CROSS-STANDARD public interest · LED luminaire
China-to-Mozambique LED Luminaire Compliance Gap Matrix
AI-compiled from official public sources — cross-checked by multiple AI models, not human-verified. Informational only; see disclaimer. Public-interest, source-linked comparison of common China LED luminaire documentation against Mozambique market-access expectations: INNOQ (Instituto Nacional de Normalizacao e Qualidade) conformity and NM standards that adopt IEC 60598 / 60598-1 / 62560 / 62471, electrical safety, EMC, energy labelling, INCM radio type-approval for wireless luminaires, and Portuguese-language documentation versus Chinese GB standards and CCC certification. Mozambique generally adopts IEC-based standards and does not operate an EU-style horizontal RoHS / chemical regime.
Dataset 2026-06-11
Last verified 2026-06-15
11 rows
GAP MATRIX
Compliance Gap Matrix
| Compliance item | Common China baseline | Mozambique (INNOQ) | Gap / action | Source + verification date |
|---|---|---|---|---|
| Energy Efficiency / Performance of LED Lighting (Mozambique energy programme vs EU-style Ecodesign) | China's equivalent is GB 30255-2019 (Energy efficiency requirements for LED room luminaires), defining three energy-efficiency grades: Grade 1 (highest) ≥90 lm/W; Grade 2 ≥80 lm/W; Grade 3 ≥70 lm/W. Grade 3 is the minimum for market entry in China, and China Energy Label (CEL) registration (administered by SAMR/CQC/CECP) is mandatory for GB 30255-covered products. GB 30255 sets a binding efficacy floor in China but does not comprehensively mandate CRI, lifetime, and power factor in the same horizontal manner as the EU Ecodesign Regulation.GB 30255-2019 — Energy efficiency requirements for LED room luminaires (SAC/SAMR) China Energy Label (CEL) scheme — administered by SAMR/CQC/CECP |
Mozambique does NOT operate an EU-style horizontal Ecodesign regulation that sets binding minimum luminous efficacy, CRI, lifetime, and power-factor thresholds as a precondition for market placement. The nearest lever is energy-efficiency / energy-labelling policy for lighting promoted through INNOQ-adopted NM standards (which mirror IEC performance standards such as IEC 62612 for self-ballasted LED lamps performance) and any national energy-efficiency programme. In practice, INNOQ conformity for regulated electrical products focuses on SAFETY (NM/IEC 60598-1, IEC 62560) rather than on a mandatory efficacy floor. Performance / efficacy expectations, where they apply, are typically tied to public-procurement specifications or an energy-label scheme rather than a horizontal market-access threshold. Exporters should confirm with the in-country importer whether any current Mozambique energy-efficiency minimum or labelling rule applies to the specific lamp/luminaire type.INNOQ (Instituto Nacional de Normalizacao e Qualidade) — adoption of NM standards mirroring IEC performance standards (e.g. IEC 62612 for self-ballasted LED lamp performance) Mozambique energy-efficiency / energy-labelling policy for lighting (where applicable) — confirm current scope with in-country importer |
Unlike the EU, Mozambique does not impose a horizontal Ecodesign efficacy/CRI/lifetime/power-factor floor as a market-access precondition, so a Chinese product meeting GB 30255 Grade 3 (≥70 lm/W) is unlikely to be blocked on efficacy grounds at the Mozambique border — the binding gate is SAFETY conformity (see ledmz-safety) plus, where applicable, an energy-label or procurement-spec expectation. The practical gap runs the other way from the EU case: exporters should NOT assume an EU-equivalent efficacy regulation exists in Mozambique, and should instead confirm (1) whether any Mozambique energy-labelling scheme or national efficiency programme covers the product, (2) what efficacy/labelling level public or institutional tenders specify, and (3) that performance claims on Portuguese-language packaging are substantiated by IEC 62612-type performance test data. China's CEL grade does not transfer to Mozambique; any Mozambique label obligation must be met locally via the in-country importer.[INFORMATIONAL] Mozambique does not impose an EU-style horizontal Ecodesign efficacy/CRI/lifetime/power-factor floor as a precondition for market placement. The binding gate is INNOQ safety conformity built on NM/IEC standards; efficacy and labelling apply only where a Mozambique energy-label scheme, national efficiency programme, or procurement spec covers the product. A Chinese GB 30255 Grade 3 product is unlikely to be blocked on efficacy grounds, but exporters should confirm any applicable Mozambique labelling requirement with the in-country importer and substantiate performance claims with IEC 62612-type test data. China Energy Label registration does not transfer to Mozambique. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
| Energy Label / Product Marking for LED Lighting (Mozambique vs EU EPREL + A-G label) | China's China Energy Label (CEL) under GB 30255-2019 is mandatory for LED room luminaires. Products must be registered with CQC (China Quality Certification Centre) or CECP (China Energy Conservation Programme) before affixing the CEL, which shows Grade 1-3 based on absolute lm/W thresholds. The CEL is administered by SAMR. There is no mutual recognition between the CN CEL registration scheme and any Mozambique energy-label scheme, and the CEL is presented in Chinese rather than Portuguese.GB 30255-2019 — Energy efficiency requirements for LED room luminaires (SAC/SAMR) China Energy Label (CEL) scheme — administered by SAMR/CQC/CECP |
Mozambique does not operate the EU EPREL database or the EU rescaled A-G energy label. Where energy-labelling applies to lighting in Mozambique, it is delivered through a national energy-label / efficiency scheme (promoted via INNOQ-adopted NM standards and any government energy programme) rather than a centralised EU-style product registry. There is no mandatory pre-market database registration equivalent to EPREL. The core mandatory expectations at import are SAFETY conformity and correct Portuguese-language product marking (manufacturer/importer identification, ratings, safety markings, instructions). Any energy-efficiency claim or label shown on packaging should be accurate, substantiated by IEC-based performance test data, and presented in Portuguese. Exporters should confirm with the in-country importer whether a specific Mozambique energy-label format is required for the product category.INNOQ — Mozambique national energy-label / efficiency scheme for lighting (where applicable); confirm current format and scope Portuguese-language product marking and instructions requirement (manufacturer/importer identity, ratings, safety markings) |
There is no Mozambique counterpart to EU EPREL registration, so a Chinese exporter does not face an EPREL-style mandatory pre-market database step for Mozambique. The Chinese CEL is not recognised in Mozambique and is in the wrong language. The real obligations for Mozambique are: (1) accurate Portuguese-language product marking and instructions (this is the firm requirement, not an energy-class registry); (2) where a Mozambique energy-label scheme applies to the product category, presenting that label in the required local format with substantiated efficacy data; (3) ensuring any efficiency claim carried over from CN packaging is re-expressed in Portuguese and is technically defensible. Because Mozambique lacks an EU-style central registry, the documentation burden is lighter than the EU on labelling, but heavier on translation/localisation and on confirming through the in-country importer which (if any) local label rule applies.[INFORMATIONAL] Mozambique operates no EU EPREL-style central registry and no rescaled A-G label. The firm import-stage obligation is accurate Portuguese-language product marking and instructions; a formatted energy label applies only where a national Mozambique scheme covers the product category. The Chinese CEL is not recognised and is in the wrong language. Exporters should confirm with the in-country importer whether a local energy-label format applies, re-express any efficiency claim in Portuguese, and substantiate it with IEC-based performance data. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
| EMC Emissions — CISPR 15 / NM-IEC (Mozambique vs CN GB 17743) | China's equivalent is GB 17743-2017 (Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment), technically aligned with CISPR 15. For luminaires sold in China, GB 17743 compliance is required as part of CCC certification (covering both safety and EMC for relevant categories). Testing must be conducted at CNAS/CMA-accredited laboratories in China. Chinese CCC EMC test reports are not automatically recognised for Mozambique market access — but because both GB 17743 and the Mozambique NM/IEC basis derive from CISPR 15, the underlying limits are largely harmonised.GB 17743-2017 — Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (SAC/SAMR, aligned with CISPR 15) | Mozambique adopts IEC/CISPR-based standards through INNOQ as NM (Norma Mocambicana) standards. For LED lighting radio-disturbance (emissions), the applicable technical basis is CISPR 15 (Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment), the same international parent standard used by the EU (EN 55015) and China (GB 17743). Mozambique does not operate a standalone EU-style EMC Directive; where EMC conformity is required for a regulated product, it is demonstrated against the adopted NM/IEC/CISPR limits as part of INNOQ conformity. Conducted emissions (150 kHz-30 MHz) and radiated emissions limits broadly follow CISPR 15. For luminaires with wireless functionality, radio spectrum and type-approval obligations fall under INCM (Instituto Nacional das Comunicacoes de Mocambique) rather than the lighting EMC standard.CISPR 15 — Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (international parent standard adopted via NM/IEC by INNOQ) INCM (Instituto Nacional das Comunicacoes de Mocambique) — radio spectrum / type-approval authority for wireless-enabled luminaires |
Because GB 17743 and the Mozambique NM/IEC basis both derive from CISPR 15, emission limits are largely harmonised and the technical re-testing burden is low. The key differences are procedural, not technical: (1) Mozambique has no standalone EU-style EMC Directive — EMC is handled within INNOQ conformity for regulated products and confirmed via the in-country importer, so the exporter should establish whether EMC evidence is required for the specific product at import; (2) an IECEE CB test report (with CISPR 15 / IEC 61547 coverage) is the practical international bridge, as Mozambique adopts IEC-based standards — this is more readily accepted than a CCC-only Chinese report; (3) any wireless-enabled luminaire shifts into INCM radio type-approval, a separate regime from lighting-EMC; (4) confirm the lab and report scope are acceptable to the Mozambique importer/authority.[INFORMATIONAL] Mozambique adopts CISPR 15-based emission limits via NM/IEC standards rather than an EU-style EMC Directive, so the limits are largely harmonised with China's GB 17743 and the re-testing burden is low. EMC evidence is provided within INNOQ conformity where required; an IECEE CB test report is the practical international bridge because Mozambique adopts IEC-based standards. Chinese CCC-only EMC reports are not automatically recognised. Wireless-enabled luminaires fall under separate INCM radio type-approval. Confirm scope with the in-country importer. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
| EMC Immunity — IEC 61547 (Mozambique vs CN GB/T 18595) | China's equivalent is GB/T 18595-2014 (General requirements for the electromagnetic immunity of lighting equipment), technically equivalent to IEC 61547:2009. GB/T 18595 is a recommended standard (T = tuijian, recommended) and is less strictly enforced than the CN emissions standard GB 17743. CCC certification for CN luminaires generally focuses more on safety and emissions than immunity. Because Mozambique's basis is also IEC 61547, a product already meeting GB/T 18595 typically meets the same technical levels.GB/T 18595-2014 — General requirements for the electromagnetic immunity of lighting equipment (SAC/SAMR — recommended standard, aligned with IEC 61547:2009) | For lighting-equipment EMC immunity, the relevant international basis is IEC 61547 (Equipment for general lighting purposes — EMC immunity requirements), which Mozambique may adopt as an NM/IEC standard through INNOQ. Tests cover electrostatic discharge (IEC 61000-4-2), electrical fast transient/burst (IEC 61000-4-4), surge (IEC 61000-4-5), conducted RF disturbances (IEC 61000-4-6), power-frequency magnetic field (IEC 61000-4-8), and voltage dips/interruptions (IEC 61000-4-11). Mozambique does not operate a standalone EU-style EMC Directive that makes immunity a horizontal legal precondition; where immunity evidence is expected for a regulated product, it is provided within INNOQ conformity against the adopted IEC 61547 basis. In practice, immunity is often less strictly gated than safety; confirm the requirement for the specific product with the in-country importer.IEC 61547 — Equipment for general lighting purposes — EMC immunity requirements (international basis adopted via NM/IEC by INNOQ where applicable) | Both the Mozambique basis and CN GB/T 18595 derive from IEC 61547, so the technical content is largely identical and a product tested to GB/T 18595 generally meets the same immunity levels — the re-testing burden is minimal. The differences are procedural: (1) Mozambique has no EU-style EMC Directive making immunity a horizontal precondition, so whether immunity evidence is required at all depends on the specific regulated-product treatment under INNOQ — confirm with the in-country importer; (2) an IECEE CB report covering IEC 61547 is the practical bridge given Mozambique's IEC-adopting posture; (3) China's GB/T 18595 is recommended-only and may not have been tested for in a CCC file, so a CN-market product might lack immunity test reports even though it would likely pass. Where immunity evidence is expected, include an IEC 61547 report from an accredited lab in the technical file.[INFORMATIONAL] Mozambique's lighting EMC immunity basis (where applied) is IEC 61547, the same parent standard as China's recommended GB/T 18595, so the technical content is largely identical and the re-testing burden is minimal. Mozambique has no EU-style EMC Directive making immunity a horizontal precondition; immunity evidence is provided within INNOQ conformity where required. An IECEE CB report covering IEC 61547 is the practical bridge. Because GB/T 18595 is recommended-only, a CN-market product may lack immunity test reports even though it would likely pass. Confirm the requirement with the in-country importer. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
| Photobiological Safety — Blue Light Hazard (IEC 62471 Risk Groups) in Mozambique | China has adopted GB/T 20145-2006 (Photobiological safety of lamps and lamp systems), technically equivalent to IEC 62471:2006. GB/T 20145 is a recommended standard (T = tuijian, recommended) and is not universally mandatory for all LED luminaires in the Chinese market. Enforcement and testing obligations are less prescriptive for residential luminaires. Because both China and Mozambique trace to IEC 62471, an existing GB/T 20145 assessment provides a usable technical basis, though it would be re-expressed against the IEC 62471 edition where required.GB/T 20145-2006 — Photobiological safety of lamps and lamp systems (SAC/SAMR — recommended standard, equivalent to IEC 62471:2006) | The international basis for LED photobiological safety is IEC 62471 (Photobiological safety of lamps and lamp systems), which Mozambique may adopt as an NM/IEC standard through INNOQ; IEC 62471-7:2023 adds LED/light-source-specific guidance. The method classifies products into risk groups from RG0 (Exempt — no hazard) through RG3 (High risk) based on blue-light-weighted radiance and irradiance limits. Mozambique does NOT operate an EU-style Ecodesign Regulation or energy-label Annex that makes a photobiological risk-group declaration a horizontal legal precondition for market placement. Where photobiological safety is relevant, it is treated within INNOQ safety conformity (alongside the NM/IEC 60598-1 / IEC 62560 safety basis) rather than as a separate mandatory label class. Exporters should document a defensible IEC 62471 risk-group assessment and confirm any specific requirement with the in-country importer.IEC 62471 — Photobiological safety of lamps and lamp systems (international basis for risk-group classification; adopted via NM/IEC by INNOQ where applicable) IEC 62471-7:2023 — Photobiological safety — Part 7: Light sources and luminaires primarily emitting visible radiation |
Unlike the EU, Mozambique does not make a photobiological risk-group declaration a horizontal mandatory market-access requirement, and there is no Mozambique equivalent to the EU energy-label blue-light-class obligation. Both China (GB/T 20145) and Mozambique's basis derive from IEC 62471, so the technical content is shared and the re-assessment burden is low. The practical points for a Mozambique exporter are: (1) do not assume a mandatory blue-light label is required — confirm with the in-country importer whether photobiological evidence is expected for the product; (2) where the product is high-radiance (e.g. spotlights, high-power directional luminaires), document an IEC 62471 risk-group assessment defensively as part of the safety file; (3) ensure any warnings for RG2/RG3 products appear in Portuguese. Because China's GB/T 20145 is recommended-only, a CN-market product may lack a formal risk-group report even though one is straightforward to produce.[INFORMATIONAL] Mozambique's photobiological-safety basis (where applied) is IEC 62471, the same parent standard as China's recommended GB/T 20145, so the technical content is shared and the re-assessment burden is low. Unlike the EU, Mozambique does not make a risk-group declaration a horizontal mandatory market-access requirement and has no blue-light-class label obligation. Exporters should document a defensible IEC 62471 risk-group assessment within the safety file, present RG2/RG3 warnings in Portuguese, and confirm any specific requirement with the in-country importer. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
| No Mandatory Blue-Light-Class Label in Mozambique (vs EU Delegated Reg 2019/2015) | China's Energy Label (CEL) under GB 30255 does not include a blue-light-hazard class; the Chinese labelling regime focuses on energy-efficiency grades (Grade 1-3) and lumen output. There is no CN regulatory requirement to display photobiological risk-group information on luminaire packaging. In this respect China and Mozambique are alike: neither imposes an EU-style blue-light-class label. The difference is that China mandates the CEL energy grade itself, whereas Mozambique has no central energy-label registry.GB 30255-2019 — Energy efficiency requirements for LED room luminaires (SAC/SAMR — no blue-light-class requirement) | Mozambique has NO mandatory blue-light-hazard-class labelling obligation equivalent to the EU Delegated Regulation (EU) 2019/2015 Annex VI, which since September 2021 has required a plain-language blue-light class (RG0 'No risk' / RG1 'Low risk' / RG2 'Moderate risk') on EU light-source labels. In Mozambique there is no central energy-label registry and no rule mandating that a photobiological class be displayed on luminaire packaging. The applicable obligations at import are SAFETY conformity (INNOQ, NM/IEC 60598-1, IEC 62560) and correct Portuguese-language marking and instructions. Where a product is high-radiance, a manufacturer may still choose to carry IEC 62471-based warnings as good practice, in Portuguese. Confirm with the in-country importer whether any label content is specifically required.No Mozambique equivalent to EU Delegated Regulation (EU) 2019/2015 Annex VI blue-light-class labelling INNOQ safety conformity + Portuguese-language product marking and instructions (applicable import-stage obligations) |
Here Mozambique and China are aligned in the absence of an EU-style blue-light-class label — so unlike the China-to-EU case, there is no new mandatory blue-light label to add for Mozambique. The genuine Mozambique-specific gap relative to a CN-domestic product is language and marking: any safety-relevant warning or instruction must be provided in Portuguese, and product marking must identify the manufacturer/importer and ratings to satisfy INNOQ/import expectations. A Chinese exporter should: (1) NOT spend effort creating an EU-style blue-light label for Mozambique (it is not required); (2) translate any photobiological or safety warnings already carried into Portuguese; (3) confirm with the in-country importer whether the product category triggers any specific label content at all. The overall labelling burden for Mozambique is lighter than the EU on photobiological labelling, but the Portuguese-localisation requirement is firm.[INFORMATIONAL] Mozambique imposes no EU-style mandatory blue-light-hazard-class label, and in this respect aligns with China (neither requires one). So, unlike China-to-EU, there is no new blue-light label to add for Mozambique. The firm import-stage obligations are INNOQ safety conformity and accurate Portuguese-language marking and instructions; any safety/photobiological warning carried on the product should be translated into Portuguese. Confirm with the in-country importer whether the product category triggers any specific label content. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
| Restricted Substances — No EU-Style Horizontal RoHS in Mozambique (vs CN GB/T 26572) | China's restricted-substances framework is GB/T 26572-2011 (Requirements for concentration limits for certain restricted substances in EEE), covering the original 6 RoHS substances (Pb, Hg, Cd, Cr(VI), PBB, PBDE) at the same thresholds as EU RoHS, together with China RoHS 2 (SJ/T 11364-2014) which requires a hazardous-substance disclosure label (orange = contains above threshold / green = below threshold) on EEE sold in China. As of 2026, the 4 phthalates added by EU Directive 2015/863 are not yet in the CN mandatory restricted list. China's regime is primarily a DISCLOSURE/marking regime rather than an EU-style market-access restriction.GB/T 26572-2011 — Requirements for concentration limits for certain restricted substances in EEE (SAC/SAMR — covers original 6 substances) SJ/T 11364-2014 — Marking for the restricted use of hazardous substances in electronic and electrical products (China RoHS 2 disclosure label) |
Mozambique does NOT operate an EU-style horizontal RoHS regime that restricts hazardous substances in electrical and electronic equipment (EEE) as a precondition for market placement. There is no Mozambique counterpart to EU Directive 2011/65/EU (RoHS 2) restricting 10 substances in homogeneous materials, and no national obligation requiring substance testing (lead, mercury, cadmium, hexavalent chromium, PBB, PBDE, or the four phthalates DEHP/BBP/DBP/DIBP) as a horizontal market-access gate. The applicable Mozambique import controls for LED luminaires centre on SAFETY conformity through INNOQ (NM/IEC 60598-1, IEC 62560), correct Portuguese-language marking, and an in-country importer. General product-safety and consumer-protection expectations may still apply, and individual procurement contracts or buyers may impose their own restricted-substances clauses voluntarily; the exporter should confirm any such buyer-driven requirement directly. This row states plainly that there is no horizontal RoHS regulation to satisfy in Mozambique as of the access date.No Mozambique horizontal RoHS regulation equivalent to EU Directive 2011/65/EU (RoHS 2) as of the access date INNOQ safety conformity (NM/IEC 60598-1, IEC 62560) + Portuguese-language marking — the applicable import-stage controls |
The direction of the gap is the OPPOSITE of the China-to-EU case. For the EU, the key gap was the 4 added phthalates a CN product had not been tested for. For Mozambique, there is no horizontal RoHS at all, so a Chinese exporter faces NO new mandatory restricted-substances testing as a Mozambique market-access condition. Practical implications: (1) the Chinese hazardous-substance disclosure label (SJ/T 11364) is in Chinese and is not a Mozambique requirement — it can be omitted or, where retained on packaging, supplemented with Portuguese information; (2) do not over-engineer RoHS compliance for Mozambique on the assumption an EU-style regime exists — it does not; (3) BUT individual buyers, tenders, or international brand owners may contractually require RoHS-style or REACH-style declarations, and some products re-exported onward may later enter RoHS jurisdictions — so an exporter already holding RoHS test data should keep it available as a commercial asset even though Mozambique law does not compel it. Confirm any buyer-specific substance clause directly with the importer/customer.[INFORMATIONAL] Mozambique operates no EU-style horizontal RoHS regime, so there is no mandatory restricted-substances testing as a market-access condition — the direction of this gap is the opposite of China-to-EU. The applicable controls are INNOQ safety conformity and Portuguese-language marking. The Chinese SJ/T 11364 disclosure label is not a Mozambique requirement. Exporters should not over-engineer RoHS compliance for Mozambique, but should keep any existing RoHS data available because individual buyers, tenders, or onward re-export markets may demand it contractually. Confirm any buyer-specific substance clause directly with the importer. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
| Chemical / SVHC Notification — No REACH-Style Regime in Mozambique (vs CN Chemical Rules) | China has no direct equivalent to the REACH SVHC Article 33 supply-chain notification obligation either. The closest CN instruments are the Measures for the Environmental Management of New Chemical Substances (MEE Order No. 12, 2020) on new-substance registration and GB 30981-2020 (Rules for the classification and labelling of chemicals) for hazardous-chemical labelling. None of these create an article-level duty to proactively notify B2B customers when an SVHC exceeds 0.1% w/w in an article. In this respect China and Mozambique are similar: neither imposes a REACH Article 33-style article-level notification duty.MEE Order No. 12 (2020) — Measures for the Environmental Management of New Chemical Substances (China) GB 30981-2020 — Rules for the classification and labelling of chemicals (China) |
Mozambique has NO REACH-style chemical regime and no equivalent to the EU REACH Article 33 obligation to notify business customers or consumers about Substances of Very High Concern (SVHC) present in an article above 0.1% w/w, nor an ECHA-style Candidate List, nor a SCIP-style database. There is therefore no ongoing supply-chain SVHC-screening compliance obligation tied to a national candidate list for LED luminaires entering Mozambique. The applicable Mozambique controls remain INNOQ safety conformity and Portuguese-language marking. Mozambique participates in general international chemicals frameworks (e.g. as a party to relevant multilateral environmental agreements), but these do not create an article-level B2B SVHC-notification duty equivalent to REACH Article 33. Exporters should confirm with the in-country importer whether any specific hazardous-material restriction applies to the product, and treat any REACH-style data they hold as a commercial asset rather than a Mozambique legal requirement.No Mozambique equivalent to EU REACH Regulation (EC) 1907/2006 Article 33 SVHC supply-chain notification, ECHA Candidate List, or SCIP database as of the access date INNOQ safety conformity + Portuguese-language marking — the applicable import-stage controls |
Both China and Mozambique lack a REACH Article 33-style article-level SVHC notification duty, so for a Chinese exporter there is NO new SVHC supply-chain notification obligation created by entering Mozambique — this contrasts sharply with the China-to-EU case where REACH Article 33 / SCIP was a significant ongoing burden. Practical points: (1) do not build a biannual ECHA-Candidate-List screening process for Mozambique purposes — there is no Mozambique candidate list to track; (2) the firm Mozambique obligations remain safety conformity and Portuguese marking; (3) however, if the product is sold to a multinational buyer or destined for onward re-export into the EU or another REACH jurisdiction, REACH obligations may still attach downstream — so an exporter with an established SVHC-screening capability retains a commercial advantage. Confirm directly with the buyer/importer whether any contractual chemical-declaration is required.[INFORMATIONAL] Mozambique has no REACH-style chemical regime, no SVHC candidate list, and no Article 33-style article-level notification duty — and in this respect aligns with China, which also lacks one. So entering Mozambique creates no new SVHC supply-chain obligation, unlike the China-to-EU case. The firm Mozambique controls remain INNOQ safety conformity and Portuguese-language marking. Exporters should not build a Mozambique-specific SVHC-screening process, but should retain any existing capability because downstream multinational buyers or onward re-export into a REACH jurisdiction may still require it. Confirm any contractual chemical declaration directly with the buyer/importer. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
| Conformity Process and Documentation — INNOQ Conformity vs CCC / CQC | In China the primary mandatory certification for luminaires sold in the residential market is CCC (China Compulsory Certification), administered by CNCA (Certification and Accreditation Administration of China) and certified by CNCA-authorised bodies such as CQC (China Quality Certification Centre). Voluntary CQC certification is available for products outside mandatory CCC scope. For wireless-enabled luminaires, SRRC (State Radio Regulation Commission) type approval is additionally required in China. CCC certification bodies and CCC/GB test reports are not automatically recognised for Mozambique INNOQ conformity, although the shared IEC technical base means much of the underlying test evidence is reusable when re-issued in IECEE CB / IEC form.CNCA-C10-01 — CCC certification rules for luminaires (CNCA/CQC) SRRC type approval — required for wireless-enabled luminaires in China |
For Mozambique market access, an LED luminaire exporter should expect: (1) INNOQ-administered conformity for regulated electrical products, built on NM (Norma Mocambicana) standards that adopt IEC (NM/IEC 60598-1 luminaire safety, IEC 62560 self-ballasted lamps, IEC 61347-2-13 LED control gear, CISPR 15 / IEC 61547 EMC, IEC 62471 photobiological); (2) IEC-based test evidence — an IECEE CB Scheme test report with the relevant national differences is the practical international bridge, because Mozambique adopts IEC standards; (3) conformity/import inspection for regulated products, which may include pre-shipment inspection or import verification routed through INNOQ and customs; (4) Portuguese-language product documentation, instructions, markings, and a Declaration that the product meets the applicable NM/IEC standards; (5) an in-country importer of record to handle customs clearance through Maputo, Beira, or Nacala and to interface with INNOQ/INCM; (6) INCM type-approval separately for any wireless-enabled luminaire. There is no published EU-style CE self-declaration mark; conformity is demonstrated through the INNOQ/import-inspection route as confirmed by the importer.INNOQ — Instituto Nacional de Normalizacao e Qualidade: conformity / import inspection for regulated electrical products against NM/IEC standards IECEE CB Scheme test report (IEC 60598-1 / IEC 62560 / IEC 61347-2-13 / CISPR 15 / IEC 61547 / IEC 62471) — practical international bridge INCM (Instituto Nacional das Comunicacoes de Mocambique) — radio type-approval for wireless-enabled luminaires Portuguese-language documentation, instructions, and markings; in-country importer of record |
The CCC and INNOQ processes are parallel and non-mutual — a CCC certificate does not grant Mozambique access. Key Mozambique-specific points relative to the CN-domestic process: (1) the technical bridge is IEC, not GB — an IECEE CB test report is far more useful for Mozambique than a CCC certificate, so an exporter should obtain CB reports covering IEC 60598-1 / 62560 / 61347-2-13 / CISPR 15 / IEC 62471; (2) Portuguese-language documentation and markings are required, replacing Chinese-language CCC artwork; (3) an in-country importer of record is needed to clear customs (Maputo/Beira/Nacala) and interface with INNOQ — this is the Mozambique analogue of needing local representation, comparable in function to the EU Authorised Representative role though grounded in import/conformity rather than CE law; (4) wireless luminaires require INCM type-approval (the Mozambique analogue of China's SRRC); (5) confirm the current INNOQ regulated-product list and import-inspection procedure with the importer, since scope and pre-shipment-inspection requirements can change. Relative to the EU, the documentation burden is lighter (no horizontal RoHS, no REACH, no EPREL, no mandatory blue-light label) but the IEC test evidence, Portuguese localisation, and import-of-record requirements are firm.[INFORMATIONAL] Mozambique market access for LED luminaires runs through INNOQ conformity / import inspection against NM/IEC standards, not an EU-style CE self-declaration and not Chinese CCC. CCC and INNOQ are parallel and non-mutual, but the shared IEC base makes an IECEE CB test report the practical bridge. Firm Mozambique requirements: IEC-based test evidence, Portuguese-language documentation and markings, an in-country importer of record (Maputo/Beira/Nacala), and INCM type-approval for wireless luminaires. The burden is lighter than the EU (no horizontal RoHS, REACH, EPREL, or mandatory blue-light label) but heavier on IEC evidence and Portuguese localisation. Confirm current regulated-product scope and import-inspection procedure with the importer. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
| Electrical Safety — General Luminaire (INNOQ / NM-IEC 60598-1) | China's current general luminaire safety standard is GB/T 7000.1-2023 (Luminaires — Part 1: General requirements and tests), replacing GB 7000.1-2015 from 1 January 2026 and changing the designation from mandatory GB to recommended GB/T; CCC obligations for in-scope luminaires remain governed by the applicable CNCA rules rather than the GB/T designation alone. Self-ballasted LED lamp safety in China is covered by GB 24906 / GB 16915-family rules where applicable. CCC testing is conducted by CNCA-authorised laboratories. Both GB 7000.1 and the Mozambique NM/IEC basis derive from IEC 60598-1, so the underlying safety content is largely shared, but CCC/GB documentation is in Chinese and is not automatically recognised for Mozambique INNOQ conformity.GB/T 7000.1-2023 — Luminaires — Part 1: General requirements and tests (replaces GB 7000.1-2015 from 1 January 2026; recommended GB/T designation) CNCA-C10-01 — CCC certification rules for luminaires |
LED luminaires entering the Mozambique market are expected to meet electrical-safety requirements based on IEC 60598-1 (Luminaires — Part 1: General requirements and tests), adopted through INNOQ as an NM (Norma Mocambicana) standard; self-ballasted LED lamps additionally follow IEC 62560. Key requirements cover protection against electric shock (touch current, insulation resistance, creepage and clearance distances), thermal protection, mechanical strength, and wiring terminals. Conformity is demonstrated within INNOQ conformity / import inspection for regulated electrical products; an IECEE CB Scheme test report to IEC 60598-1 (with any national differences) is the practical international bridge because Mozambique adopts IEC standards. Mozambique uses a 220 V / 50 Hz supply; the 50 Hz frequency matches China, and the 220 V single-phase nominal is similar to China's single-phase, but products rated only for China's three-phase 380 V must be checked against the 220 V single-phase nominal. Portuguese-language safety markings and instructions are required, and an in-country importer of record handles customs clearance.IEC 60598-1 — Luminaires — Part 1: General requirements and tests (adopted via NM/IEC by INNOQ) IEC 62560 — Self-ballasted LED lamps for general lighting services — Safety specifications (adopted via NM/IEC) INNOQ conformity / import inspection for regulated electrical products; IECEE CB test report as practical bridge |
Both GB 7000.1 and the Mozambique NM/IEC basis derive from IEC 60598-1, so the technical safety content is largely shared and re-testing burden is moderate rather than fundamental. Key Mozambique-specific points: (1) the recognised technical bridge is IEC — an IECEE CB report to IEC 60598-1 (and IEC 62560 for lamps) is far more useful to INNOQ than a CCC certificate, which is not automatically recognised; (2) safety markings, ratings, and instructions must be in Portuguese; (3) supply is 220 V / 50 Hz — the 50 Hz frequency matches China so frequency-dependent components need no change, and the 220 V single-phase nominal is similar to China's single-phase, but any product designed around China's three-phase 380 V supply must be re-checked for the 220 V single-phase Mozambique context; (4) creepage/clearance and some test conditions can differ between GB and IEC editions, so existing CN reports may need re-issuing in CB/IEC form; (5) an in-country importer of record is required to clear customs (Maputo/Beira/Nacala) and interface with INNOQ. Confirm whether the specific luminaire type falls within INNOQ's current regulated-product list and any pre-shipment-inspection requirement.[INFORMATIONAL] Electrical safety is the binding gate for Mozambique market access, demonstrated within INNOQ conformity against NM/IEC 60598-1 (and IEC 62560 for self-ballasted lamps). Because both China's GB 7000.1 and the Mozambique basis derive from IEC 60598-1, the safety content is largely shared, but CCC/GB evidence is not automatically recognised — an IECEE CB test report is the practical bridge. Supply is 220 V / 50 Hz: the 50 Hz frequency matches China, but China three-phase 380 V designs must be re-checked for the 220 V single-phase context. Portuguese-language markings/instructions and an in-country importer of record are required. Confirm regulated-product scope and any pre-shipment inspection with the importer. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
| LED Driver / Control Gear Safety (IEC 61347-2-13) for Mozambique | China's equivalent is GB 19510.14-2014 (Control gear for lamps — Part 2-13: Particular requirements for DC or AC supplied electronic controlgear for LED modules), technically aligned with IEC 61347-2-13, together with GB 19510.1 for the general requirements. CCC certification may be required for LED drivers in certain power ranges sold in the Chinese residential market. Chinese CCC test reports under GB 19510.14 are not automatically recognised for Mozambique INNOQ conformity, but the shared IEC 61347-2-13 base means the underlying evidence is largely reusable when re-issued in IECEE CB / IEC form.GB 19510.14-2014 — Control gear for lamps — Part 2-13: Particular requirements for DC or AC supplied electronic controlgear for LED modules (SAC/SAMR) GB 19510.1 — Lamp controlgear — Part 1: General and safety requirements (SAC/SAMR) |
LED drivers (control gear for LED modules) for the Mozambique market are expected to meet safety requirements based on IEC 61347-2-13 (Lamp controlgear — Part 2-13: Particular requirements for DC or AC supplied electronic controlgear for LED modules), adopted via INNOQ as an NM/IEC standard, together with the general control-gear requirements of IEC 61347-1. The standard specifies isolation class, dielectric strength, thermal endurance, and safety marking. Where the driver is sold as a separate product (not integrated into the luminaire), its own safety evidence is expected; where integrated, the driver evidence forms part of the luminaire safety file under IEC 60598-1. Conformity is demonstrated within INNOQ conformity / import inspection; an IECEE CB test report to IEC 61347-2-13 is the practical international bridge. The driver must be rated for the Mozambique 220 V / 50 Hz single-phase supply (50 Hz matches China; verify the input-voltage rating covers 220 V single-phase rather than only a China three-phase configuration). Portuguese-language markings apply.IEC 61347-2-13 — Lamp controlgear — Part 2-13: Particular requirements for DC or AC supplied electronic controlgear for LED modules (adopted via NM/IEC by INNOQ) IEC 61347-1 — Lamp controlgear — Part 1: General and safety requirements INNOQ conformity / import inspection; IECEE CB test report as practical bridge |
EN/IEC and GB 19510.14 are both derived from IEC 61347-2-13, so the technical content is largely harmonised and the re-testing burden is low. Mozambique-specific points: (1) the recognised technical bridge is IEC — an IECEE CB report to IEC 61347-2-13 is more useful to INNOQ than a CCC certificate; (2) if the driver is sold standalone, its own safety evidence is needed; if integrated, it sits within the luminaire IEC 60598-1 file; (3) the driver must be rated for the Mozambique 220 V / 50 Hz single-phase supply — 50 Hz matches China, but confirm the input rating covers 220 V single-phase and is not configured only for a China three-phase 380 V context; (4) Portuguese-language markings apply; (5) Chinese CCC for drivers is power-range dependent, so a CN product may or may not already hold third-party test evidence — obtain a CB report covering the relevant power/voltage range. An in-country importer of record handles clearance. There is no Mozambique RoHS overlay on driver components (see ledmz-rohs).[INFORMATIONAL] LED driver safety for Mozambique is demonstrated within INNOQ conformity against IEC 61347-2-13 (with IEC 61347-1 general requirements). The standard is largely harmonised with China's GB 19510.14, so the re-testing burden is low, but CCC evidence is not automatically recognised — an IECEE CB report is the practical bridge. Standalone drivers need their own safety evidence; integrated drivers sit within the luminaire IEC 60598-1 file. Rate the driver for the Mozambique 220 V / 50 Hz single-phase supply (50 Hz matches China; verify the input rating is not configured only for China three-phase 380 V). Portuguese-language markings and an in-country importer apply; there is no Mozambique RoHS overlay on driver components. | INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique)2026-06-15 · reference |
E-E-A-T
Named editorial review
Pending named reviewer
Official regulator, standards body, notified body, customs, or primary legal source preferred. Local PDFs are not accepted.
Editorial controlsRows must include publisher, official URL, access date, verification flag, and last_verified before human_reviewed can be true.
SOURCES
Official-source register.
- INNOQ — Instituto Nacional de Normalizacao e Qualidade (Mozambique) · accessed 2026-06-15 · reference · used in 11 rows