturer (unlike EU export). Good-practice safety warnings remain advisable for any RG2/RG3 product and may be handled in the SEC safety file. Confirm the exact mandatory content of the Chilean energy label and any SEC marking requirements for the specific product class, as these can change. | Ministerio de Energia de Chile (Chile Ministry of Energy)2026-06-15 · reference |
| Hazardous Substance Restriction — No Horizontal RoHS Regime in Chile | China's GB/T 26572-2011 (Requirements for concentration limits for certain restricted substances in EEE) covers 6 substances (Pb, Hg, Cd, Cr(VI), PBB, PBDE) with the same thresholds as EU RoHS, and China RoHS 2 (SJ/T 11364-2014) requires a hazardous-substance disclosure label (orange/green) on EEE sold in China. As of 2026 the 4 EU phthalates are not yet in the CN mandatory restricted list. China therefore does operate a substance-disclosure regime, whereas Chile does not have a comparable horizontal EEE substance-restriction regime.GB/T 26572-2011 — Requirements for concentration limits for certain restricted substances in EEE (SAC/SAMR — 6 substances) SJ/T 11364-2014 — Marking for the restricted use of hazardous substances in electronic and electrical products (China RoHS 2 disclosure label) |
Chile does not operate a horizontal RoHS-style regulation restricting hazardous substances (lead, mercury, cadmium, hexavalent chromium, PBB, PBDE, phthalates) in electrical and electronic equipment as a condition of market access. There is no Chilean equivalent to EU Directive 2011/65/EU (RoHS 2) for LED luminaires. Chile's product approval centres on SEC electrical safety certification, not substance restriction. Substance controls that exist in Chile are sector-specific (e.g., general hazardous-substance and chemical handling, mercury controls under the Minamata Convention to which Chile is a party) rather than an EEE-wide homogeneous-material restriction. Manufacturers should not assume an affirmative RoHS test is mandated for Chilean market entry, but should verify any product-specific or contractual substance requirements.Chile — no horizontal RoHS-equivalent restriction for EEE (no Chilean counterpart to EU Directive 2011/65/EU) Minamata Convention on Mercury (Chile is a party — sector mercury controls, not an EEE-wide RoHS) |
Here the direction of the gap is reversed relative to the EU comparison: Chile imposes NO horizontal RoHS substance restriction or disclosure-label requirement, while China DOES operate GB/T 26572 + the China RoHS 2 disclosure label. A Chinese manufacturer already complying with China RoHS therefore generally meets or exceeds any substance expectation Chile imposes at the regulatory level, because Chile has no equivalent mandate. Practically: (1) no Chilean RoHS test or RoHS DoC is required for SEC market access; (2) the China RoHS disclosure label is a CN-market artefact and is not required for Chile; (3) however, Chilean importers/retailers or downstream contracts may still ask for substance data voluntarily, and mercury-containing products are subject to Minamata-related controls. Verify any contractual or product-specific substance requirement rather than a horizontal legal one.[INFORMATIONAL] Chile has no horizontal RoHS-style substance-restriction or disclosure-label regime for LED luminaires — unlike China's GB/T 26572 + China RoHS 2 disclosure label and unlike EU RoHS. No Chilean RoHS test or DoC is required for SEC market access. A manufacturer already meeting China RoHS generally exceeds Chile's regulatory expectation. Watch for voluntary buyer/importer substance requests and mercury controls under the Minamata Convention; verify product-specific or contractual requirements rather than a horizontal legal one. | Superintendencia de Electricidad y Combustibles (SEC), Chile2026-06-15 · reference |
| Chemical / SVHC Supply-Chain Notification — No REACH-Style Duty in Chile | China likewise does not have a direct REACH Article 33 article-level SVHC notification equivalent. The closest CN instruments are MEE Order No. 12 (2020, Measures for the Environmental Management of New Chemical Substances) for new substance registration and GB 30981-2020 (classification and labelling of chemicals). Neither creates a duty to notify B2B customers when an SVHC is present in an article above 0.1% w/w. On this point China and Chile are similar: both lack a REACH-style article SVHC duty.MEE Order No. 12 (2020) — Measures for the Environmental Management of New Chemical Substances (China) GB 30981-2020 — Rules for the classification and labelling of chemicals (China) |
Chile does not impose a REACH-style Substance of Very High Concern (SVHC) supply-chain notification obligation (no equivalent to REACH Article 33 / the ECHA Candidate List / the SCIP database). There is no Chilean legal duty for an LED luminaire supplier to proactively notify business customers or consumers when an article contains a listed substance above 0.1% w/w, because Chile does not maintain a REACH-equivalent candidate list for articles. Chilean chemical regulation focuses on classification, labelling, transport, and handling of hazardous chemicals/substances (workplace and substance-handling rules) rather than article-level SVHC communication. Manufacturers should still meet general Chilean chemical safety and any GHS-aligned classification/labelling obligations applicable to chemicals as such.Chile — no REACH-style SVHC article notification duty (no equivalent to REACH Article 33, ECHA Candidate List, or SCIP database) Chilean hazardous-chemical classification/labelling and handling rules (GHS-aligned, applicable to chemicals as such, not article-level SVHC communication) |
Both Chile and China lack a REACH-style article-level SVHC notification duty, so there is no Chile-specific SVHC supply-chain obligation for a Chinese LED luminaire exporter to add — unlike for EU export, where REACH Article 33 and SCIP apply. The residual considerations are: (1) general Chilean hazardous-chemical classification/labelling/handling rules apply to chemicals as such (not to articles), so finished luminaires are largely outside this; (2) Chilean importers, retailers, or international buyers may contractually request substance data even though the law does not compel it; (3) mercury-containing components fall under Minamata-related controls. The compliance burden here is materially lower than the EU REACH regime — but manufacturers should confirm no contractual or sector-specific substance-reporting clause applies to their shipment.[INFORMATIONAL] Chile has no REACH-style article-level SVHC supply-chain notification duty (no Article 33 / ECHA Candidate List / SCIP equivalent), and neither does China — so there is no Chile-specific SVHC step to add for a Chinese exporter, unlike EU export. General Chilean hazardous-chemical rules are GHS-aligned and apply to chemicals as such, not finished articles. Watch for voluntary buyer/importer substance requests, contractual clauses, and Minamata mercury controls; verify these rather than assuming a horizontal legal SVHC duty. | Gobierno de Chile (Ministerio de Salud — hazardous chemical classification/labelling framework)2026-06-15 · reference |
| SEC Certification Process and Technical File vs CCC / CQC | In China, the primary mandatory certification for residential luminaires is CCC (China Compulsory Certification), administered by CNCA, requiring third-party certification by a CNCA-authorized body such as CQC. Voluntary CQC certification exists for products outside mandatory CCC. Wireless-enabled luminaires additionally require SRRC type approval. CCC certification bodies and reports are specific to the Chinese regime and are not recognised by the Chilean SEC certifiers.CNCA-C10-01 — CCC certification rules for luminaires (CNCA/CQC) SRRC type approval — required for wireless-enabled luminaires in China |
SEC certification for LED luminaires in Chile requires: (1) the product to be certified by an SEC-authorized certification body against the applicable NCh/IEC safety standards (e.g., NCh adoptions of IEC 60598 for luminaires, IEC 62560 for self-ballasted LED lamps); (2) submission of a technical file with test reports from an SEC-accepted laboratory; (3) issuance of the SEC certificate and use of the SEC seal/marking; (4) registration of the certified product so it appears in the SEC product registry, after which it may be lawfully marketed and sold in Chile; (5) for in-scope products, the Ministry of Energy efficiency label; (6) for wireless products, separate SUBTEL approval. Importation and sale typically require a Chilean importer/representative responsible for placing the certified product on the market. The certifier-led third-party process (not pure self-declaration) is the standard route.SEC mandatory product certification regime (Chile — certifier-led third-party certification + SEC seal + product registry) IEC 60598 / IEC 62560 (adopted as NCh by INN — safety basis for SEC certification) Ministry of Energy efficiency label (in-scope products) + SUBTEL approval (wireless products) |
Chilean SEC certification and Chinese CCC are both certifier-led third-party regimes, so the process shape is closer than the EU's self-declaration route — but they run in parallel with no mutual recognition: separate certificates, test reports, certifiers, and product registries are needed for each market. Key Chile-specific points: (1) certification must be done by an SEC-authorized body and the product entered in the SEC registry before lawful sale; (2) IEC/NCh safety reports must be acceptable to the SEC certifier — Chinese CCC reports are generally not directly transferable, though shared IEC 60598/62560 test physics can reduce re-testing; (3) a Chilean importer/local representative is typically required to place the product on the market; (4) the Ministry of Energy efficiency label and (for wireless) SUBTEL approval are separate obligations. Unlike the EU, there is no RoHS DoC, no REACH/SCIP, and no EU Authorised Representative concept — but the SEC certificate + seal + registry entry are mandatory.[INFORMATIONAL] Chilean SEC certification for LED luminaires is a certifier-led third-party process: certify against NCh/IEC 60598/62560 with an SEC-authorized body, file test reports from an SEC-accepted lab, obtain the SEC seal, and enter the SEC product registry before lawful sale; add the Ministry of Energy efficiency label and SUBTEL approval where in scope. SEC and CCC are parallel non-mutual regimes — Chinese CCC reports are generally not directly transferable, though shared IEC test physics can reduce re-testing. There is no RoHS DoC, REACH/SCIP, or EU-style Authorised Representative requirement in Chile, but a Chilean importer/representative is typically needed. | Superintendencia de Electricidad y Combustibles (SEC), Chile2026-06-15 · reference |
| Electrical Safety — General Luminaire (SEC + NCh/IEC 60598) | China's current general luminaire safety standard is GB/T 7000.1-2023 (Luminaires — Part 1: General requirements and tests), replacing GB 7000.1-2015 from 1 January 2026. Both editions are based on IEC 60598-1. CCC obligations for in-scope luminaires are governed by the applicable CNCA rules (CNCA-C10-01) rather than by the GB/T designation alone, and CCC testing is conducted at CNCA-authorized laboratories. The CCC conformity assessment process and documentation are specific to the Chinese regime.GB/T 7000.1-2023 — Luminaires — Part 1: General requirements and tests (replaces GB 7000.1-2015 from 1 January 2026; based on IEC 60598-1) CNCA-C10-01 — CCC certification rules for luminaires |
LED luminaires sold in Chile must obtain SEC (Superintendencia de Electricidad y Combustibles) mandatory product certification for electrical safety before being marketed. Safety is assessed against the IEC 60598 series (Luminaires — Part 1: General requirements and tests, plus relevant Part 2 sections) adopted as Chilean NCh standards by INN. Requirements cover protection against electric shock (creepage and clearance, insulation resistance, touch current), thermal endurance, mechanical strength, and terminals — consistent with the international IEC 60598 base. The product is certified by an SEC-authorized certification body using test reports from an SEC-accepted laboratory; once certified, the product carries the SEC seal and is entered in the SEC registry. Chile operates at 220 V, 50 Hz single-phase, so products designed for 220 V/50 V China single-phase mains share the same frequency and a similar single-phase nominal voltage, easing electrical design alignment.SEC mandatory product certification regime (Chile — electrical safety certification + SEC seal) IEC 60598-1 — Luminaires — Part 1: General requirements and tests (adopted as NCh by INN) |
Both the Chilean NCh adoption of IEC 60598 and China's GB/T 7000.1 derive from the same IEC 60598-1 base, so the technical safety content is largely harmonised and the shared 220 V single-phase / 50 Hz environment eases electrical design transfer. The gap is process and jurisdiction: SEC certification must be performed by an SEC-authorized body and the product entered in the SEC registry before lawful sale; Chinese CCC certificates and GB/T 7000.1 reports are not directly transferable to the Chilean SEC file, though the common IEC test physics can reduce re-testing where the SEC certifier accepts the report basis. A Chilean importer/local representative is typically needed to place the product on the market. Manufacturers should confirm the exact NCh edition of IEC 60598 in force and which Part 2 section applies to their luminaire type.[INFORMATIONAL] LED luminaires require SEC mandatory product certification for electrical safety against NCh/IEC 60598 before lawful sale in Chile, with the SEC seal and SEC registry entry. The IEC 60598-1 base is shared with China's GB/T 7000.1, and the common 220 V/50 Hz single-phase environment eases design transfer, but Chinese CCC certificates are not directly transferable to the SEC file. Certification must be via an SEC-authorized body and a Chilean importer/representative is typically required. Confirm the current NCh edition and applicable Part 2 section for the luminaire type. | Superintendencia de Electricidad y Combustibles (SEC), Chile2026-06-15 · reference |
| Self-Ballasted LED Lamp / Driver Safety (NCh/IEC 62560 + IEC 61347-2-13) | China's equivalents are GB 24906-2010 (Self-ballasted LED lamps for general lighting services > 50 V — Safety specifications), technically aligned with IEC 62560, and GB 19510.14-2014 (Control gear for lamps — Part 2-13: DC or AC supplied electronic controlgear for LED modules), aligned with IEC 61347-2-13. CCC certification may be required for self-ballasted LED lamps and drivers in certain power/voltage ranges sold in the Chinese market. These Chinese CCC reports are specific to the CN regime and are not Chilean SEC approval documents.GB 24906-2010 — Self-ballasted LED lamps for general lighting services > 50 V — Safety specifications (SAC/SAMR, aligned with IEC 62560) GB 19510.14-2014 — Control gear for lamps — Part 2-13: DC or AC supplied electronic controlgear for LED modules (SAC/SAMR, aligned with IEC 61347-2-13) |
Self-ballasted LED lamps (retrofit bulbs) and LED control gear/drivers intended for the Chilean market are certified for safety under the SEC regime against the relevant IEC standards adopted as NCh: IEC 62560 (Self-ballasted LED lamps for general lighting services > 50 V — Safety specifications) for retrofit LED lamps, and IEC 61347-2-13 (Lamp controlgear — Part 2-13: particular requirements for DC or AC supplied electronic controlgear for LED modules) for drivers. These cover insulation class, dielectric strength, thermal endurance, fault conditions, and safety marking. A driver sold as a separate product is certified in its own right; when integrated into a luminaire, its safety evidence forms part of the luminaire SEC file. SEC certification by an authorized body, the SEC seal, and registry entry are required before sale.IEC 62560 — Self-ballasted LED lamps for general lighting services > 50 V — Safety specifications (adopted as NCh by INN) IEC 61347-2-13 — Lamp controlgear — Part 2-13: particular requirements for DC or AC supplied electronic controlgear for LED modules (adopted as NCh by INN) SEC mandatory product certification regime (Chile) |
The Chilean NCh adoptions (IEC 62560, IEC 61347-2-13) and the Chinese standards (GB 24906, GB 19510.14) share the same IEC technical base, so the safety test content is largely harmonised. The gap is jurisdictional and procedural: (1) a self-ballasted LED lamp or a standalone driver must be certified under the SEC regime by an SEC-authorized body and entered in the SEC registry before sale — Chinese CCC certificates are not directly transferable, though shared IEC physics can reduce re-testing where the SEC certifier accepts the report basis; (2) confirm the exact NCh editions of IEC 62560 / IEC 61347-2-13 in force; (3) a driver integrated into a luminaire is documented within the luminaire SEC file rather than separately. The shared 220 V single-phase / 50 Hz mains reduces electrical redesign relative to markets with different voltage/frequency.[INFORMATIONAL] Self-ballasted LED lamps and standalone LED drivers require SEC certification in Chile against NCh adoptions of IEC 62560 and IEC 61347-2-13 respectively, with the SEC seal and registry entry before sale. The IEC base is shared with China's GB 24906 and GB 19510.14, so the safety test content is largely harmonised, but Chinese CCC certificates are not directly transferable to the SEC file. A driver integrated into a luminaire is documented within the luminaire SEC file. Confirm the current NCh editions and route via an SEC-authorized certifier and Chilean importer/representative. | Superintendencia de Electricidad y Combustibles (SEC), Chile2026-06-15 · reference |
E-E-A-T
Named editorial review
Pending named reviewer
Official regulator, standards body, notified body, customs, or primary legal source preferred. Local PDFs are not accepted.
Editorial controlsRows must include publisher, official URL, access date, verification flag, and last_verified before human_reviewed can be true.
SOURCES
Official-source register.
- Ministerio de Energia de Chile (Chile Ministry of Energy) · accessed 2026-06-15 · reference · used in 2 rows
- Superintendencia de Electricidad y Combustibles (SEC), Chile · accessed 2026-06-15 · reference · used in 7 rows
- Subsecretaria de Telecomunicaciones (SUBTEL), Chile · accessed 2026-06-15 · reference · used in 1 rows
- Gobierno de Chile (Ministerio de Salud — hazardous chemical classification/labelling framework) · accessed 2026-06-15 · reference · used in 1 rows