CROSS-STANDARD public interest · Wireless / IoT device
China-to-Indonesia Wireless / IoT Device Compliance Gap Matrix (KOMINFO / SDPPI)
AI-compiled from official public sources — cross-checked by multiple AI models, not human-verified. Informational only; see disclaimer. Public-interest, source-linked comparison of common China wireless and IoT device documentation against Indonesian SDPPI mandatory type approval (sertifikasi perangkat), SNI EMC and radio performance standards, SNI electrical safety, SDPPI red-box labelling, IMEI registration for cellular devices, and in-country importer (Importir Umum / Importir Produsen) obligations under KOMINFO / SDPPI.
Dataset 2026-06-11
Last verified 2026-06-17
6 rows
GAP MATRIX
Compliance Gap Matrix
| Compliance item | Common China baseline | Indonesia (KOMINFO / SDPPI) | Gap / action | Source + verification date |
|---|---|---|---|---|
| Electrical Safety — SNI IEC 62368-1 / SNI IEC 60950-1 (BSN / SDPPI) | China's electrical safety framework for IT and consumer electronics primarily relies on GB 4943.1 (Information technology equipment — Safety, aligned with IEC 60950-1) and, for products transitioning to the IEC 62368-1 scope, the emerging GB 62368 adoption under SAC. CCC (China Compulsory Certification) under CNCA covers safety for most mains-powered electrical and electronic products including wireless devices. CCC safety testing is conducted at CNCA-designated, CNAS-accredited laboratories. Chinese CCC safety certificates and GB 4943.1 test reports are not recognised in Indonesia and do not satisfy SNI IEC 62368-1 or SPPT-SNI requirements.GB 4943.1 — Information technology equipment — Safety (aligned with IEC 60950-1, SAC/MIIT) GB 62368 (in adoption) — Audio/video, information and communication technology equipment — Safety (aligned with IEC 62368-1) CCC (China Compulsory Certification) safety — CNCA; tested at CNCA-designated CNAS-accredited laboratories |
Wireless and IoT devices with mains power supply or internal batteries above applicable voltage or energy thresholds must comply with Indonesian electrical safety standards under the SNI (Standar Nasional Indonesia) framework administered by BSN (Badan Standardisasi Nasional). The primary applicable standard for audio/video, information and communication technology equipment is SNI IEC 62368-1:2018 (adopted from IEC 62368-1:2018), which supersedes SNI IEC 60950-1 for IT equipment. For household appliances with an integrated wireless or IoT module, the SNI IEC 60335 series may additionally apply. Electrical safety testing must be conducted at BSN-accredited (LSPro) or SDPPI-recognised laboratories. Safety compliance evidence is submitted as part of the SDPPI sertifikasi perangkat application for powered wireless devices. For products falling under SNI wajib (mandatory SNI) product categories, a separate SPPT-SNI (Sertifikat Produk Penggunaan Tanda SNI) — issued by a BSN-accredited certification body — is required in addition to SDPPI type approval. No mutual recognition agreement exists between Indonesia and CE (EU Low Voltage Directive / EN 62368-1), UL/NRTL (US), or Chinese CCC safety certifications.SNI IEC 62368-1:2018 — Audio/video, information and communication technology equipment — Safety requirements (BSN, adopted from IEC 62368-1:2018) SNI IEC 60950-1:2013 — Information technology equipment — Safety (legacy, still referenced for older product scopes not yet transitioned to IEC 62368-1) SNI IEC 60335-1 / SNI IEC 60335-2 series — Household and similar electrical appliances — Safety (applicable for wireless-enabled home appliances, BSN) Peraturan Pemerintah No. 34 Tahun 2018 tentang Sistem Standardisasi dan Penilaian Kesesuaian Nasional (National Standardization and Conformity Assessment System Regulation — SNI wajib mechanism) Peraturan Menteri Kominfo No. 16 Tahun 2018 — SDPPI type approval requiring safety test evidence for powered wireless devices |
Indonesian SNI IEC 62368-1 and Chinese GB 4943.1 share a common IEC 60950-1 / IEC 62368-1 lineage, but there is NO administrative equivalence or MRA. Chinese CCC safety certificates and GB 4943.1 test reports are not accepted by SDPPI or BSN. For products in mandatory SNI wajib scope, a separate SPPT-SNI from a BSN-accredited LSPro is required in addition to SDPPI type approval — this is a distinct certification process. Common exporter error: assuming CE Low Voltage Directive (EN 62368-1) compliance satisfies Indonesia — it does not. SNI-aligned safety testing at a BSN-accredited or SDPPI-recognised laboratory, plus an SPPT-SNI certificate where applicable, must be obtained before market entry.[INFORMATIONAL] SNI electrical safety compliance (SNI IEC 62368-1 or applicable series) is mandatory for powered wireless devices as part of the SDPPI sertifikasi perangkat process. Chinese CCC safety certificates and GB 4943.1 test reports are not recognised by SDPPI or BSN. Products in mandatory SNI wajib categories additionally require SPPT-SNI from a BSN-accredited LSPro. No mutual recognition exists with CE Low Voltage Directive, US UL/NRTL listings, or Chinese CCC. | BSN (Badan Standardisasi Nasional) — SNI IEC 62368-1 / SNI IEC 60950-12026-06-17 · reference |
| EMC — SNI CISPR-Aligned Emission Standards | China's EMC framework for electronics uses GB/T 9254 (Information technology equipment — Radio disturbance characteristics, aligned with CISPR 22/32) for emissions and GB 17625.1 (aligned with IEC 61000-3-2) for harmonic current emissions. Products in scope of CCC must include EMC compliance tested at CNCA-designated, CNAS-accredited laboratories. GB/T 9254 test reports and CCC EMC certificates are not accepted in Indonesia. While the CISPR technical lineage of SNI and GB/T standards is broadly similar, the certification processes, accreditation bodies, and administrative requirements are entirely separate frameworks.GB/T 9254 — Information technology equipment: Radio disturbance characteristics (aligned with CISPR 22/32, SAC/MIIT) GB 17625.1 — Electromagnetic compatibility — Limits — Harmonic current emissions (aligned with IEC 61000-3-2) CCC (China Compulsory Certification) EMC requirements under CNCA — tested at CNCA-designated CNAS-accredited laboratories |
Wireless and electronic devices sold in Indonesia must comply with applicable SNI (Standar Nasional Indonesia) EMC standards for radiated and conducted emission limits. SNI standards are adopted by BSN (Badan Standardisasi Nasional) and largely align with CISPR/IEC international standards. The primary EMC references for IT, multimedia, and consumer electronics are SNI CISPR 32 (Multimedia equipment — Electromagnetic disturbance characteristics — Limits and methods of measurement, adopted from CISPR 32) and SNI CISPR 35 (Multimedia equipment — Immunity characteristics). Legacy SNI CISPR 22 may still be cited for older device categories. Testing must be conducted at SDPPI-accredited or BSN-recognised laboratories. EMC compliance evidence is submitted as part of the SDPPI sertifikasi perangkat application — there is no self-declaration route equivalent to CE Declaration of Conformity for Indonesia. SDPPI may also reference ETSI or IEC standards where SNI adoption is incomplete.SNI CISPR 32:2016 — Multimedia equipment: Electromagnetic disturbance characteristics — Limits and methods of measurement (adopted from CISPR 32:2015, BSN) SNI CISPR 35:2017 — Multimedia equipment: Immunity characteristics — Limits and methods of measurement (BSN) SNI CISPR 22 — Information technology equipment: Radio disturbance characteristics (legacy, partially superseded by CISPR 32) Peraturan Menteri Kominfo No. 16 Tahun 2018 — SDPPI type approval requiring EMC test evidence submission |
SNI CISPR-aligned EMC requirements in Indonesia are technically similar to GB/T 9254 (both derived from CISPR 32), but no administrative equivalence or MRA exists. SDPPI requires EMC test reports from SDPPI-accredited or BSN-authorised laboratories; Chinese CNAS reports are not directly accepted without review by an Indonesian-recognised body. There is no self-declaration route: EMC compliance evidence must be submitted within the SDPPI sertifikasi perangkat application. Common gap: exporters assume CISPR technical alignment means test data are interchangeable — they are not; fresh testing or accredited laboratory review in Indonesia is required for each device model.[INFORMATIONAL] SNI CISPR-aligned EMC compliance is mandatory in Indonesia as part of the SDPPI type approval process. While the technical standards share CISPR lineage with Chinese GB/T 9254, Chinese CNAS test reports and CCC EMC certificates are not accepted. Testing or accredited-laboratory data review at an SDPPI-accredited facility is required per device model. No self-declaration route exists. | BSN (Badan Standardisasi Nasional) — SNI CISPR 32 / SNI CISPR 352026-06-17 · reference |
| Radio Performance and Frequency Use — SDPPI Persyaratan Teknis (Technical Requirements) | Chinese radio frequency type approval (SRRC, administered by MIIT / State Radio Regulation of China) mandates permitted frequency bands, transmit power limits, and spurious emission requirements per GB/T and YD/T standards for each device category. SRRC approval is mandatory for all radio transmitting devices sold or imported into China. China's 5 GHz WLAN permissions and DFS requirements are defined under the SRRC framework (aligned with ETSI in many respects). Chinese SRRC approval and the underlying YD/T / GB/T radio performance standards are not recognised by Indonesian SDPPI.SRRC (State Radio Regulation of China) radio type approval — MIIT, under Regulations of the People's Republic of China on the Administration of Radio Frequencies YD/T technical standards for terminal equipment radio performance (MIIT / CAICT) GB/T radio disturbance and performance standards applicable to wireless devices |
All radio-frequency transmitting devices sold in Indonesia must comply with SDPPI persyaratan teknis (technical requirements) specifying permitted frequency bands, maximum transmit power (EIRP), channel plans, spurious emission limits, and — for 5 GHz WLAN — mandatory Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC). SDPPI publishes separate persyaratan teknis for each device category: 2.4 GHz WLAN, 5 GHz WLAN, Bluetooth / BLE, cellular bands, and other unlicensed IoT bands (including 433 MHz and 915 MHz where applicable). The 2.4 GHz WLAN band in Indonesia is 2400–2483.5 MHz with a maximum EIRP of 100 mW (20 dBm). The 5 GHz WLAN bands and DFS requirements follow ITU Radio Regulations but are independently enforced by SDPPI. Radio performance testing is a mandatory component of the SDPPI sertifikasi perangkat application and must be conducted at SDPPI-accredited laboratories.Peraturan Menteri Kominfo No. 7 Tahun 2021 tentang Penggunaan Spektrum Frekuensi Radio (Radio Frequency Spectrum Use Regulation 2021) Peraturan Menteri Kominfo No. 2 Tahun 2021 tentang Rencana Induk Penggunaan Spektrum Frekuensi Radio (National Radio Frequency Spectrum Master Plan 2021) SDPPI Persyaratan Teknis Perangkat Telekomunikasi — per-category technical requirements published on sdppi.kominfo.go.id (covering WLAN 2.4 GHz, WLAN 5 GHz, Bluetooth, cellular, IoT) ITU Radio Regulations — referenced by SDPPI for band allocation alignment |
Chinese SRRC radio performance approval and frequency allocation are not recognised by Indonesian SDPPI. While both China and Indonesia broadly follow ITU Radio Regulations, specific frequency band allocations, maximum transmit power limits, permitted DFS channels for 5 GHz, and channel plans may differ between the two markets. The specific SDPPI persyaratan teknis for each device category must be met and verified by testing at an SDPPI-accredited laboratory. Common gap: 5 GHz devices with SRRC or CE approval may not have been tested against all DFS channels required by SDPPI, requiring additional testing. Devices transmitting in bands outside SDPPI-permitted allocations will be refused type approval.[INFORMATIONAL] SDPPI radio performance compliance (persyaratan teknis) is mandatory for all wireless devices as part of the sertifikasi perangkat process. Chinese SRRC approvals are not recognised. SDPPI-specific technical requirements per device category govern permitted bands, transmit power limits, and 5 GHz DFS/TPC mandates. Testing must be conducted at an SDPPI-accredited laboratory for each device model. | SDPPI (Ditjen Sumber Daya dan Perangkat Pos dan Informatika) — Persyaratan Teknis Perangkat2026-06-17 · reference |
| In-Country Importer Obligation — Importir Umum / Importir Produsen (PT Entity, API Licence) | China's domestic market does not impose a mandatory in-country importer registration requirement on Chinese manufacturers selling locally. Chinese manufacturers interact directly with SRRC, MIIT, CNCA, and CNAS-accredited laboratories for domestic certifications. For products exported to Indonesia, Chinese manufacturers must separately establish or appoint an Indonesian PT entity as Importir Umum or Importir Produsen holding an API licence. This obligation has no parallel in the Chinese domestic regulatory or export compliance chain and must be resolved before any SDPPI type approval application can be submitted on behalf of a foreign manufacturer.No equivalent mandatory in-country importer registration applies to Chinese manufacturers in the Chinese domestic market For reference: Chinese export formalities handled by customs declaration under PRC Customs Law (Hai Guan Fa) — importer obligation sits with the Indonesian side |
Foreign manufacturers of wireless devices cannot import their products directly into Indonesia under their own foreign legal name. An Indonesian legal entity — either an Importir Umum (IU, general importer for resale) or Importir Produsen (IP, producer importer for own production or distribution) — must be registered as the importer of record for all telecommunications equipment. The in-country importer must hold an API (Angka Pengenal Importir) licence issued by the Ministry of Trade (Kemendag): API-U for general importers or API-P for producer importers. The importer entity must be a PT (Perseroan Terbatas) or CV registered under Indonesian law. The importer's name must appear on the PIB (Pemberitahuan Impor Barang) customs import declaration filed with DJBC and may be required in the SDPPI sertifikasi perangkat application as the authorised representative. The historical term POSTEL (Pos dan Telekomunikasi) referred to the predecessor agency now operating as SDPPI under KOMINFO; the type approval certification portal retains the domain sertifikasi.postel.go.id. Without a qualifying Indonesian entity as importer, DJBC will refuse customs clearance for telecommunications equipment.Undang-Undang No. 36 Tahun 1999 tentang Telekomunikasi — Article requiring certified devices and importer declaration Peraturan Menteri Kominfo No. 16 Tahun 2018 — Authorised representative / importer declaration in sertifikasi perangkat application Peraturan Menteri Perdagangan (Kemendag) on API — Angka Pengenal Importir regime (API-U and API-P) governing general and producer importers Peraturan Menteri Perdagangan No. 18 Tahun 2021 tentang Barang Dilarang Ekspor dan Barang Dilarang Impor (Restricted import categories requiring API licence for telecommunications equipment) |
The Indonesian Importir Umum / Importir Produsen requirement with API licence is a mandatory structural obligation for all foreign device manufacturers — not merely a documentation gap. A PT or CV entity must be legally registered in Indonesia with the relevant Ministry of Trade (Kemendag) import licences before any SDPPI certification application can proceed. Chinese exporters who lack an established Indonesian distributor, trading partner, or subsidiary cannot initiate SDPPI type approval or complete customs clearance. Common error: Chinese exporters ship telecommunications equipment using a freight forwarder's PIB without a proper API-licensed importer and without an SDPPI certificate — DJBC will detain and may return the shipment at the exporter's cost.[INFORMATIONAL] An Indonesian PT entity holding an API licence (API-U for Importir Umum or API-P for Importir Produsen) is mandatory for all foreign manufacturers seeking to import wireless devices into Indonesia. This entity must be declared in the SDPPI sertifikasi perangkat application and on the PIB customs declaration filed with DJBC. No equivalent requirement exists in the Chinese domestic regulatory chain. Foreign manufacturers must establish or appoint a qualifying Indonesian legal entity before initiating SDPPI type approval. | SDPPI / KOMINFO — Sertifikasi Perangkat Portal (sertifikasi.postel.go.id)2026-06-17 · reference |
| Product Labelling — SDPPI Red-Box Certification Number, IMEI Marking, and Bahasa Indonesia Documentation | Chinese product labelling for wireless devices in the domestic market includes the SRRC radio type approval number, the CCC mark and certificate number (where applicable), the MIIT NAL (Network Access License) number for terminal equipment connecting to public networks, and required GB-standard safety and EMC symbols. Chinese regulations require that product manuals and safety warnings be provided in Simplified Chinese for the domestic market. None of these Chinese approval marks or labels carry any recognition in Indonesia: the SDPPI red-box certification number is the sole valid compliance marking for the Indonesian market and must be applied — either by re-labelling at the factory or via an Indonesian label supplement — before shipment.SRRC radio type approval number display — required under MIIT radio management regulations CCC mark and certificate number — required for CCC-scope products under CNCA regulations MIIT NAL (Network Access License / 进网许可证) number — required for terminal equipment connecting to public networks Simplified Chinese user manual and safety warnings — required under PRC Consumer Rights Protection Law (No. 15 of 2013) |
All wireless and telecommunications devices that have obtained SDPPI type approval must display the SDPPI certification number in a red-bordered box on the product body, outer packaging, or label before customs clearance and market entry. The red-box SDPPI number is the primary visual compliance indicator inspected by DJBC (Directorate General of Customs and Excise) at Indonesian ports of entry. The certification number must be permanently affixed or printed; where the device is too small to accommodate the label, the certification number may appear on the outer packaging instead. Cellular and mobile devices must additionally display the IMEI number on the device and outer packaging, consistent with PM Kominfo No. 1 of 2020 on IMEI-based control. Under Indonesian consumer protection law (Undang-Undang No. 8 Tahun 1999 tentang Perlindungan Konsumen) and Ministry of Trade regulations, the product user manual, warranty terms, and key safety warnings must be provided in Bahasa Indonesia for consumer-facing products. Products shipped to Indonesia displaying only Chinese SRRC numbers, EU CE marks, or FCC IDs — without the red-box SDPPI certification number — will be detained at Indonesian customs even if the importer holds a valid SDPPI certificate on file.Peraturan Menteri Kominfo No. 16 Tahun 2018 — Article on labelling obligation for certified telecommunications devices (SDPPI certification number in red-bordered box) Peraturan Menteri Kominfo No. 1 Tahun 2020 — IMEI labelling and registration requirement for cellular and mobile devices Undang-Undang No. 8 Tahun 1999 tentang Perlindungan Konsumen (Consumer Protection Law — Bahasa Indonesia product documentation requirement) Peraturan Pemerintah No. 58 Tahun 2001 tentang Pembinaan dan Pengawasan Penyelenggaraan Perlindungan Konsumen (Consumer protection enforcement — labelling and documentation in Bahasa Indonesia) |
The SDPPI red-box certification number is a unique Indonesian labelling requirement with no counterpart in Chinese, EU, or US label regulations. For products destined for Indonesia, the SDPPI number must be physically applied to the product and/or outer packaging — either integrated into production labelling or applied via a separate label supplement — before shipping. A Bahasa Indonesia user manual or manual supplement is required under Indonesian consumer protection law; Simplified Chinese or English-only manuals do not satisfy this obligation. IMEI must additionally appear on cellular device labels. Common exporter error: shipping devices with Chinese SRRC or EU CE labels only and expecting Indonesian customs to accept a certificate shown by the importer — DJBC inspects the physical label; absence of the red-box SDPPI number triggers detention regardless of valid certificate documentation.[INFORMATIONAL] The SDPPI certification number displayed in a red-bordered box on the device label and outer packaging is mandatory for Indonesian customs clearance and market compliance. This must be physically applied before shipment — holding an SDPPI certificate on file without the label affixed to the product results in DJBC detention. A Bahasa Indonesia user manual is additionally required for consumer products under Indonesian consumer protection law. IMEI labelling applies to all cellular devices. Chinese SRRC, CCC, or CE marks do not substitute for the red-box SDPPI number on Indonesian-bound products. | JDIH KOMINFO — PM Kominfo No. 16 Tahun 2018 (Ketentuan Operasional Sertifikasi Perangkat Telekomunikasi)2026-06-17 · reference |
| SDPPI Mandatory Type Approval (Sertifikasi Perangkat Telekomunikasi) | For wireless devices exported from China, the domestic certification chain includes: (1) SRRC (State Radio Regulation of China) type approval issued by MIIT for devices using radio frequencies; (2) MIIT Network Access License (NAL / jin wang xu ke zheng) for terminal equipment connecting to public telecommunications networks; (3) CCC (China Compulsory Certification) under CNCA for products within mandatory CCC scope. Chinese manufacturers hold test reports to GB standards (GB 9254 / GB/T 9254 for EMC; GB 4943.1 for safety) from CNAS-accredited laboratories. None of these Chinese approvals are recognised by Indonesian SDPPI.SRRC radio type approval — MIIT / State Radio Regulation of China (SRRC, under Telecommunications Regulations of PRC) MIIT Network Access License (NAL / 进网许可证) — YD/T terminal equipment standards CCC (China Compulsory Certification) — CNCA / GB 4943.1 safety; GB/T 9254 EMC GB/T 9254 — Information technology equipment EMC (aligned with CISPR 22/32) GB 4943.1 — Information technology equipment safety (aligned with IEC 60950-1) |
All telecommunications and radio devices imported into or sold in Indonesia must obtain mandatory type approval (sertifikasi perangkat telekomunikasi) from SDPPI (Directorate General of Resources and Equipment for Post and Information Technology) under KOMINFO before importation or sale. The requirement covers Wi-Fi, Bluetooth, cellular, IoT, and any device operating in licensed or unlicensed radio frequency bands. Type approval testing must be conducted at SDPPI-accredited laboratories in Indonesia or overseas testing facilities recognised by SDPPI. Upon approval, SDPPI issues a unique certification number that must be displayed in a red-bordered box on the device label and outer packaging. For cellular devices, IMEI registration is additionally required under PM Kominfo No. 1 of 2020. Devices without a valid SDPPI certification number will be detained by Indonesian customs (DJBC — Direktorat Jenderal Bea dan Cukai). There is no mutual recognition agreement (MRA) between Indonesia and CE (EU), FCC (US), or any other major economy. Chinese SRRC, MIIT NAL, CCC, and CE certifications are not recognised and do not substitute for SDPPI type approval.Undang-Undang No. 36 Tahun 1999 tentang Telekomunikasi (Telecommunications Law No. 36 of 1999) Peraturan Menteri Kominfo No. 16 Tahun 2018 tentang Ketentuan Operasional Sertifikasi Perangkat Telekomunikasi (Operational Provisions for Telecommunications Device Certification) Peraturan Menteri Kominfo No. 1 Tahun 2020 tentang Pengendalian Alat dan/atau Perangkat Telekomunikasi yang Tersambung ke Jaringan Bergerak Seluler melalui IMEI (IMEI registration for cellular devices) Peraturan Pemerintah No. 52 Tahun 2000 tentang Penyelenggaraan Telekomunikasi (Government Regulation No. 52 of 2000 on Telecommunications) |
Chinese SRRC, MIIT NAL, and CCC certifications provide zero exemption from Indonesia's mandatory SDPPI type approval (sertifikasi perangkat). A full, separate Indonesian certification is required for every device model. No MRA exists between China and Indonesia for telecommunications device approval. SDPPI-accredited laboratory testing against Indonesian SNI and persyaratan teknis requirements is required. Cellular devices additionally require IMEI registration under PM Kominfo No. 1 of 2020. Common exporter error: submitting Chinese SRRC or EU CE certificates to DJBC — customs will detain shipments without a valid SDPPI certificate number on the label.[INFORMATIONAL] SDPPI type approval (sertifikasi perangkat) is mandatory for all wireless and telecommunications devices before import into or sale in Indonesia. No equivalence exists with CE, FCC, Chinese SRRC, MIIT NAL, or CCC certifications. SDPPI-accredited laboratory testing is required for every device model. IMEI registration applies additionally to all cellular devices. Devices without a valid SDPPI certificate number displayed in a red-bordered box on the label will be detained by DJBC at Indonesian customs. | SDPPI (Ditjen Sumber Daya dan Perangkat Pos dan Informatika) — KOMINFO Indonesia2026-06-17 · reference |
E-E-A-T
Named editorial review
Pending named reviewer
Official regulator, standards body, notified body, customs, or primary legal source preferred. Local PDFs are not accepted.
Editorial controlsRows must include publisher, official URL, access date, verification flag, and last_verified before human_reviewed can be true.
SOURCES
Official-source register.
- BSN (Badan Standardisasi Nasional) — SNI IEC 62368-1 / SNI IEC 60950-1 · accessed 2026-06-17 · reference · used in 1 rows
- BSN (Badan Standardisasi Nasional) — SNI CISPR 32 / SNI CISPR 35 · accessed 2026-06-17 · reference · used in 1 rows
- SDPPI (Ditjen Sumber Daya dan Perangkat Pos dan Informatika) — Persyaratan Teknis Perangkat · accessed 2026-06-17 · reference · used in 1 rows
- SDPPI / KOMINFO — Sertifikasi Perangkat Portal (sertifikasi.postel.go.id) · accessed 2026-06-17 · reference · used in 1 rows
- JDIH KOMINFO — PM Kominfo No. 16 Tahun 2018 (Ketentuan Operasional Sertifikasi Perangkat Telekomunikasi) · accessed 2026-06-17 · reference · used in 1 rows
- SDPPI (Ditjen Sumber Daya dan Perangkat Pos dan Informatika) — KOMINFO Indonesia · accessed 2026-06-17 · reference · used in 1 rows